Dataset Information

Towards highly accelerated Cartesian time-resolved 3D flow cardiovascular magnetic resonance in the clinical setting.

ABSTRACT:

Background

The clinical applicability of time-resolved 3D flow cardiovascular magnetic resonance (CMR) remains compromised by the long scan times associated with phase-contrast imaging. The present work demonstrates the applicability of 8-fold acceleration of Cartesian time-resolved 3D flow CMR in 10 volunteers and in 9 patients with different congenital heart diseases (CHD). It is demonstrated that accelerated 3D flow CMR data acquisition and image reconstruction using k-t PCA (principal component analysis) can be implemented into clinical workflow and results are sufficiently accurate relative to conventional 2D flow CMR to permit for comprehensive flow quantification in CHD patients.

Methods

The fidelity of k-t PCA was first investigated on retrospectively undersampled data for different acceleration factors and compared to k-t SENSE and fully sampled reference data. Subsequently, k-t PCA with 8-fold nominal undersampling was applied on 10 healthy volunteers and 9 CHD patients on a clinical 1.5 T MR scanner. Quantitative flow validation was performed in vessels of interest on the 3D flow datasets and compared to 2D through-plane flow acquisitions. Particle trace analysis was used to qualitatively visualise flow patterns in patients.

Results

Accelerated time-resolved 3D flow data were successfully acquired in all subjects with 8-fold nominal scan acceleration. Nominal scan times excluding navigator efficiency were on the order of 6 min and 7 min in patients and volunteers. Mean differences in stroke volume in selected vessels of interest were 2.5 ± 8.4 ml and 1.63 ± 4.8 ml in volunteers and patients, respectively. Qualitative flow pattern analysis in the time-resolved 3D dataset revealed valuable insights into hemodynamics including circular and helical patterns as well as flow distributions and origin in the Fontan circulation.

Conclusion

Highly accelerated time-resolved 3D flow using k-t PCA is readily applicable in clinical routine protocols of CHD patients. Nominal scan times of 6 min are well tolerated and allow for quantitative and qualitative flow assessment in all great vessels.

SUBMITTER: Giese D

PROVIDER: S-EPMC4230248 | biostudies-literature | 2014 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Towards highly accelerated Cartesian time-resolved 3D flow cardiovascular magnetic resonance in the clinical setting.

Giese Daniel D Wong James J Greil Gerald F GF Buehrer Martin M Schaeffter Tobias T Kozerke Sebastian S

Journal of cardiovascular magnetic resonance : official journal of the Society for Cardiovascular Magnetic Resonance 20140618

<h4>Background</h4>The clinical applicability of time-resolved 3D flow cardiovascular magnetic resonance (CMR) remains compromised by the long scan times associated with phase-contrast imaging. The present work demonstrates the applicability of 8-fold acceleration of Cartesian time-resolved 3D flow CMR in 10 volunteers and in 9 patients with different congenital heart diseases (CHD). It is demonstrated that accelerated 3D flow CMR data acquisition and image reconstruction using k-t PCA (principa ...[more]

PMID: 24942253

Similar Datasets

Project description:BACKGROUND:4D flow cardiovascular magnetic resonance (CMR) enables visualization of complex blood flow and quantification of biomarkers for vessel wall disease, such as wall shear stress (WSS). Because of the inherently long acquisition times, many efforts have been made to accelerate 4D flow acquisitions, however, no detailed analysis has been made on the effect of Cartesian compressed sensing accelerated 4D flow CMR at different undersampling rates on quantitative flow parameters and WSS. METHODS:We implemented a retrospectively triggered 4D flow CMR acquisition with pseudo-spiral Cartesian k-space filling, which results in incoherent undersampling of k-t space. Additionally, this strategy leads to small jumps in k-space thereby minimizing eddy current related artifacts. The pseudo-spirals were rotated in a tiny golden-angle fashion, which provides optimal incoherence and a variable density sampling pattern with a fully sampled center. We evaluated this 4D flow protocol in a carotid flow phantom with accelerations of R = 2-20, as well as in carotids of 7 healthy subjects (27 ± 2 years, 4 male) for R = 10-30. Fully sampled 2D flow CMR served as a flow reference. Arteries were manually segmented and registered to enable voxel-wise comparisons of both velocity and WSS using a Bland-Altman analysis. RESULTS:Magnitude images, velocity images, and pathline reconstructions from phantom and in vivo scans were similar for all accelerations. For the phantom data, mean differences at peak systole for the entire vessel volume in comparison to R = 2 ranged from - 2.3 to - 5.3% (WSS) and - 2.4 to - 2.2% (velocity) for acceleration factors R = 4-20. For the in vivo data, mean differences for the entire vessel volume at peak systole in comparison to R = 10 were - 9.9, - 13.4, and - 16.9% (WSS) and - 8.4, - 10.8, and - 14.0% (velocity), for R = 20, 25, and 30, respectively. Compared to single slice 2D flow CMR acquisitions, peak systolic flow rates of the phantom showed no differences, whereas peak systolic flow rates in the carotid artery in vivo became increasingly underestimated with increasing acceleration. CONCLUSION:Acquisition of 4D flow CMR of the carotid arteries can be highly accelerated by pseudo-spiral k-space sampling and compressed sensing reconstruction, with consistent data quality facilitating velocity pathline reconstructions, as well as quantitative flow rate and WSS estimations. At an acceleration factor of R = 20 the underestimation of peak velocity and peak WSS was acceptable (< 10%) in comparison to an R = 10 accelerated 4D flow CMR reference scan. Peak flow rates were underestimated in comparison with 2D flow CMR and decreased systematically with higher acceleration factors.

Project description:PURPOSE:To develop a robust and efficient reconstruction framework that provides high-quality motion-compensated respiratory-resolved images from free-breathing 3D whole-heart Cartesian coronary magnetic resonance angiography (CMRA) acquisitions. METHODS:Recently, XD-GRASP (eXtra-Dimensional Golden-angle RAdial Sparse Parallel MRI) was proposed to achieve 100% scan efficiency and provide respiratory-resolved 3D radial CMRA images by exploiting sparsity in the respiratory dimension. Here, a reconstruction framework for Cartesian CMRA imaging is proposed, which provides respiratory-resolved motion-compensated images by incorporating 2D beat-to-beat translational motion information to increase sparsity in the respiratory dimension. The motion information is extracted from interleaved image navigators and is also used to compensate for 2D translational motion within each respiratory phase. The proposed Optimized Respiratory-resolved Cartesian Coronary MR Angiography (XD-ORCCA) method was tested on 10 healthy subjects and 2 patients with cardiovascular disease, and compared against XD-GRASP. RESULTS:The proposed XD-ORCCA provides high-quality respiratory-resolved images, allowing clear visualization of the right and left coronary arteries, even for irregular breathing patterns. Compared with XD-GRASP, the proposed method improves the visibility and sharpness of both coronaries. Significant differences (p?<?.05) in visible vessel length and proximal vessel sharpness were found between the 2 methods. The XD-GRASP method provides good-quality images in the absence of intraphase motion. However, motion blurring is observed in XD-GRASP images for respiratory phases with larger motion amplitudes and subjects with irregular breathing patterns. CONCLUSION:A robust respiratory-resolved motion-compensated framework for Cartesian CMRA has been proposed and tested in healthy subjects and patients. The proposed XD-ORCCA provides high-quality images for all respiratory phases, independently of the regularity of the breathing pattern.

Project description:BackgroundThe application of cardiovascular magnetic resonance angiography (CMRA) for the assessment of thoracic aortic disease is often associated with prolonged and unpredictable acquisition times and residual motion artefacts. To overcome these limitations, we have integrated undersampled acquisition with image-based navigators and inline non-rigid motion correction to enable a free-breathing, contrast-free Cartesian CMRA framework for the visualization of the thoracic aorta in a short and predictable scan of 3 min.Methods35 patients with thoracic aortic disease (36 ± 13y, 14 female) were prospectively enrolled in this single-center study. The proposed 3D T2-prepared balanced steady state free precession (bSSFP) sequence with image-based navigator (iNAV) was compared to the clinical 3D T2-prepared bSSFP with diaphragmatic-navigator gating (dNAV), in terms of image acquisition time. Three cardiologists blinded to iNAV vs. dNAV acquisition, recorded image quality scores across four aortic segments and their overall diagnostic confidence. Contrast ratio (CR) and relative standard deviation (RSD) of signal intensity (SI) in the corresponding segments were estimated. Co-axial aortic dimensions in six landmarks were measured by two readers to evaluate the agreement between the two methods, along with inter-observer and intra-observer agreement. Kolmogorov-Smirnov test, Mann-Whitney U (MWU), Bland-Altman analysis (BAA), intraclass correlation coefficient (ICC) were used for statistical analysis.ResultsThe scan time for the iNAV-based approach was significantly shorter (3.1 ± 0.5 min vs. 12.0 ± 3.0 min for dNAV, P = 0.005). Reconstruction was performed inline in 3.0 ± 0.3 min. Diagnostic confidence was similar for the proposed iNAV versus dNAV for all three reviewers (Reviewer 1: 3.9 ± 0.3 vs. 3.8 ± 0.4, P = 0.7; Reviewer 2: 4.0 ± 0.2 vs. 3.9 ± 0.3, P = 0.4; Reviewer 3: 3.8 ± 0.4 vs. 3.7 ± 0.6, P = 0.3). The proposed method yielded higher image quality scores in terms of artefacts from respiratory motion, and non-diagnostic images due to signal inhomogeneity were observed less frequently. While the dNAV approach outperformed the iNAV method in the CR assessment, the iNAV sequence showed improved signal homogeneity along the entire thoracic aorta [RSD SI 5.1 (4.4, 6.5) vs. 6.5 (4.6, 8.6), P = 0.002]. BAA showed a mean difference of < 0.05 cm across the 6 landmarks between the two datasets. ICC showed excellent inter- and intra-observer reproducibility.ConclusionsThoracic aortic iNAV-based CMRA with fast acquisition (~ 3 min) and inline reconstruction (3 min) is proposed, resulting in high diagnostic confidence and reproducible aortic measurements.

Project description:BackgroundEndogenous contrast T1? cardiovascular magnetic resonance (CMR) can detect scar or infiltrative fibrosis in patients with ischemic or non-ischemic cardiomyopathy. Existing 2D T1? techniques have limited spatial coverage or require multiple breath-holds. The purpose of this project was to develop an accelerated, free-breathing 3D T1? mapping sequence with whole left ventricle coverage using a multicoil, compressed sensing (CS) reconstruction technique for rapid reconstruction of undersampled k-space data.MethodsWe developed a cardiac- and respiratory-gated, free-breathing 3D T1? sequence and acquired data using a variable-density k-space sampling pattern (A?=?3). The effect of the transient magnetization trajectory, incomplete recovery of magnetization between T1?-preparations (heart rate dependence), and k-space sampling pattern on T1? relaxation time error and edge blurring was analyzed using Bloch simulations for normal and chronically infarcted myocardium. Sequence accuracy and repeatability was evaluated using MnCl2 phantoms with different T1? relaxation times and compared to 2D measurements. We further assessed accuracy and repeatability in healthy subjects and compared these results to 2D breath-held measurements.ResultsThe error in T1? due to incomplete recovery of magnetization between T1?-preparations was T1?healthy =?6.1% and T1?infarct =?10.8% at 60?bpm and T1?healthy =?13.2% and T1?infarct =?19.6% at 90?bpm. At a heart rate of 60?bpm, error from the combined effects of readout-dependent magnetization transients, k-space undersampling and reordering was T1?healthy =?12.6% and T1?infarct =?5.8%. CS reconstructions had improved edge sharpness (blur metric?=?0.15) compared to inverse Fourier transform reconstructions (blur metric?=?0.48). There was strong agreement between the mean T1? estimated from the 2D and accelerated 3D data (R2 =?0.99; P <?0.05) acquired on the MnCl2 phantoms. The mean R1? estimated from the accelerated 3D sequence was highly correlated with MnCl2 concentration (R2 =?0.99; P?<?0.05). 3D T1? acquisitions were successful in all human subjects. There was no significant bias between undersampled 3D T1? and breath-held 2D T1? (mean bias?=?0.87) and the measurements had good repeatability (COV2D =?6.4% and COV3D =?7.1%).ConclusionsThis is the first report of an accelerated, free-breathing 3D T1? mapping of the left ventricle. This technique may improve non-contrast myocardial tissue characterization in patients with heart disease in a scan time appropriate for patients.

Project description:BACKGROUND:Three-dimensional time-resolved phase-contrast cardiovascular magnetic resonance (4D flow CMR) enables the quantification and visualisation of blood flow, but its clinical applicability remains hampered by its long scan time. The aim of this study was to evaluate the use of compressed sensing (CS) with on-line reconstruction to accelerate the acquisition and reconstruction of 4D flow CMR of the thoracic aorta. METHODS:4D flow CMR of the thoracic aorta was acquired in 20 healthy subjects using CS with acceleration factors ranging from 4 to 10. As a reference, conventional parallel imaging (SENSE) with acceleration factor 2 was used. Flow curves, net flows, peak flows and peak velocities were extracted from six contours along the aorta. To measure internal data consistency, a quantitative particle trace analysis was performed. Additionally, scan-rescan, inter- and intraobserver reproducibility were assessed. Subsequently, 4D flow CMR with CS factor 6 was acquired in 3 patients with differing aortopathies. The flow patterns resulting from particle trace visualisation were qualitatively analysed. RESULTS:All collected data were successfully acquired and reconstructed on-line. The average acquisition time including respiratory navigator efficiency with CS factor 6 was 5:02?±?2:23?min while reconstruction took approximately 9?min. For CS factors of 8 or less, mean differences in net flow, peak flow and peak velocity as compared to SENSE were below 2.2?±?7.8?ml/cycle, 4.6?±?25.2?ml/s and?-?7.9?±?13.0?cm/s, respectively. For a CS factor of 10 differences reached 5.4?±?8.0?ml/cycle, 14.4?±?28.3?ml/s and?-?4.0?±?12.2?cm/s. Scan-rescan analysis yielded mean differences in net flow of -?0.7?±?4.9?ml/cycle for SENSE and?-?0.2?±?8.5?ml/cycle for CS factor of 6. CONCLUSIONS:A six- to eightfold acceleration of 4D flow CMR using CS is feasible. Up to a CS acceleration rate of 6, no statistically significant differences in measured flow parameters could be observed with respect to the reference technique. Acquisitions in patients with aortopathies confirm the potential to integrate the proposed method in a clinical routine setting, whereby its main benefits are scan-time savings and direct on-line reconstruction.

Project description:PurposeCurrent cardiovascular magnetic resonance (CMR) examinations require expert planning, multiple breath holds, and 2D imaging. To address this, we sought to develop and validate a comprehensive free-breathing 3D cine function and flow CMR examination using a steady-state free precession (SSFP) sequence to depict anatomy fused with a spatially registered phase contrast (PC) sequence for blood flow analysis.MethodsIn a prospective study, 25 patients underwent a CMR examination which included a 3D cine SSFP sequence and a 3D cine PC (also known as 4D flow) sequence acquired during free-breathing and after the administration of a gadolinium-based contrast agent. Both 3D sequences covered the heart and mediastinum, and used retrospective vectorcardiogram gating (20 phases/beat interpolated to 30 phases/beat) and prospective respiratory motion compensation confining data acquisition to end-expiration. Cardiovascular measurements derived from the 3D cine SSFP and PC images were then compared with those from standard 2D imaging.ResultsAll 3D cine SSFP and PC acquisitions were completed successfully. The mean time for the 3D cine sequences including prescription was shorter than that for the corresponding 2D sequences (21 min vs. 36 min, P-value <0.001). Left and right ventricular end-diastolic volumes and stroke volumes by 3D cine SSFP were slightly smaller than those from 2D cine SSFP (all biases ≤5%). The blood flow measurements from the 3D and 2D sequences had close agreement in the ascending aorta (bias -2.6%) but main pulmonary artery flow was lower with the 3D cine sequence (bias -11.2%).ConclusionCompared to the conventional 2D cine approach, a comprehensive 3D cine function and flow examination was faster and yielded slightly lower left and right end-diastolic volumes, stroke volumes, and main pulmonary artery blood flow. This free-breathing 3D cine approach allows flexible post-examination data analysis and has the potential to make examinations more comfortable for patients and easier to perform for the operator.

Dataset Information

Towards highly accelerated Cartesian time-resolved 3D flow cardiovascular magnetic resonance in the clinical setting.

Background

Methods

Results

Conclusion

Publications

Towards highly accelerated Cartesian time-resolved 3D flow cardiovascular magnetic resonance in the clinical setting.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure