Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A new sealed lithium-peroxide battery with a co-doped Li2O cathode in a superconcentrated lithium bis(fluorosulfonyl)amide electrolyte.

ABSTRACT: We propose a new sealed battery operating on a redox reaction between an oxide (O(2-)) and a peroxide (O2(2-)) with its theoretical specific energy of 2570 Wh kg(-1) (897 mAh g(-1), 2.87 V) and demonstrate that a Co-doped Li2O cathode exhibits a reversible capacity over 190 mAh g(-1), a high rate capability, and a good cyclability with a superconcentrated lithium bis(fluorosulfonyl)amide electrolyte in acetonitrile. The reversible capacity is largely dominated by the O(2-)/O2(2-) redox reaction between oxide and peroxide with some contribution of the Co(2+)/Co(3+) redox reaction.

SUBMITTER: Okuoka S

PROVIDER: S-EPMC4097343 | biostudies-literature | 2014

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

A new sealed lithium-peroxide battery with a co-doped Li2O cathode in a superconcentrated lithium bis(fluorosulfonyl)amide electrolyte.

Okuoka Shin-ichi S Ogasawara Yoshiyuki Y Suga Yosuke Y Hibino Mitsuhiro M Kudo Tetsuichi T Ono Hironobu H Yonehara Koji K Sumida Yasutaka Y Yamada Yuki Y Yamada Atsuo A Oshima Masaharu M Tochigi Eita E Shibata Naoya N Ikuhara Yuichi Y Mizuno Noritaka N

Scientific reports 20140714

We propose a new sealed battery operating on a redox reaction between an oxide (O(2-)) and a peroxide (O2(2-)) with its theoretical specific energy of 2570 Wh kg(-1) (897 mAh g(-1), 2.87 V) and demonstrate that a Co-doped Li2O cathode exhibits a reversible capacity over 190 mAh g(-1), a high rate capability, and a good cyclability with a superconcentrated lithium bis(fluorosulfonyl)amide electrolyte in acetonitrile. The reversible capacity is largely dominated by the O(2-)/O2(2-) redox reaction ...[more]

PMID: 25023009

Similar Datasets

Superconcentrated electrolytes for a high-voltage lithium-ion battery.

Project description:Finding a viable electrolyte for next-generation 5?V-class lithium-ion batteries is of primary importance. A long-standing obstacle has been metal-ion dissolution at high voltages. The LiPF6 salt in conventional electrolytes is chemically unstable, which accelerates transition metal dissolution of the electrode material, yet beneficially suppresses oxidative dissolution of the aluminium current collector; replacing LiPF6 with more stable lithium salts may diminish transition metal dissolution but unfortunately encounters severe aluminium oxidation. Here we report an electrolyte design that can solve this dilemma. By mixing a stable lithium salt LiN(SO2F)2 with dimethyl carbonate solvent at extremely high concentrations, we obtain an unusual liquid showing a three-dimensional network of anions and solvent molecules that coordinate strongly to Li(+) ions. This simple formulation of superconcentrated LiN(SO2F)2/dimethyl carbonate electrolyte inhibits the dissolution of both aluminium and transition metal at around 5?V, and realizes a high-voltage LiNi0.5Mn1.5O4/graphite battery that exhibits excellent cycling durability, high rate capability and enhanced safety.

| S-EPMC4931331 | biostudies-literature

Dataset on a primary lithium battery cell with a ferroelectric Li-glass electrolyte and MnO2 cathode.

Project description:Here we show the electrochemical data for a Ferroelectric Electrolyte Battery (FEB) Li/ferroelectric Li-glass electrolyte (Li2·99Ba0·005ClO) in cellulose/γ-MnO2 pouch-cell with (2.5 × 2.5 cm2) discharged with a green LED load. The Li2·99Ba0·005ClO electrolyte was synthesized and ground in ethanol. A cellulose matrix was dipped into the Li-glass/ethanol slurry. The γ-MnO2 based cathode was doctor bladed onto a carbon-coated aluminum foil current collector. The cell was assembled in an Ar-filled glove-box and it was not sealed and, therefore, it remained inside the glove-box while discharging with a green LED at approximately 24 °C for 334 days (>11 months) corresponding to 764 mAhg-1 of the active cathode and to 224 mAhg-1 of the electrolyte. The maximum capacity of γ-MnO2 is 209 mAhg-1 and of the MnO2 in the commercial cell is 308 mAhg-1, corresponding to LiMnO2; therefore, the capacity of the FEB is 370% the capacity of the γ-MnO2 and 250% the capacity of the MnO2 in the commercial cell. Moreover, the experimental capacity of the electrolyte minus the maximum capacity of the γ-MnO2 is 163 mAhg-1 of the electrolyte. The potential difference between anode and cathode in a diode is non-linear and dependent on the input current and, therefore, the plateaus in the potential vs time curves do not correspond to thermodynamic equilibria of the electrochemical cell energy source. Nevertheless, the maximum output current as well as the FEB cell's discharge profile may be determined with an LED and compared with traditional battery cells' profiles. The present data might be used by the electrochemical (in particular, battery), electrostatic and ferroelectric materials researchers and industrials for comparative analysis. Furthermore, it can be reused to calculate the maximum energy stored electrostatically in these devices.

| S-EPMC7062924 | biostudies-literature

Potentiometric MRI of a Superconcentrated Lithium Electrolyte: Testing the Irreversible Thermodynamics Approach.

Project description:Superconcentrated electrolytes, being highly thermodynamically nonideal, provide a stringent proving ground for continuum transport theories. Herein, we test an ostensibly complete model of LiPF6 in ethyl-methyl carbonate (EMC) based on the Onsager-Stefan-Maxwell theory from irreversible thermodynamics. We perform synchronous magnetic resonance imaging (MRI) and chronopotentiometry to examine how superconcentrated LiPF6:EMC responds to galvanostatic polarization and open-circuit relaxation. We simulate this experiment using an independently parametrized model with six composition-dependent electrolyte properties, quantified up to saturation. Spectroscopy reveals increasing ion association and solvent coordination with salt concentration. The potentiometric MRI data agree closely with the predicted ion distributions and overpotentials, providing a completely independent validation of the theory. Superconcentrated electrolytes exhibit strong cation-anion interactions and extreme solute-volume effects that mimic elevated lithium transference. Our simulations allow surface overpotentials to be extracted from cell-voltage data to track lithium interfaces. Potentiometric MRI is a powerful tool to illuminate electrolytic transport phenomena.

| S-EPMC8438662 | biostudies-literature

Flexible lithium-oxygen battery based on a recoverable cathode.

Project description:Although flexible power sources are crucial for the realization next-generation flexible electronics, their application in such devices is hindered by their low theoretical energy density. Rechargeable lithium-oxygen (Li-O2) batteries can provide extremely high specific energies, while the conventional Li-O2 battery is bulky, inflexible and limited by the absence of effective components and an adjustable cell configuration. Here we show that a flexible Li-O2 battery can be fabricated using unique TiO2 nanowire arrays grown onto carbon textiles (NAs/CT) as a free-standing cathode and that superior electrochemical performances can be obtained even under stringent bending and twisting conditions. Furthermore, the TiO2 NAs/CT cathode features excellent recoverability, which significantly extends the cycle life of the Li-O2 battery and lowers its life cycle cost.

| S-EPMC4532833 | biostudies-other

A lithium ion battery using an aqueous electrolyte solution.

Project description:Energy and environmental pollution have become the two major problems in today's society. The development of green energy storage devices with good safety, high reliability, high energy density and low cost are urgently demanded. Here we report on a lithium ion battery using an aqueous electrolyte solution. It is built up by using graphite coated with gel polymer membrane and LISICON as the negative electrode, and LiFePO4 in aqueous solution as the positive electrode. Its average discharge voltage is up to 3.1?V and energy density based on the two electrode materials is 258?Wh kg(-1). It will be a promising energy storage system with good safety and efficient cooling effects.

| S-EPMC4916472 | biostudies-literature

Diffusion Control of Organic Cathode Materials in Lithium Metal Battery.

Project description:Organic cathode materials for lithium batteries are becoming increasingly popular because they have high theoretical redox voltage, high gravimetric capacity, low cost, easy processing and sustainability. However, their development is limited by their solubility in the electrolyte, which leads to rapid deterioration of the battery upon cycling. We developed a Janus membrane, which consists of two layers - a commercial polypropylene separator (Celgard) and a 300-600?nm layer of exfoliated graphite that was applied by a simple and environmentally friendly process. The submicron graphite layer is only permeable to Li+ and it drastically improves the battery performance, as measured by capacity retention and high coulombic efficiency, even at 2C rates. Post-mortem analysis of the battery indicates that the new membrane protects the anode against corrosion, and cathode dissolution is reduced. This graphite-based membrane is expected to greatly expedite the deployment of batteries with organic cathodes.

| S-EPMC6362235 | biostudies-literature

Rechargeable quasi-solid state lithium battery with organic crystalline cathode.

Project description:Utilization of metal-free low-cost high-capacity organic cathodes for lithium batteries has been a long-standing goal, but critical cyclability problems owing to dissolution of active materials into the electrolyte have been an inevitable obstacle. For practical utilisation of numerous cathode-active compounds proposed over the past decades, a novel battery construction strategy is required. We have designed a solid state cell that accommodates organic cathodic reactions in solid phase. The cell was successful at achieving high capacity exceeding 200 mAh/g with excellent cycleability. Further investigations confirmed that our strategy is effective for numerous other redox-active organic compounds. This implies hundreds of compounds dismissed before due to low cycleability would worth a re-visit under solid state design.

| S-EPMC3372878 | biostudies-literature

Semi-Flooded Sulfur Cathode with Ultralean Absorbed Electrolyte in Li-S Battery.

Project description:Lean electrolyte (small E/S ratio) is urgently needed to achieve high practical energy densities in Li-S batteries, but there is a distinction between the cathode's absorbed electrolyte (AE) which is cathode-intrinsic and total added electrolyte (E) which depends on cell geometry. While total pore volume in sulfur cathodes affects AE/S and performance, it is shown here that pore morphology, size, connectivity, and fill factor all matter. Compared to conventional thermally dried sulfur cathodes that usually render "open lakes" and closed pores, a freeze-dried and compressed (FDS-C) sulfur cathode is developed with a canal-capillary pore structure, which exhibits high mean performance and greatly reduces cell-to-cell variation, even at high sulfur loading (14.2 mg cm-2) and ultralean electrolyte condition (AE/S = 1.2 µL mg-1). Interestingly, as AE/S is swept from 2 to 1.2 µL mg-1, the electrode pores go from fully flooded to semi-flooded, and the coin cell still maintains function until (AE/S)min ? 1.2 µL mg-1 is reached. When scaled up to Ah-level pouch cells, the full-cell energy density can reach 481 Wh kg-1 as its E/S ? AE/S ratio can be reduced to 1.2 µL mg-1, proving high-performance pouch cells can actually be working in the ultralean, semi-flooded regime.

| S-EPMC7201250 | biostudies-literature

A chemically stabilized sulfur cathode for lean electrolyte lithium sulfur batteries.

Project description:Lithium sulfur batteries (LSBs) are promising next-generation rechargeable batteries due to the high gravimetric energy, low cost, abundance, nontoxicity, and high sustainability of sulfur. However, the dissolution of high-order polysulfide in electrolytes and low Coulombic efficiency of Li anode require excess electrolytes and Li metal, which significantly reduce the energy density of LSBs. Quasi-solid-state LSBs, where sulfur is encapsulated in the micropores of carbon matrix and sealed by solid electrolyte interphase, can operate under lean electrolyte conditions, but a low sulfur loading in carbon matrix (<40 wt %) and low sulfur unitization (<70%) still limit the energy density in a cell level. Here, we significantly increase the sulfur loading in carbon to 60 wt % and sulfur utilization to ∼87% by dispersing sulfur in an oxygen-rich dense carbon host at a molecular level through strong chemical interactions of C-S and O-S. In an all-fluorinated organic lean electrolyte, the C/S cathode experiences a solid-state lithiation/delithiation reaction after the formation of solid electrolyte interphase in the first deep lithiation, completely avoiding the shuttle reaction. The chemically stabilized C/S composite retains a high reversible capacity of 541 mAh⋅g-1 (based on the total weight of the C/S composite) for 200 cycles under lean electrolyte conditions, corresponding to a high energy density of 974 Wh⋅kg-1 The superior electrochemical performance of the chemical bonding-stabilized C/S composite renders it a promising cathode material for high-energy and long-cycle-life LSBs.

| S-EPMC7334495 | biostudies-literature

Lithium-ion battery electrolyte mobility at nano-confined graphene interfaces.

Project description:Interfaces are essential in electrochemical processes, providing a critical nanoscopic design feature for composite electrodes used in Li-ion batteries. Understanding the structure, wetting and mobility at nano-confined interfaces is important for improving the efficiency and lifetime of electrochemical devices. Here we use a Surface Forces Apparatus to quantify the initial wetting of nanometre-confined graphene, gold and mica surfaces by Li-ion battery electrolytes. Our results indicate preferential wetting of confined graphene in comparison with gold or mica surfaces because of specific interactions of the electrolyte with the graphene surface. In addition, wetting of a confined pore proceeds via a profoundly different mechanism compared with wetting of a macroscopic surface. We further reveal the existence of molecularly layered structures of the confined electrolyte. Nanoscopic confinement of less than 4-5 nm and the presence of water decrease the mobility of the electrolyte. These results suggest a lower limit for the pore diameter in nanostructured electrodes.

| S-EPMC5007463 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data