Ontogeny of aerial righting and wing flapping in juvenile birds.
Ontology highlight
ABSTRACT:
SUBMITTER: Evangelista D
PROVIDER: S-EPMC4155914 | biostudies-literature | 2014 Aug
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:A lamination-based batch-fabrication process of biomimetic wing for flapping-wing micro aerial vehicles is presented. The key benefits of this process are:•One of the advantages of the process is high productivity; eight wings were successfully fabricated simultaneously in our experiment.•The wing fabricated with the reported process is made of soft polyimide and partially reinforced by a titanium layer. This configuration enables the flexible design of the bending stiffness distribution on the wing, which is the key specification for generating lift force.•The reinforcing material can be replaced with other metals or heat-resistant polymers, and the number of layers and layer thicknesses are also variable. This indicates that the reported process can be customized considerably to suit individual needs.
| S-EPMC7649515 | biostudies-literature
Project description:Flapping flight of animals has captured the interest of researchers due to their impressive flight capabilities across diverse environments including mountains, oceans, forests, and urban areas. Despite the significant progress made in understanding flapping flight, high-altitude flight as showcased by many migrating animals remains underexplored. At high-altitudes, air density is low, and it is challenging to produce lift. Here we demonstrate a first lift-off of a flapping wing robot in a low-density environment through wing size and motion scaling. Force measurements showed that the lift remained high at 0.14 N despite a 66% reduction of air density from the sea-level condition. The flapping amplitude increased from 148 to 233 degrees, while the pitch amplitude remained nearly constant at 38.2 degrees. The combined effect is that the flapping-wing robot benefited from the angle of attack that is characteristic of flying animals. Our results suggest that it is not a simple increase in the flapping frequency, but a coordinated increase in the wing size and reduction in flapping frequency enables the flight in lower density condition. The key mechanism is to preserve the passive rotations due to wing deformation, confirmed by a bioinspired scaling relationship. Our results highlight the feasibility of flight under a low-density, high-altitude environment due to leveraging unsteady aerodynamic mechanisms unique to flapping wings. We anticipate our experimental demonstration to be a starting point for more sophisticated flapping wing models and robots for autonomous multi-altitude sensing. Furthermore, it is a preliminary step towards flapping wing flight in the ultra-low density Martian atmosphere.
| S-EPMC10238405 | biostudies-literature
Project description:Slotted wing tips of birds are commonly considered an adaptation to improve soaring performance, despite their presence in species that neither soar nor glide. We used particle image velocimetry to measure the airflow around the slotted wing tip of a jackdaw (Corvus monedula) as well as in its wake during unrestrained flight in a wind tunnel. The separated primary feathers produce individual wakes, confirming a multi-slotted function, in both gliding and flapping flight. The resulting multi-cored wingtip vortex represents a spreading of vorticity, which has previously been suggested as indicative of increased aerodynamic efficiency. Considering benefits of the slotted wing tips that are specific to flapping flight combined with the wide phylogenetic occurrence of this configuration, we propose the hypothesis that slotted wings evolved initially to improve performance in powered flight.
| S-EPMC5454299 | biostudies-literature
Project description:Numerous wingless arthropods as well as diverse vertebrates are capable of mid-air righting. We studied the biomechanics of the aerial righting reflex in first-instar nymphs of the stick insect Extatosoma tiaratum. After being released upside-down, insects reoriented dorsoventrally and stabilized body posture via active modulation of limb positions and associated aerodynamic torques. We identified specific reflexes for bilaterally asymmetric leg displacements which elicit body rotation and subsequently stabilize mid-air posture. Coordinated appendicular movements thus improve torsional manoeuvrability in the absence of wings, as may have characterized the initial origins of controlled aerial behaviour in arthropods. Design of small aerial or multimodal robotic vehicles may similarly benefit from use of such strategies for flight control.
| S-EPMC5206595 | biostudies-literature
Project description:Achieving atmospheric flight on Mars is challenging due to the low density of the Martian atmosphere. Aerodynamic forces are proportional to the atmospheric density, which limits the use of conventional aircraft designs on Mars. Here, we show using numerical simulations that a flapping wing robot can fly on Mars via bioinspired dynamic scaling. Trimmed, hovering flight is possible in a simulated Martian environment when dynamic similarity with insects on earth is achieved by preserving the relevant dimensionless parameters while scaling up the wings three to four times its normal size. The analysis is performed using a well-validated 2D Navier-Stokes equation solver, coupled to a 3D flight dynamics model to simulate free flight. The majority of power required is due to the inertia of the wing because of the ultra-low density. The inertial flap power can be substantially reduced through the use of a torsional spring. The minimum total power consumption is 188 W kg-1 when the torsional spring is driven at its natural frequency.
| S-EPMC8742909 | biostudies-literature
Project description:Dragonflies perform dramatic aerial manoeuvres when chasing targets but glide for periods during cruising flights. This makes dragonflies a great system to explore the role of passive stabilizing mechanisms that do not compromise manoeuvrability. We challenged dragonflies by dropping them from selected inverted attitudes and collected 6-degrees-of-freedom aerial recovery kinematics via custom motion capture techniques. From these kinematic data, we performed rigid-body inverse dynamics to reconstruct the forces and torques involved in righting behaviour. We found that inverted dragonflies typically recover themselves with the shortest rotation from the initial body inclination. Additionally, they exhibited a strong tendency to pitch-up with their head leading out of the manoeuvre, despite the lower moment of inertia in the roll axis. Surprisingly, anaesthetized dragonflies could also complete aerial righting reliably. Such passive righting disappeared in recently dead dragonflies but could be partially recovered by waxing their wings to the anaesthetised posture. Our kinematics data, inverse dynamics model and wind-tunnel experiments suggest that the dragonfly's long abdomen and wing posture generate a rotational tendency and passive attitude recovery mechanism during falling. This work demonstrates an aerodynamically stable body configuration in a flying insect and raises new questions in sensorimotor control for small flying systems.
| S-EPMC7893233 | biostudies-literature
Project description:This work aims to develop an integrated conceptual design process to assess the scalability and performance of propulsion systems of resonant motor-driven flapping wing vehicles. The developed process allows designers to explore the interaction between electrical, mechanical and aerodynamic domains in a single transparent design environment. Wings are modelled based on a quasi-steady treatment that evaluates aerodynamics from geometry and kinematic information. System mechanics is modelled as a damped second-order dynamic system operating at resonance with nonlinear aerodynamic damping. Motors are modelled using standard equations that relate operational parameters and AC voltage input. Design scaling laws are developed using available data based on current levels of technology. The design method provides insights into the effects of changing core design variables such as the actuator size, actuator mass fraction and pitching kinematics on the overall design solution. It is shown that system efficiency achieves peak values of 30-36% at motor masses of 0.5-1 g when a constant angle of attack kinematics is employed. While sinusoidal angle of attack kinematics demands more aerodynamic and electric powers compared with the constant angle of attack case, sinusoidal angle of attack kinematics can lead to a maximum difference of around 15% in peak system efficiency.
| S-EPMC8456139 | biostudies-literature
Project description:Natural and artificial flapping wing flyers generally do not exhibit chaos or aperiodic dynamic modes, though several experimental and numerical studies with canonical models of flapping foils have reported inevitable chaotic transition at high ranges of dynamic plunge velocity ( κh ). Here we considered the idealized case of a pitching-plunging flapping foil and numerically investigated the effects of passive pitching dynamics on the fluid forces and dynamical states, and compared it with a fully actuated wing. We found that in comparison to fully actuated foils, aperiodic transition can be avoided even for high κh when passive oscillations are allowed. Passive pitching modulated the relative foil orientation with respect to the incoming free stream to maintain a lower effective angle-of-attack throughout the stroke and reduced the leading-edge-vortex (LEV) strength. Absence of aperiodic triggers such as flow separation and strong LEVs keep the wake periodic, and chaotic transition is averted. In the presence of fluctuating inflow conditions, passive pitching attenuated the fluid loads experienced by the airfoil thus improving the wing's gust mitigating potential. These findings highlight the favorable properties of passive dynamics in regularizing aerodynamic loads on flapping wing systems and presents viable solutions for artificial flying platforms.
| S-EPMC10069617 | biostudies-literature
Project description:Insects are a prime source of inspiration towards the development of small-scale, engineered, flapping wing flight systems. To help interpret the possible energy transformation strategies observed in Diptera as inspiration for mechanical flapping flight systems, we revisit the perspective of the dipteran wing motor as a bistable click mechanism and take a new, and more flexible, outlook to the architectural composition previously considered. Using a representative structural model alongside biological insights and cues from nonlinear dynamics, our analyses and experimental results reveal that a flight mechanism able to adjust motor axial support stiffness and compression characteristics may dramatically modulate the amplitude range and type of wing stroke dynamics achievable. This corresponds to significantly more versatile aerodynamic force generation without otherwise changing flapping frequency or driving force amplitude. Whether monostable or bistable, the axial stiffness is key to enhance compressed motor load bearing ability and aerodynamic efficiency, particularly compared with uncompressed linear motors. These findings provide new foundation to guide future development of bioinspired, flapping wing mechanisms for micro air vehicle applications, and may be used to provide insight to the dipteran muscle-to-wing interface.
| S-EPMC4345505 | biostudies-literature
Project description:The aerial performance of flying insects ultimately depends on how flapping wings interact with the surrounding air. It has previously been suggested that the wing's three-dimensional camber and corrugation help to stiffen the wing against aerodynamic and inertial loading during flapping motion. Their contribution to aerodynamic force production, however, is under debate. Here, we investigated the potential benefit of three-dimensional wing shape in three different-sized species of flies using models of micro-computed tomography-scanned natural wings and models in which we removed either the wing's camber, corrugation, or both properties. Forces and aerodynamic power requirements during root flapping were derived from three-dimensional computational fluid dynamics modelling. Our data show that three-dimensional camber has no benefit for lift production and attenuates Rankine-Froude flight efficiency by up to approximately 12% compared to a flat wing. Moreover, we did not find evidence for lift-enhancing trapped vortices in corrugation valleys at Reynolds numbers between 137 and 1623. We found, however, that in all tested insect species, aerodynamic pressure distribution during flapping is closely aligned to the wing's venation pattern. Altogether, our study strongly supports the assumption that the wing's three-dimensional structure provides mechanical support against external forces rather than improving lift or saving energetic costs associated with active wing flapping.
| S-EPMC7115228 | biostudies-literature