Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Investigations of thiol-modified phenol derivatives for the use in thiol-ene photopolymerizations.

ABSTRACT: Thiol-ene photopolymerizations gain a growing interest in academic research. Coatings and dental restoratives are interesting applications for thiol-ene photopolymerizations due to their unique features. In most studies the relative flexible and hydrophilic ester derivative, namely pentaerythritoltetra(3-mercaptopropionate) (PETMP), is investigated as the thiol component. Thus, in the present study we are encouraged to investigate the performance of more hydrophobic ester-free thiol-modified bis- and trisphenol derivatives in thiol-ene photopolymerizations. For this, six different thiol-modified bis- and trisphenol derivatives exhibiting four to six thiol groups are synthesized via the radical addition of thioacetic acid to suitable allyl-modified precursors and subsequent hydrolysis. Compared to PETMP better flexural strength and modulus of elasticity are achievable in thiol-ene photopolymerizations employing 1,3,5-triallyl-1,3,5-triazine-2,4,6-trione (TATATO) as the ene derivative. Especially, after storage in water, the flexural strength and modulus of elasticity is twice as high compared to the PETMP reference system.

SUBMITTER: Reinelt S

PROVIDER: S-EPMC4142978 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Lawsone Derivatives as Efficient Photopolymerizable Initiators for Free-Radical, Cationic Photopolymerizations, and Thiol-Ene Reactions.

Project description:Two new photopolymerizable vinyl (2-(allyloxy) 1,4-naphthoquinone, HNQA) and epoxy (2-(oxiran-2yl methoxy) 1,4-naphthoquinone, HNQE) photoinitiators derived from lawsone were designed in this paper. These new photoinitiators can be used as one-component photoinitiating systems for the free-radical photopolymerization of acrylate bio-based monomer without the addition of any co-initiators. As highlighted by the electron paramagnetic resonance (EPR) spin-trapping results, the formation of carbon-centered radicals from an intermolecular H abstraction reaction was evidenced and can act as initiating species. Interestingly, the introduction of iodonium salt (Iod) used as a co-initiator has led to (1) the cationic photopolymerization of epoxy monomer with high final conversions and (2) an increase of the rates of free-radical polymerization of the acrylate bio-based monomer; we also demonstrated the concomitant thiol-ene reaction and cationic photopolymerizations of a limonene 1,2 epoxide/thiol blend mixture with the HNQA/Iod photoinitiating system.

| S-EPMC8234034 | biostudies-literature

Highly efficient dandelion-like near-infrared light photoinitiator for free radical and thiol-ene photopolymerizations.

Project description:Efficient photopolymerization activated by nonharmful near-infrared (NIR) light is important for various biological applications. Here we propose a NIR light free-radical photoinitiator (PI) fabricated by incorporating oxime-ester coumarin functionality on the surface of upconversion nanoparticles (UCNPs). The coumarin groups of PI absorb the light emitted from the UCNP core, whereas the oxime ester groups undergo cleavage to form radicals. Upon irradiation at 980 nm, the mobile radicals, formed in a manner similar to that of dandelion seed release, initiate both free-radical and thiol-ene photopolymerizations. The superior efficiency of dandelion-like PIs assisted photopolymerizations can be attributed to the reduction of energy loss and increased local PI concentration due to Förster resonance energy transfer process and confinement effect, respectively. Moreover, the proposed PI system can initiate polymerization under low-power NIR laser and reduces the thermal side effects. The possibility of its potential use in deep curing applications was also demonstrated.

| S-EPMC6687813 | biostudies-literature

Thiol-ene photopolymerizations provide a facile method to encapsulate proteins and maintain their bioactivity.

Project description:Photoinitiated polymerization remains a robust method for fabrication of hydrogels, as these reactions allow facile spatial and temporal control of gelation and high compatibility for encapsulation of cells and biologics. The chain-growth reaction of macromolecular monomers, such as acrylated PEG and hyaluronan, is commonly used to form hydrogels, but there is growing interest in step-growth photopolymerizations, such as the thiol-ene "click" reaction, as an alternative. Thiol-ene reactions are not susceptible to oxygen inhibition and rapidly form hydrogels using low initiator concentrations. In this work, we characterize the differences in recovery of bioactive proteins when exposed to similar photoinitiation conditions during thiol-ene versus acrylate polymerizations. Following exposure to chain polymerization of acrylates, lysozyme bioactivity was approximately 50%; after step-growth thiol-ene reaction, lysozyme retained nearly 100% of its prereaction activity. Bioactive protein recovery was enhanced 1000-fold in the presence of a thiol-ene reaction, relative to recovery from solutions containing identical primary radical concentrations, but without the thiol-ene components. When the cytokine TGFβ was encapsulated in PEG hydrogels formed via the thiol-ene reaction, full protein bioactivity was preserved.

| S-EPMC3421966 | biostudies-other

Mechanistic Kinetic Modeling of Thiol-Michael Addition Photopolymerizations via Photocaged "Superbase" Generators: An Analytical Approach.

Project description:A kinetic mechanism and the accompanying mathematical framework are presented for base-mediated thiol-Michael photopolymerization kinetics involving a photobase generator. Here, model kinetic predictions demonstrate excellent agreement with a representative experimental system composed of 2-(2-nitrophenyl)propyloxycarbonyl-1,1,3,3-tetramethylguanidine (NPPOC-TMG) as a photobase generator that is used to initiate thiol-vinyl sulfone Michael addition reactions and polymerizations. Modeling equations derived from a basic mechanistic scheme indicate overall polymerization rates that follow a pseudo-first-order kinetic process in the base and coreactant concentrations, controlled by the ratio of the propagation to chain-transfer kinetic parameters (kp/kCT) which is dictated by the rate-limiting step and controls the time necessary to reach gelation. Gelation occurs earlier as the kp/kCT ratio reaches a critical value, wherefrom gel times become nearly independent of kp/kCT. The theoretical approach allowed determining the effect of induction time on the reaction kinetics due to initial acid-base neutralization for the photogenerated base caused by the presence of protic contaminants. Such inhibition kinetics may be challenging for reaction systems that require high curing rates but are relevant for chemical systems that need to remain kinetically dormant until activated although at the ultimate cost of lower polymerization rates. The pure step-growth character of this living polymerization and the exhibited kinetics provide unique potential for extended dark-cure reactions and uniform material properties. The general kinetic model is applicable to photobase initiators where photolysis follows a unimolecular cleavage process releasing a strong base catalyst without cogeneration of intermediate radical species.

| S-EPMC5630186 | biostudies-literature

Thiol-Yne Photopolymerizations: Novel Mechanism, Kinetics, and Step-Growth Formation of Highly Cross-Linked Networks.

Project description:Radical-mediated thiol-yne step-growth photopolymerizations are utilized to form highly cross-linked polymer networks. This reaction mechanism is shown to be analogous to the thiol-ene photopolymerization; however, each alkyne functional group is capable of consecutive reaction with two thiol functional groups. The thiol-yne reaction involves the sequential propagation of a thiyl radical with either an alkyne or a vinyl functional group followed by chain transfer of the radical to another thiol. The rate of thiyl radical addition to the alkyne was determined to be approximately one-third of that to the vinyl. Chain-growth polymerization of alkyne and vinyl functionalities was only observed for reactions in which the alkyne was originally in excess. Analysis of initial polymerization rates demonstrated a near first-order dependence on thiol concentration, indicating that chain transfer is the rate-determining step. Further analysis revealed that the polymerization rate scaled with the initiation rate to an exponent of 0.65, deviating from classical square root dependence predicted for termination occurring exclusively by bimolecular reactions. A tetrafunctional thiol was photopolymerized with a difunctional alkyne, forming an inherently higher cross-link density than an analogous thiol-ene resin, displaying a higher glass transition temperature (48.9 vs -22.3 degrees C) and rubbery modulus (80 vs 13 MPa). Additionally, the versatile nature of this chemistry facilitates postpolymerization modification of residual reactive groups to produce materials with unique physical and chemical properties.

| S-EPMC2651690 | biostudies-literature

Synthesis and Properties of Side-Chain Functionalized Polytetrahydrofuran Derivatives via the Blue-Light Photocatalytic Thiol-Ene Reaction.

Project description:A series of side-chain functionalized polytetrahydrofuran (PTHF) derivatives were synthesized via the blue-light photocatalytic thiol-ene "click" reaction. Firstly, unsaturated polytetrahydrofuran (UPTHF) as a new unsaturated polyether was synthesized via condensation polymerization of cis-2-butene-1,4-diol and trans-1,4-dibromo-2-butene using potassium hydroxide (KOH) as a catalyst. Then, double bonds in the backbone of UPTHF were modified into different pendant functionality side groups by blue-light photocatalytic thiol-ene "click" reaction using Ru(bpy)₃Cl₂ as a photoredox catalyst, obtaining different side-chain functionalized PTHF derivatives. The structure and the morphology of the side-chain functionalized PTHF derivatives was characterized via Fourier-transform infrared spectra (FTIR), nuclear magnetic resonance (NMR), size exclusion chromatography/multi-angle laser light scattering (SEC/MALLS), and differential scanning calorimeter (DSC). The results showed that the blue-light photocatalytic thiol-ene reaction exhibited high efficiency, and all the unsaturated bonds were modified. Different branch units bestowed different performance of PTHF derivatives; we systematically investigated the thermal properties, pH-triggered and temperature-triggered, self-assembly behaviors of different PTHF derivatives.

| S-EPMC6523133 | biostudies-literature

Functional graphene by thiol-ene click chemistry.

Project description:Thiol-ene click reaction was successfully employed for chemical modification of graphene oxide (GO) by one-step synthesis. Herein, 2,2-azobis(2-methylpropionitrile) (AIBN) was used as thermal catalyst and cysteamine hydrochloride (HS-(CH2 )2 -NH2 HCl) was used as thiol-containing compound, which is incorporated to GO surface upon reaction with the C=C bonds. The hydrochloride acts as protecting group for the amine, which is finally eliminated by adding sodium hydroxide. The modified GO contains both S- and N-containing groups (NS-GO). We found that NS-GO sheets form good dispersion in water, ethanol, and ethylene glycol. These graphene dispersions can be processed into functionalized graphene film. Besides, it was demonstrated that NS-GO was proved to be an excellent host matrix for platinum nanoparticles. The developed method paves a new way for graphene modification and its functional nanocomposites.

| S-EPMC6174942 | biostudies-literature

Expanding Glycomic Investigations through Thiol-Derivatized Glycans.

Project description:N-(2-thioethyl)-2-aminobenzamide (TEAB), a novel glycan auxiliary, was synthesized and its utility was evaluated. The auxiliary was conjugated to glycans by reductive amination with the water-stable reagent 2-picoline borane complex. Glycan products, which ranged from 1 to 7 linked hexoses, were all isolated in yields ranging from 60% to 90% after purification by reverse-phase chromatography. The novel conjugate introduces a convenient, shelf-stable thiol directly onto the desired free glycans with purification advantages and direct modification with efficient reactions through alkenes, halides, epoxides, disulfides, and carboxylates in yields of 49% to 93%. Subsequently, a thiol-selective modification of the BSA protein was used to generate a neoglycoprotein with a bifunctional PEG-maleimide linker. To further illustrate the utility of a thiol motif, 2-thiopyridine activation of a thiol-containing support facilitated the covalent chromatographic purification of labeled glycans in yields up to 63%. Finally, initial proof of concept of implementation in a light printed microarray was explored and validated through FITC-labeled concanavalin A binding. In conclusion, the thiol-functionalized glycans produced greatly expand the diversity of bioconjugation tools that can be developed with glycans and enable a variety of biological investigations.

| S-EPMC9964202 | biostudies-literature

Radical-Mediated Thiol-Ene Strategy: Photoactivation of Thiol-Containing Drugs in Cancer Cells.

Project description:Photoactivated drugs provide an opportunity to improve efficacy alongside reducing side-effects in the treatment of severe diseases such as cancer. Described herein is a photoactivation decaging method of isobutylene-caged thiols through a UV-initiated thiol-ene reaction. The method was demonstrated with an isobutylene-caged cysteine, cyclic disulfide-peptide, and thiol-containing drug, all of which were rapidly and efficiently released under mild UV irradiation in the presence of thiol sources and a photoinitiator. Importantly, it is shown that the activity of histone deacetylase inhibitor largazole can be switched off when stapled, but selectively switched on within cancer cells when irradiated with non-phototoxic light.

| S-EPMC6391964 | biostudies-literature

Thiol-ene enabled detection of thiophosphorylated kinase substrates.

Project description:Protein phosphorylation is a ubiquitous posttranslational modification that regulates cell signaling in both prokaryotes and eukaryotes. Although the study of phosphorylation has made great progress, several major hurdles remain, including the difficulty of the assignment of endogenous substrates to a discrete kinase and of global phosphoproteomics investigations. We have developed a novel chemical strategy for detecting phosphorylated proteins. This method utilizes adenosine 5'-O-(3-thiotriphosphate) (ATP?S), which results in the transfer of a thiophosphate moiety by a kinase to its substrate(s). This group can subsequently be employed as a nucleophilic handle to promote protein detection. To selectively label thiophosphorylated proteins, cellular thiols (e.g., cysteine-containing proteins) must first be blocked. Most common cysteine-capping strategies rely upon the nucleophilicity of the sulfur group and would therefore also modify the thiophosphate moiety. We hypothesized that the radical-mediated thiol-ene reaction, however, would be selective for cysteine over thiophosphorylated amino acids due to the differences in the electronics and pKa values between these groups. Here, we report rapid and specific tagging of thiophosphorylated proteins in vitro following chemoselective thiol capping using the thiol-ene reaction.

| S-EPMC3745782 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data