Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Laser modified ZnO/CdSSe core-shell nanowire arrays for Micro-Steganography and improved photoconduction.

ABSTRACT: Arrays of ZnO/CdSSe core/shell nanowires with shells of tunable band gaps represent a class of interesting hybrid nanomaterials with unique optical and photoelectrical properties due to their type II heterojunctions and chemical compositions. In this work, we demonstrate that direct focused laser beam irradiation is able to achieve localized modification of the hybrid structure and chemical composition of the nanowire arrays. As a result, the photoresponsivity of the laser modified hybrid is improved by a factor of ~3. A 3D photodetector with improved performance is demonstrated using laser modified nanowire arrays overlaid with monolayer graphene as the top electrode. Finally, by controlling the power of the scanning focused laser beam, micropatterns with different fluorescence emissions are created on a substrate covered with nanowire arrays. Such a pattern is not apparent when imaged under normal optical microscopy but the pattern becomes readily revealed under fluorescence microscopy i.e. a form of Micro-Steganography is achieved.

SUBMITTER: Lu J

PROVIDER: S-EPMC4161969 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Core-shell nanowire arrays based on ZnO and Cu<sub>x</sub>O for water stable photocatalysts.

Project description:Staggered gap radial heterojunctions based on ZnO-CuxO core-shell nanowires are used as water stable photocatalysts to harvest solar energy for pollutants removal. ZnO nanowires with a wurtzite crystalline structure and a band gap of approximately 3.3 eV are obtained by thermal oxidation in air. These are covered with an amorphous CuxO layer having a band gap of 1.74 eV and subsequently form core-shell heterojunctions. The electrical characterization of the ZnO pristine and ZnO-CuxO core-shell nanowires emphasizes the charge transfer phenomena at the junction and at the interface between the nanowires and water based solutions. The methylene blue degradation mechanism is discussed taking into consideration the dissolution of ZnO in water based solutions for ZnO nanowires and ZnO-CuxO core-shell nanowires with different shell thicknesses. An optimum thickness of the CuxO layer is used to obtain water stable photocatalysts, where the ZnO-CuxO radial heterojunction enhances the separation and transport of the photogenerated charge carriers when irradiating with UV-light, leading to swift pollutant degradation.

| S-EPMC6872873 | biostudies-literature

Gold-Sensitized Silicon/ZnO Core/Shell Nanowire Array for Solar Water Splitting.

Project description:Solar water splitting represents one of the most promising strategies in the quest for clean and renewable energy. However, low conversion efficiency, use of sacrificial agents, and external bias for current water splitting system limit its practical application. Here, a gold-sensitized Si/ZnOcore/shell nanowire photoelectrochemical (PEC) cell is reported for efficient solar water oxidation. We demonstrated gold-sensitized n-Si/n-ZnO nanowire arrays exhibited higher energy conversion efficiency than gold-sensitized p-Si/n-ZnO nanowire arrays due to the favorable energy-band alignment characteristics. Without any assistance from an external electrical source and sacrificial reagents, gold-sensitized n-Si/n-ZnO core/shell nanowire array photoanode achieved unbiased water splitting under simulated solar light illumination. This method opens a promising venue to cost-efficient production of solar fuels.

| S-EPMC6456691 | biostudies-literature

Developing Seedless Growth of ZnO Micro/Nanowire Arrays towards ZnO/FeS2/CuI P-I-N Photodiode Application.

Project description:A seedless hydrothermal method is developed to grow high density and vertically aligned ZnO micro/nanowire arrays with low defect density on metal films under the saturated nutrition solution. In particular, the mechanism of seedless method is discussed here. A buffer layer can be confirmed by transmission electron microscopy (TEM), which may release the elastic strain between ZnO and substrate to achieve this highly mismatched heteroepitaxial structures. Based on ZnO micro/nanowire arrays with excellent wettability surface, we prepared ZnO-FeS2-CuI p-i-n photodiode by all-solution processed method with the high rectifying ratio of 197 at ± 1 V. Under AM 1.5 condition, the Jsc of 0.5 mA/cm(2), on-off current ratio of 371 and fast photoresponse at zero bias voltage were obtained. This good performance comes from excellent collection ability of photogenerated electrons and holes due to the increased depletion layer width for p-i-n structure. Finally, the high responsivity around 900 nm shows the potential as near infrared photodetectors applications.

| S-EPMC4468464 | biostudies-literature

High-Performance Core/Shell of ZnO/TiO2 Nanowire with AgCl-Doped CdSe Quantum Dots Arrays as Electron Transport Layer for Perovskite Solar Cells.

Project description:Most previous studies of perovskite core/shell structures have been based on ZnO/TiO2 nanowires (NWs), which are not suitable for high photoelectric conversion efficiency. Here, core/shell ZnO/TiO2 NWs with AgCl-doped CdSe quantum dots were fabricated as an electron transport layer (ETL) for perovskite solar cells, based on ZnO/TiO2 arrays. We designed CdSe with AgCl dopants that were synthesized by a colloidal process. An improvement of the recombination barrier (Rct1), due to shell supplementation with AgCl-doped CdSe quantum dots, improved the open circuit voltage, the fill factor, and the adsorption capacity of CH3NH3PbI3 perovskite with NWs. The enhanced cell steady state was attributable to TiO2 with AgCl-doped CdSe QD supplementation. A maximum power conversion efficiency of 15.12% was attained in an atmospheric environment. The mechanism of the recombination and electron transport in the perovskite solar cells becoming the basis of ZnO/TiO2 core/shell arrays was investigated to represent the merit of ZnO/TiO2 core/shell arrays as an electron transport layer in effective devices. These results showed an uncomplicated approach for restraining non-radiative recombination loss in hetero-structure core/shell arrays to significantly improve perovskite solar cell performance and increase the effectiveness of photovoltaics.

| S-EPMC7504724 | biostudies-literature

Fabrication of Hierarchical ZnO@NiO Core-Shell Heterostructures for Improved Photocatalytic Performance.

Project description:ZnO@NiO core-shell heterostructures with high photocatalytic efficiency and reusability were prepared via electrochemical deposition on carbon fiber cloth substrates. Their photocatalytic properties were investigated by measuring the degradation of rhodamine B and methyl orange (MO) under ultraviolet light irradiation. The photodegradation efficiency of the ZnO@NiO heterostructures toward both dyes was better than those of the pure ZnO nanorods and NiO nanosheets. The higher performance could be attributed to the formation of p-n heterojunction between ZnO and NiO. Especially, the ZnO@NiO heterostructure formed upon deposition of NiO for 10 min degraded 95% of MO under ultraviolet light irradiation for 180 min. The high photodegradation efficiency of the ZnO@NiO heterostructures was also attributed to the high separation efficiency of photogenerated carriers, as confirmed by the higher photocurrent of the ZnO@NiO heterostructures (eightfold) when compared with that of the pure ZnO nanorods. Moreover, the high photodegradation efficiency of the ZnO@NiO heterostructures was maintained over three successive degradation experiments and decreased to 90% after the third cycle.

| S-EPMC6117222 | biostudies-literature

Optimizing Photovoltaic Charge Generation of Hybrid Heterojunction Core-Shell Silicon Nanowire Arrays: An FDTD Analysis.

Project description:Development of highly efficient nanowire-based photovoltaic devices requires an accurate modeling of light scattering from interfaces and optical carrier generation inside the cell. A comprehensive study of optical absorption and carrier generation enables us to tap the full potential of nanowire arrays (NWAs). In this study, we have done a systematic study to optimize the core-shell structure of vertically aligned silicon nanowire (Si NW) arrays coated with PTB7:PC71BM by means of finite difference time domain optical simulations to maximize the photon absorption. Initially, the core thickness of hybrid Si NWs has been optimized for the most efficient light absorption. The further improvement of light absorption has been studied by varying the coating thickness of low-band gap organic polymer PTB7:PC71BM on Si NWAs. A delineative analysis shows that NWs with a 150 nm thick silicon core and 60 nm thick coating of PTB7:PC71BM exhibit broad band absorption and the optimum ideal current density of about 34.95 mA/cm2, which are larger than those of their planar counterpart with the same amount of absorbing material and also better than those previously reported for NWs. The basic principle and the physical process taking place during absorption and current generation have been also discussed. The optimization of the hybrid heterojunction Si NW arrays and understanding of their optical characteristics may contribute to the development of economical and highly efficient hybrid solar cells.

| S-EPMC6641530 | biostudies-literature

Freestanding Three-Dimensional CuO/NiO Core-Shell Nanowire Arrays as High-Performance Lithium-Ion Battery Anode.

Project description:We demonstrate significant improvement of CuO nanowire arrays as anode materials for lithium ion batteries by coating with thin NiO nanosheets conformally. The NiO nanosheets were designed two kinds of morphologies, which are porous and non-porous. By the NiO nanosheets coating, the major active CuO nanowires were protected from direct contact with the electrolyte to improve the surface chemical stability. Simultaneously, through the observation and comparison of TEM results of crystalline non-porous NiO nanosheets, before and after lithiation process, we clearly prove the effect of expected protection of CuO, and clarify the differences of phase transition, crystallinity change, ionic conduction and the mechanisms of the capacity decay further. Subsequently, the electrochemical performances exhibit lithiation and delithiation differences of the porous and non-porous NiO nanosheets, and confirm that the presence of the non-porous NiO coating can still effectively assist the diffusion of Li+ ions into the CuO nanowires, maintaining the advantage of high surface area, and improves the cycle performance of CuO nanowires, leading to enhanced battery capacity. Optimally, the best structure is validated to be non-porous NiO nanosheets, in contrary to the anticipated porous NiO nanosheets. In addition, considering the low cost and facile fabrication process can be realized further for practical applications.

| S-EPMC6303307 | biostudies-literature

Enhanced cycling stability of NiCo2S4@NiO core-shell nanowire arrays for all-solid-state asymmetric supercapacitors.

Project description:As a new class of pseudocapacitive material, metal sulfides possess high electrochemical performance. However, their cycling performance as conventional electrodes is rather poor for practical applications. In this article, we report an original composite electrode based on NiCo2S4@NiO core-shell nanowire arrays (NWAs) with enhanced cycling stability. This three-dimensional electrode also has a high specific capacitance of 12.2 F cm-2 at the current density of 1 mA cm-2 and excellent cycling stability (about 89% retention after 10,000 cycles). Moreover, an all-solid-state asymmetric supercapacitor (ASC) device has been assembled with NiCo2S4@NiO NWAs as the positive electrode and active carbon (AC) as the negative electrode, delivering a high energy density of 30.38?W h kg-1 at 0.288?KW kg-1 and good cycling stability (about 109% retention after 5000 cycles). The results show that NiCo2S4@NiO NWAs are promising for high-performance supercapacitors with stable cycling based on the unique core-shell structure and well-designed combinations.

| S-EPMC5141571 | biostudies-literature

Piezo-Phototronic Effect Enhanced Flexible Solar Cells Based on n-ZnO/p-SnS Core-Shell Nanowire Array.

Project description:The piezo-phototronic effect is about the enhanced separation, transport, and recombination of the photogenerated carriers using the piezoelectric polarization charges present in piezoelectric-semiconductor materials. Here, it is presented that the piezo-phototronic effect can be effectively applied to improve the relative conversion efficiency of a flexible solar cell based on n-ZnO/p-SnS core-shell nanowire array for 37.3% under a moderate vertical pressure. The performance of the solar cell can be effectively enhanced by a gentle bending of the device, showing its potential for application in curly geometries. This study not only adds further understanding about the concept of increasing solar energy conversion efficiency via piezo-phototronic effect, but also demonstrates the great potential of piezo-phototronic effect in the application of large-scale, flexible, and lightweight nanowire array solar cells.

| S-EPMC5238743 | biostudies-literature

Radial heterojunction based on single ZnO-Cu<sub>x</sub>O core-shell nanowire for photodetector applications.

Project description:ZnO-CuxO core-shell radial heterojunction nanowire arrays were fabricated by a straightforward approach which combine two simple, cost effective and large-scale preparation methods: (i) thermal oxidation in air of a zinc foil for obtaining ZnO nanowire arrays and (ii) radio frequency magnetron sputtering for covering the surface of the ZnO nanowires with a CuxO thin film. The structural, compositional, morphological and optical properties of the high aspect ratio ZnO-CuxO core-shell nanowire arrays were investigated. Individual ZnO-CuxO core-shell nanowires were contacted with Pt electrodes by means of electron beam lithography technique, diode behaviour being demonstrated. Further it was found that these n-p radial heterojunction diodes based on single ZnO-CuxO nanowires exhibit a change in the current under UV light illumination and therefore behaving as photodetectors.

| S-EPMC6447533 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data