Dataset Information

Non-destructive lichen biomass estimation in northwestern Alaska: a comparison of methods.

ABSTRACT: Terrestrial lichen biomass is an important indicator of forage availability for caribou in northern regions, and can indicate vegetation shifts due to climate change, air pollution or changes in vascular plant community structure. Techniques for estimating lichen biomass have traditionally required destructive harvesting that is painstaking and impractical, so we developed models to estimate biomass from relatively simple cover and height measurements. We measured cover and height of forage lichens (including single-taxon and multi-taxa "community" samples, n?=?144) at 73 sites on the Seward Peninsula of northwestern Alaska, and harvested lichen biomass from the same plots. We assessed biomass-to-volume relationships using zero-intercept regressions, and compared differences among two non-destructive cover estimation methods (ocular vs. point count), among four landcover types in two ecoregions, and among single-taxon vs. multi-taxa samples. Additionally, we explored the feasibility of using lichen height (instead of volume) as a predictor of stand-level biomass. Although lichen taxa exhibited unique biomass and bulk density responses that varied significantly by growth form, we found that single-taxon sampling consistently under-estimated true biomass and was constrained by the need for taxonomic experts. We also found that the point count method provided little to no improvement over ocular methods, despite increased effort. Estimated biomass of lichen-dominated communities (mean lichen cover: 84.9±1.4%) using multi-taxa, ocular methods differed only nominally among landcover types within ecoregions (range: 822 to 1418 g m-2). Height alone was a poor predictor of lichen biomass and should always be weighted by cover abundance. We conclude that the multi-taxa (whole-community) approach, when paired with ocular estimates, is the most reasonable and practical method for estimating lichen biomass at landscape scales in northwest Alaska.

SUBMITTER: Rosso A

PROVIDER: S-EPMC4117546 | biostudies-literature | 2014

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Non-destructive lichen biomass estimation in northwestern Alaska: a comparison of methods.

Rosso Abbey A Neitlich Peter P Smith Robert J RJ

PloS one 20140731 7

Terrestrial lichen biomass is an important indicator of forage availability for caribou in northern regions, and can indicate vegetation shifts due to climate change, air pollution or changes in vascular plant community structure. Techniques for estimating lichen biomass have traditionally required destructive harvesting that is painstaking and impractical, so we developed models to estimate biomass from relatively simple cover and height measurements. We measured cover and height of forage lich ...[more]

PMID: 25079228

Similar Datasets

Project description:Background:Precision agriculture is an emerging research field that relies on monitoring and managing field variability in phenotypic traits. An important phenotypic trait is biomass, a comprehensive indicator that can reflect crop yields. However, non-destructive biomass estimation at fine levels is unknown and challenging due to the lack of accurate and high-throughput phenotypic data and algorithms. Results:In this study, we evaluated the capability of terrestrial light detection and ranging (lidar) data in estimating field maize biomass at the plot, individual plant, leaf group, and individual organ (i.e., individual leaf or stem) levels. The terrestrial lidar data of 59 maize plots with more than 1000 maize plants were collected and used to calculate phenotypes through a deep learning-based pipeline, which were then used to predict maize biomass through simple regression (SR), stepwise multiple regression (SMR), artificial neural network (ANN), and random forest (RF). The results showed that terrestrial lidar data were useful for estimating maize biomass at all levels (at each level, R2 was greater than 0.80), and biomass estimation at leaf group level was the most precise (R2?=?0.97, RMSE?=?2.22 g) among all four levels. All four regression techniques performed similarly at all levels. However, considering the transferability and interpretability of the model itself, SR is the suggested method for estimating maize biomass from terrestrial lidar-derived phenotypes. Moreover, height-related variables showed to be the most important and robust variables for predicting maize biomass from terrestrial lidar at all levels, and some two-dimensional variables (e.g., leaf area) and three-dimensional variables (e.g., volume) showed great potential as well. Conclusion:We believe that this study is a unique effort on evaluating the capability of terrestrial lidar on estimating maize biomass at difference levels, and can provide a useful resource for the selection of the phenotypes and models required to estimate maize biomass in precision agriculture practices.

Project description:BackgroundBiomass accumulation as a growth indicator can be significant in achieving high and stable soybean yields. More robust genotypes have a better potential for exploiting available resources such as water or sunlight. Biomass data implemented as a new trait in soybean breeding programs could be beneficial in the selection of varieties that are more competitive against weeds and have better radiation use efficiency. The standard techniques for biomass determination are invasive, inefficient, and restricted to one-time point per plot. Machine learning models (MLMs) based on the multispectral (MS) images were created so as to overcome these issues and provide a non-destructive, fast, and accurate tool for in-season estimation of soybean fresh biomass (FB). The MS photos were taken during two growing seasons of 10 soybean varieties, using six-sensor digital camera mounted on the unmanned aerial vehicle (UAV). For model calibration, canopy cover (CC), plant height (PH), and 31 vegetation index (VI) were extracted from the images and used as predictors in the random forest (RF) and partial least squares regression (PLSR) algorithm. To create a more efficient model, highly correlated VIs were excluded and only the triangular greenness index (TGI) and green chlorophyll index (GCI) remained.ResultsMore precise results with a lower mean absolute error (MAE) were obtained with RF (MAE = 0.17 kg/m2) compared to the PLSR (MAE = 0.20 kg/m2). High accuracy in the prediction of soybean FB was achieved using only four predictors (CC, PH and two VIs). The selected model was additionally tested in a two-year trial on an independent set of soybean genotypes in drought simulation environments. The results showed that soybean grown under drought conditions accumulated less biomass than the control, which was expected due to the limited resources.ConclusionThe research proved that soybean FB could be successfully predicted using UAV photos and MLM. The filtration of highly correlated variables reduced the final number of predictors, improving the efficiency of remote biomass estimation. The additional testing conducted in the independent environment proved that model is capable to distinguish different values of soybean FB as a consequence of drought. Assessed variability in FB indicates the robustness and effectiveness of the proposed model, as a novel tool for the non-destructive estimation of soybean FB.

Project description:Reliability and economic assessment of the Multiplex® optical sensor employed for non-destructive grape parameters estimates was evaluated in 2017 against a wet chemistry approach in mature vineyards including five cultivars (two whites, two red and one pink colored) assuring a broad range of variation in both technological and phenolic maturity parameters. Among the five Multiplex (Mx) indices evaluated (SFR_R, FLAV, FLAV-UV, ANTH_RG and FERARI) in all cultivars with the exception of Barbera SFR_R showed a significant and linear correlation with total soluble solids (TSS) for TSS ≥ 10 °Brix. Conversely, no significant correlation was found between FLAV and total flavonols concentration, whereas a significant linear correlation was found in Barbera (R2 = 0.66) and Ervi (R2 = 0.63) when the FLAV index was replaced with the FLAV_UV index. Within each cultivar, both ANTH_RG and FERARI showed close correlations with total anthocyanins concentration determined by wet chemistry although under different model shapes. Expressing berry color accumulation on a per skin mass basis rather than for whole berry mass basis, allowed for better separation of behavior of single cultivars and improved accuracy of model fitting for the combination of Barbera and ANTH_RG. A strict linear correlation was always found, within each index, for Mx readings taken on the two opposite sides of the same cluster, implying no significant within-cluster differences in sugar, color and flavonol concentrations. Economic assessment of Mx by means of the Net Present Value (NPV) approach showed that Mx is economically viable for a two hectare vineyard cultivating three red grape varieties (90 samples per year) if its lifetime is at least 7 years. Conversely, if only two red varieties are grown Mx should be used at least 11 years to make it economic suitable. Bigger properties growing a higher number of red varieties are the more interested in Mx as the expected NPV assumes positive values with a Mx usage of minimum 3 years.

Project description:Quantifying the relationship between tree diameter and height is a key component of efforts to estimate biomass and carbon stocks in tropical forests. Although substantial site-to-site variation in height-diameter allometries has been documented, the time consuming nature of measuring all tree heights in an inventory plot means that most studies do not include height, or else use generic pan-tropical or regional allometric equations to estimate height.Using a pan-tropical dataset of 73 plots where at least 150 trees had in-field ground-based height measurements, we examined how the number of trees sampled affects the performance of locally derived height-diameter allometries, and evaluated the performance of different methods for sampling trees for height measurement.Using cross-validation, we found that allometries constructed with just 20 locally measured values could often predict tree height with lower error than regional or climate-based allometries (mean reduction in prediction error = 0.46 m). The predictive performance of locally derived allometries improved with sample size, but with diminishing returns in performance gains when more than 40 trees were sampled. Estimates of stand-level biomass produced using local allometries to estimate tree height show no over- or under-estimation bias when compared with biomass estimates using field measured heights. We evaluated five strategies to sample trees for height measurement, and found that sampling strategies that included measuring the heights of the ten largest diameter trees in a plot outperformed (in terms of resulting in local height-diameter models with low height prediction error) entirely random or diameter size-class stratified approaches.Our results indicate that even limited sampling of heights can be used to refine height-diameter allometries. We recommend aiming for a conservative threshold of sampling 50 trees per location for height measurement, and including the ten trees with the largest diameter in this sample.

Dataset Information

Non-destructive lichen biomass estimation in northwestern Alaska: a comparison of methods.

Publications

Non-destructive lichen biomass estimation in northwestern Alaska: a comparison of methods.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets