Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Utilization of structural steel in buildings.

ABSTRACT: Over one-quarter of steel produced annually is used in the construction of buildings. Making this steel causes carbon dioxide emissions, which climate change experts recommend be reduced by half in the next 37 years. One option to achieve this is to design and build more efficiently, still delivering the same service from buildings but using less steel to do so. To estimate how much steel could be saved from this option, 23 steel-framed building designs are studied, sourced from leading UK engineering firms. The utilization of each beam is found and buildings are analysed to find patterns. The results for over 10?000 beams show that average utilization is below 50% of their capacity. The primary reason for this low value is 'rationalization'-providing extra material to reduce labour costs. By designing for minimum material rather than minimum cost, steel use in buildings could be drastically reduced, leading to an equivalent reduction in 'embodied' carbon emissions.

SUBMITTER: Moynihan MC

PROVIDER: S-EPMC4075790 | biostudies-literature | 2014 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Utilization of structural steel in buildings.

Moynihan Muiris C MC Allwood Julian M JM

Proceedings. Mathematical, physical, and engineering sciences 20140801 2168

Over one-quarter of steel produced annually is used in the construction of buildings. Making this steel causes carbon dioxide emissions, which climate change experts recommend be reduced by half in the next 37 years. One option to achieve this is to design and build more efficiently, still delivering the same service from buildings but using less steel to do so. To estimate how much steel could be saved from this option, 23 steel-framed building designs are studied, sourced from leading UK engin ...[more]

PMID: 25104911

Similar Datasets

New Insights in the Long-Term Atmospheric Corrosion Mechanisms of Low Alloy Steel Reinforcements of Cultural Heritage Buildings.

Project description:Reinforcing clamps made of low alloy steel from the Metz cathedral and corroded outdoors during 500 years were studied by OM, FESEM/EDS, and micro-Raman spectroscopy. The corrosion product layer is constituted of a dual structure. The outer layer is mainly constituted of goethite and lepidocrocite embedding exogenous elements such as Ca and P. The inner layer is mainly constituted of ferrihydrite. The behaviour of the inner layer under conditions simulating the wetting stage of the RH wet/dry atmospheric corrosion cycle was observed by in situ micro-Raman spectroscopy. The disappearance of ferrihydrite near the metal/oxide interface strongly suggests a mechanism of reductive dissolution caused by the oxidation of the metallic substrate and was observed for the first time in situ on an archaeological system.

| S-EPMC5554051 | biostudies-literature

Progressive structural capacity loss assessment-A framework for modern reinforced concrete buildings.

Project description:By the virtue of burgeoning terrorism, the exponential growth of advanced weaponry, and allied aids for explosions, it is quite evident that infrastructural facilities in the world have increasingly become more susceptible to sabotaging activities. The ever enhancing employment of reinforced concrete (RC) in the construction industry around the globe, the progressive collapse mechanisms, and respective mitigation strategies in the context of terrorism have garnered quite an attraction by the structural engineering community. The proficiency to envisage the complete collapse under the chain reaction of structural failures, partial collapse of key structural members, or the strength degradation of fundamental structural elements under the blast or impact loading can deliver significant information to cope with partial or complete structural failure. It is quite convenient to say that during the service life, a structure may experience extreme loading conditions. The current study has proposed a new methodology to cover the effect of uncertainty involved in loading on key structural elements of new and complex structures by emphasizing a very realistic structural capacity loss mechanism that allows the incremental reduction in the structural capacities of pivotal structural elements against any sort of impact loading instead of their complete annihilation. To demonstrate the application of the proposed methodology, a 13-story complex structure was selected that was comprised of a diverse structural configuration. The outcomes and results ensured the structural integrity against the applied loadings, as well as the effectiveness of the proposed methodology.

| S-EPMC6277131 | biostudies-literature

Automated BIM-based structural design and cost optimization model for reinforced concrete buildings.

Project description:The process of optimizing building designs requires developing several architectural and structural layout alternatives. Traditionally, limited number of design iterations can be conducted manually, which is time consuming and results in non-optimum designs in terms of limited functionality or high costs. The goal of this research is to develop an advanced Building Information Modeling (BIM) model for automating and optimizing design of building layouts and structural elements to reach minimum construction cost while abiding by the functionality constraints of the architectural design. The developed model integrates concepts from structural design, BIM modeling, and computer programming into one advanced optimization framework. The model was tested and validated in 11 case studies and is found to reduce the structural materials cost by up to 15% per floor without compromising the defined space requirements.

| S-EPMC9751273 | biostudies-literature

Magnetic Stress Sensing System for Nondestructive Stress Testing of Structural Steel and Steel Truss Components Based on Existing Magnetism.

Project description:To detect the stress of steel structures and members using the existing magnetism, a magnetic stress sensing system integrating a magnetic flux induction coil, a magnetic flux measurement device, a loaded device, and data acquisition software was developed. The magnetic coupling test research was carried out for different grades of structural building and bridge steel specimens to establish the magnetic stress flux mathematical model, and the fitting equation of the magnetic flux changes with the positions of different sections of specimens was analyzed. Furthermore, a practical formula for stress detection was obtained through the experiments. Meanwhile, on these bases, the typical steel truss structure model of a Bailey beam was designed and manufactured under different working conditions, nondestructive online stress testing was carried out, and the stress of the model structure and its members was measured by strain and magnetic flux tests to obtain the curves of the test results for the stress-strain and magnetic stress flux, respectively. The results of these two methods are in good agreement with each other. The stress of the steel truss model structure was analyzed and calculated using the finite element method. The results agreed well with the experimental results from the magnetic stress sensing system-the maximum error was about 5%, which meets the requirements of engineering applications.

| S-EPMC7412352 | biostudies-literature

Mouse Lung Response to Stainless Steel and Mild Steel Welding Fume

Project description:A/J mice are genetically predisposed to spontaneous and/or chemically-induced lung tumors while C57BL/6J (B6) mice are resistant. This genetic disparity provides a unique scenario to identify molecular mechanisms associated with the lung response to welding fume at the transcriptome level.

2010-04-30 | GSE20174 | GEO

Mechanical Testing of Composite Steel and Reactive Powder Concrete Structural Element.

Project description:Reactive powder concrete (RPC), typically with higher compressive strength, is particularly attractive to structural engineers to apply them in infrastructures for enhancing their resistance under severe environments and loads. The main objective of the initial study presented in the paper was to investigate the behavior of two types of these new cementitious materials differing in the nature of microfibers. The RPC mixes were reinforced with steel and then with basalt microfibers. To evaluate the structural performance of developed unconventional materials, properties were investigated experimentally and compared with the control normal concrete mix. Mechanical tests indicated that dispersing fine fibers for making RPC, a mean compressive strength of 198.3 MPa and flexural strength 52.6 MPa or 23.2 MPa, respectively, were developed after 28 days of standard curing at ambient temperatures. In composite structures consisting of steel girders and a concrete slab, it is necessary to prevent the relative slip at the steel and concrete interface using shear connectors. The very high RPC strength enabled a material saving, weight-reduced application of precast construction, and particularly effective joint to steel beams. The investigation of such shear connection efficiency, in the case of the higher strength concrete deck, using standard push-out test specimens was executed. Finite element numerical models were developed. The outputs of the studies are presented in the paper.

| S-EPMC7558303 | biostudies-literature

Three-Stage Method Energy–Mass Coupling High-Efficiency Utilization Process of High-Temperature Molten Steel Slag

Project description:High-temperature molten steel slag is a large amount of industrial solid waste containing available heat energy and resources. This paper introduces an efficient and comprehensive utilization process of high-temperature molten steel slag. The waste heat energy in the high-temperature molten steel slag can be fully recovered through the three-stage heat exchange. Through mass balance and energy balance, the theoretical heat recovery rate can reach 81.42 pct when the waste heat stored in steel slag is converted into usable heat energy, and the exergy efficiency of the overall system is 27.93 pct. When the waste heat stored in the steel slag is converted for electric energy, the theoretical heat recovery rate can reach 24.49 pct, and the exergy efficiency of the overall system is 33.83 pct. When the waste heat stored in steel slag is used for cogeneration, the theoretical heat recovery rate can reach 83.98 pct, and the exergy efficiency of the overall system is 38 pct. The normal-temperature solid steel slag produced by the process is easy for iron selection and subsequent high value-added utilization. The solidification of steel slag in this process consumes a large amount of CO2 so that the free calcium oxide (f-CaO) in the steel slag is fixed, which is more conducive to subsequent utilization, thereby achieving the purpose of energy saving and emission reduction. Compared with the utilization of traditional steel slag, this process can better utilize the energy and resources contained in steel slag and provides a new method for fully utilizing the waste heat energy and resource attributes of high-temperature molten steel slag. Supplementary Information The online version of this article (10.1007/s11663-021-02213-7).

| S-EPMC8202223 | biostudies-literature

steel metagenome

Project description:Bacterial communities within steel corrosion tubercles in the Duluth-Superior Harbor

| PRJNA311760 | ENA

Non-Destructive Testing for Documenting Properties of Structural Concrete for Reuse in New Buildings: A Review.

Project description:Reuse in new buildings of structural concrete components from demolitions holds the potential for avoiding the use of raw materials to produce new components, including cement for new castings. Reuse rates are high in the circular economy; however, reusing structural components requires documentation of the properties to equate the safety of using reused and new components. Yet, there is no structured or recognized way to perform the documentation. This paper discusses a framework for the documentation requirements for structural concrete, stating the need for documenting the mechanical properties, concrete heterogeneity, and corrosion status of the reinforcement. The possibility is explored for documenting the required properties while the components are in the donor building by use of non-destructive test (NDT) methods. Such use of NDT methods is new. A comprehensive literature survey on the indirect literature, where NDT methods are used to demonstrate similar concrete properties though related to other purposes, is conducted. The overall conclusion is that the use of NDT methods has the potential to document the requested properties before reuse. The next steps towards implementation of NDT for documenting the properties of structural concrete components for reuse involve research in combined NDT methods and the development of AI systems for data interpretation.

| S-EPMC11313633 | biostudies-literature

CO<sub>2</sub> Mineralization and Utilization using Steel Slag for Establishing a Waste-to-Resource Supply Chain.

Project description:Both steelmaking via an electric arc furnace and manufacturing of portland cement are energy-intensive and resource-exploiting processes, with great amounts of carbon dioxide (CO2) emission and alkaline solid waste generation. In fact, most CO2 capture and storage technologies are currently too expensive to be widely applied in industries. Moreover, proper stabilization prior to utilization of electric arc furnace slag are still challenging due to its high alkalinity, heavy metal leaching potentials and volume instability. Here we deploy an integrated approach to mineralizing flue gas CO2 using electric arc furnace slag while utilizing the reacted product as supplementary cementitious materials to establish a waste-to-resource supply chain toward a circular economy. We found that the flue gas CO2 was rapidly mineralized into calcite precipitates using electric arc furnace slag. The carbonated slag can be successfully utilized as green construction materials in blended cement mortar. By this modulus, the global CO2 reduction potential using iron and steel slags was estimated to be ~138 million tons per year.

| S-EPMC5722910 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data