Dataset Information

Statistical comparison of dissolution profiles to predict the bioequivalence of extended release formulations.

ABSTRACT: Appropriate setting of dissolution specification of extended release (ER) formulations should include precise definition of a multidimensional space of complex definition and interpretation, including limits in dissolution parameters, lag time (t-lag), variability, and goodness of fit. This study aimed to set dissolution specifications of ER by developing drug-specific dissolution profile comparison tests (DPC tests) that are able to detect differences in release profiles between ER formulations that represent a lack of bioequivalence (BE). Dissolution profiles of test formulations were simulated using the Weibull and Hill models. Differential equations based in vivo-in vitro correlation (IVIVC) models were used to simulate plasma concentrations. BE trial simulations were employed to find the formulations likely to be declared bioequivalent and nonbioequivalent (BE space). Customization of DPC tests was made by adjusting the delta of a recently described tolerated difference test (TDT) or the limits of rejection of f2. Drug ka (especially if ka is small), formulation lag time (t-lag), the number of subjects included in the BE studies, and the number of sampled time points in the DPC test were the factors that affected the most these setups of dissolution specifications. Another recently described DPC test, permutation test (PT), showed excellent statistical power. All the formulations declared as similar with PT were also bioequivalent. Similar case-specific studies may support the biowaiving of ER drug formulations based on customized DPC tests.

SUBMITTER: Gomez-Mantilla JD

PROVIDER: S-EPMC4070268 | biostudies-literature | 2014 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Statistical comparison of dissolution profiles to predict the bioequivalence of extended release formulations.

Gomez-Mantilla J D JD Schaefer U F UF Casabo V G VG Lehr T T Lehr C M CM

The AAPS journal 20140523 4

Appropriate setting of dissolution specification of extended release (ER) formulations should include precise definition of a multidimensional space of complex definition and interpretation, including limits in dissolution parameters, lag time (t-lag), variability, and goodness of fit. This study aimed to set dissolution specifications of ER by developing drug-specific dissolution profile comparison tests (DPC tests) that are able to detect differences in release profiles between ER formulations ...[more]

PMID: 24854895

Similar Datasets

Project description:Many solid-dose oral drug products are engineered to release their active ingredients into the body at a certain rate. Techniques for measuring the dissolution or degradation of a drug product in vitro play a crucial role in predicting how a drug product will perform in vivo. However, existing techniques are often labor-intensive, time-consuming, irreproducible, require specialized analytical equipment, and provide only "snapshots" of drug dissolution every few minutes. These limitations make it difficult for pharmaceutical companies to obtain full dissolution profiles for drug products in a variety of different conditions, as recommended by the US Food and Drug Administration. Additionally, for drug dosage forms containing multiple controlled-release pellets, particles, beads, granules, etc. in a single capsule or tablet, measurements of the dissolution of the entire multi-particle capsule or tablet are incapable of detecting pellet-to-pellet variations in controlled release behavior. In this work, we demonstrate a simple and fully-automated technique for obtaining dissolution profiles from single controlled-release pellets. We accomplished this by inverting the drug dissolution problem: instead of measuring the increase in the concentration of drug compounds in the solution during dissolution (as is commonly done), we monitor the decrease in the buoyant mass of the solid controlled-release pellet as it dissolves. We weigh single controlled-release pellets in fluid using a vibrating tube sensor, a piece of glass tubing bent into a tuning-fork shape and filled with any desired fluid. An electronic circuit keeps the glass tube vibrating at its resonance frequency, which is inversely proportional to the mass of the tube and its contents. When a pellet flows through the tube, the resonance frequency briefly changes by an amount that is inversely proportional to the buoyant mass of the pellet. By passing the pellet back-and-forth through the vibrating tube sensor, we can monitor its mass as it degrades or dissolves, with high temporal resolution (measurements every few seconds) and mass resolution (700 nanogram resolution). As a proof-of-concept, we used this technique to measure the single-pellet dissolution profiles of several commercial controlled-release proton pump inhibitors in simulated stomach and intestinal contents, as well as comparing name-brand and generic formulations of the same drug. In each case, vibrating tube sensor data revealed significantly different dissolution profiles for the different drugs, and in some cases our method also revealed differences between different pellets from the same drug product. By measuring any controlled-release pellets, particles, beads, or granules in any physiologically-relevant environment in a fully-automated fashion, this method can augment and potentially replace current dissolution tests and support product development and quality assurance in the pharmaceutical industry.

Project description:Importance:The United States spends more money on medications than any other country. Most extended-release drugs have not consistently shown therapeutic or adherence superiority, and switching these medications to less expensive, generic, immediate-release formulations may offer an opportunity to reduce health care spending. Objective:To evaluate Medicare Part D and Medicaid spending on extended-release drug formulations and the potential savings associated with switching to generic immediate-release formulations. Design, Setting, and Participants:This cross-sectional study used the 2012 to 2017 Medicare Part D Drug Event and Medicaid Spending and Utilization data sets to analyze 20 extended-release drugs with 37 Medicare formulations and 36 Medicaid formulations. Only cardiovascular, diabetes, neurologic, and psychiatric extended-release drugs saving at most 1 additional daily dose compared with their immediate-release counterparts were included. Extended-release drugs with therapeutic superiority were excluded. Analyses were conducted from January to December 2019. Main Outcomes and Measures:Estimated Medicare Part D and Medicaid savings from switching extended-release to immediate-release drug formulations between 2012 and 2017. Results:Of the 6252 drugs screened for eligibility from the 2017 Medicaid Drug Utilization database and the 2017 Medicare Part D database, 67 drugs with extended-release formulations that were identified in the Medicare data set (20 distinct drugs with 37 formulations [19 brand, 18 generic]) were included in the analysis. In 2017, Medicare Part D spent $2.2 billion and Medicaid spent $952 million (a combined $3.1 billion) on 20 extended-release drugs. Between 2012 and 2017, Medicare Part D and Medicaid spent $12 billion and $5.9 billion, respectively, on extended-release formulations. Switching from brand-name to generic extended-release formulations was estimated to be associated with a $247 million reduction in Medicare spending and $299 million reduction in Medicaid spending in 2017, whereas switching all brand-name and generic extended-release formulations to immediate-release formulations in both Medicare and Medicaid was estimated to reduce spending by $2.6 billion ($1.8 billion for Medicare and $836 million for Medicaid) in 2017. During the study period, the estimated spending reduction associated with switching all patients receiving extended-release formulations (brand name extended-release and generic extended-release) to generic immediate-release formulations was $13.7 billion ($8.5 billion from Medicare and $5.2 billion from Medicaid). Conclusions and Relevance:The findings suggest that switching from extended-release drug formulations to therapeutically equivalent immediate-release formulations when available represents a potential option to reduce Medicare and Medicaid spending.

Project description:Background and objectiveA novel tiotropium bromide monodose capsule dry powder inhaler (DPI) formulation and device have been developed. The formulation was based on a spray-dried matrix that enhances the aerosolizaton properties, allowing a less active tiotropium metered dose (13 µg/capsule) while maintaining the same delivered dose (10 µg/actuation). This study describes the pharmacokinetic bioequivalence to the reference product.MethodsThis randomized, two-stage, crossover, semi-replicate (three-way) study was performed in healthy volunteers. In each study period, subjects received a single dose of two capsules (20 μg delivered dose) of the study medication, separated by a 14-day washout period: tiotropium 10 μg delivered dose (Laboratorios Liconsa, Spain) and Spiriva HandiHaler(®) (Boehringer Ingelheim Pharma GmbH & Co KG, Germany). Blood samples were obtained up to 48 h post-dose to evaluate the comparative bioavailability. Tiotropium was measured in plasma by means of dual stage liquid-liquid extraction followed by the two-dimensional ultra-high performance liquid chromatography sensitive sub-pg/mL bioanalytical method. The main pharmacokinetic parameters were maximum plasma concentration (C max), area under the concentration-time curve (AUC) from time zero hours to the last observed concentration at time t (AUC t ), and AUC from time zero hours to 30 min (AUC0.5). Bioequivalence was accepted if the 90.20 % confidence interval (CI) for the ratio test/reference of the primary pharmacokinetic parameters lay within the acceptance range of 80-125 %. Safety assessment was a secondary endpoint.ResultsA total of 30 subjects were randomized and bioequivalence was demonstrated for all primary pharmacokinetic parameters: C max (CI 87.26-106.60 %), AUC t (CI 101.33-111.64 %), and AUC0.5 (CI 97.95-113.49 %). Both study treatments were well tolerated (four non-serious adverse events [AEs] were reported in four subjects: one AE before any product administration, two AEs after test product administration; and one AE after reference product administration).ConclusionsBoth products containing tiotropium 10 µg delivered-dose DPI were bioequivalent and showed good tolerability and a similar safety profile.

Dataset Information

Statistical comparison of dissolution profiles to predict the bioequivalence of extended release formulations.

Publications

Statistical comparison of dissolution profiles to predict the bioequivalence of extended release formulations.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets