Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A solid-phase extraction method for rapidly determining the adsorption coefficient of pharmaceuticals in sewage sludge.

ABSTRACT: The partitioning of pharmaceuticals in the environment can be assessed by measuring their adsorption coefficients (Kd) between aqueous and solid phases. Measuring this coefficient in sewage sludge gives an indication of their partitioning behaviour in a wastewater treatment plant and hence contributes to an understanding of their subsequent fate. The regulatory approved method for measuring Kd in sewage sludge is the US Environmental Protection Agency's Office of Prevention, Pesticides and Toxic Substances (OPPTS) guideline 835.1110, which is labour intensive and time consuming. We describe an alternative method for measuring the Kd of pharmaceuticals in sewage sludge using a modified solid-phase extraction (SPE) technique. SPE cartridges were packed at different sludge/PTFE ratios (0.4, 6.0, 24.0 and 40.0% w/w sludge) and eluted with phosphate buffer at pH 7.4. The approach was tested initially using three pharmaceuticals (clofibric acid, diclofenac and oxytetracycline) that covered a range of Kd values. Subsequently, the sorption behaviour of ten further pharmaceuticals with varying physico-chemical properties was evaluated. Results from the SPE method were comparable to those of the OPPTS test, with a correlation coefficient of 0.93 between the two approaches. SPE cartridges packed with sludge and PTFE were stable for up to one year; use within one month reduced variability in measurements (to a maximum of 0.6 log units). The SPE method is low-cost, easy to use and enables the rapid measurement of Kd values for a large number of chemicals. It can be used as an alternative to the more laborious full OPPTS test in environmental fate studies and risk assessments.

SUBMITTER: Berthod L

PROVIDER: S-EPMC4234481 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Pharmaceuticals and Their Main Metabolites in Treated Sewage Sludge and Sludge-Amended Soil: Availability and Sorption Behaviour.

Project description:This work evaluated the availability and sorption behaviour of four pharmaceuticals and eight of their metabolites in sewage sludge and sludge-amended soil. Digested sludge and compost were evaluated. The highest levels found in digested sludge corresponded to caffeine (up to 115 ng g-1 dm), ibuprofen (45 ng g-1 dm) and carbamazepine (9.3 ng g-1 dm). The concentrations measured in compost were even lower than in digested sludge. No compound was detected in sludge-amended soils. This fact could be due to the dilution effect after sludge application to soil. Different adsorption capacities in sludge-soil mixtures were measured for the studied compounds at the same spike concentration. In general, except for paraxanthine and 3-hydroxycarbamazepine, the metabolite concentrations measured in the mixtures were almost two-fold lower than those of their parent compounds, which can be explained by their mobility and lixiviation tendency. The log Kd ranged from -1.55 to 1.71 in sludge samples and from -0.29 to 1.18 in soil-sludge mixtures. The log Kd values calculated for compost were higher than those calculated for digested sludge. The obtained results implied that the higher organic carbon content of compost could influence soil contamination when it is applied to soil.

| S-EPMC8513156 | biostudies-literature

Effects of Biochar-Derived Sewage Sludge on Heavy Metal Adsorption and Immobilization in Soils.

Project description:The object of this study was to evaluate the effect of sewage sludge biochar on adsorption and mobility of Cr, Mn, Cu, and Zn. Biochar (BC400) was produced via pyrolysis of municipal sewage sludge at 400 °C. Maximum adsorption capacities (qm) for Zn, Cr, Mn, and Cu were 5.905, 5.724, 5.681, and 5.342 mg·g-1, respectively, in the mono-metal solution and 2.475, 8.204, 1.01, and 5.415 mg·g-1, respectively, in the multi-metal solution. The adsorption capacities for Mn, Cu, and Zn decreased in the multi-metal solution due to competitive adsorption, whereas the capacity for Cr increased. Surface precipitation is an important mechanism in the sorption of these metals on BC400. The 360-day incubation experiment showed that BC400 application reduced metal mobility in contaminated soils, which was attributed to the substantial decreases in the acid-soluble fractions of Cr, Mn, Cu, and Zn (72.20%, 70.38%, 50.43%, and 29.78%, respectively). Furthermore, the leaching experiment using simulated acid rain indicated that the addition of BC400 enhanced the acid buffer capacity of contaminated soil, and the concentration of Cr, Mn, Cu, and Zn in the leachate was lower than in untreated soil. Overall, this study indicates that sewage sludge biochar application reduces the mobility of heavy metal in co-contaminated soil, and this adsorption experiment is suitable for the evaluation of biochar properties for remediation.

| S-EPMC5551119 | biostudies-other

A fast and robust method for the extraction and analysis of quaternary alkyl ammonium compounds from soil and sewage sludge.

Project description:Alkyltrimethylammonium compounds (ATMACs), dialkyldimethylammonium compounds (DADMACs) and benzylalkyldimethylethylammonium compounds (BACs) are quaternary alkylammonium compounds (QAAC), which are released into the environment in large quantities after their use in cleaning agents and disinfectants. Despite their potential role as selective agents promoting resistance against QAACs as well as antibiotics, there is a lack of data for QAACs in soil due to the lack of sensitive analytical methods. Therefore, we present a robust and fast method for the extraction and quantification of concentrations of these compounds in soil and sewage sludge. The method is based on ultrasonic extraction (USE) with a mixture of acetonitrile and HCl followed by a solid phase extraction (SPE) cleaning step and a subsequent quantification of concentrations with high performance liquid chromatography with mass spectrometry (HPLC-MS/MS) in multi mass reaction mode (MRM). The proposed method is suitable for the quantification of ATMACs (chain length C-8 to C-16), BACs (C-8 to C-18) and DADMACs (C-8 to C-16). The achieved limits of quantification (LOQ) range from 0.1 μg kg-1 to 2.1 μg kg-1. The recovery rates of spiked soil samples for non-deuterated homologues were between 47% and 57%. The analysis of sewage sludge samples and soil samples revealed that BAC-C12 was the most abundant QAAC with concentrations up to 38600 μg kg-1 in sewage sludge and up to 81 μg kg-1 in a Mexican soil that was irrigated with wastewater. Overall, the presented methods open perspectives for effectively studying fate and effects of QAACs in soils.

| S-EPMC7402506 | biostudies-literature

Pharmaceuticals and personal care products in archived U.S. biosolids from the 2001 EPA National Sewage Sludge Survey.

Project description:In response to the U.S. National Academies' call for a better assessment of chemical pollutants contained in the approximately 7 million dry tons of digested municipal sludge produced annually in the United States, the mean concentration of 72 pharmaceuticals and personal care products (PPCP) were determined in 110 biosolids samples collected by the U.S. Environmental Protection Agency (EPA) in its 2001 National Sewage Sludge Survey. Composite samples of archived biosolids, collected at 94 U.S. wastewater treatment plants from 32 states and the District of Columbia, were analyzed by liquid chromatography tandem mass spectrometry using EPA Method 1694. Thirty-eight (54%) of the 72 analytes were detected in at least one composite sample at concentrations ranging from 0.002 to 48 mg kg(-1) dry weight. Triclocarban and triclosan were the most abundant analytes with mean concentrations of 36 +/- 8 and 12.6 +/- 3.8 mg kg(-1) (n = 5), respectively, accounting for 65% of the total PPCP mass found. The loading to U.S. soils from nationwide biosolids recycling was estimated at 210-250 metric tons per year for the sum of the 72 PPCPs investigated. The results of this nationwide reconnaissance of PPCPs in archived U.S. biosolids mirror in contaminant occurrences, frequencies and concentrations, those reported by the U.S. EPA for samples collected in 2006/2007. This demonstrates that PPCP releases in U.S. biosolids have been ongoing for many years and the most abundant PPCPs appear to show limited fluctuations in mass over time when assessed on a nationwide basis. The here demonstrated use of five mega composite samples holds promise for conducting cost-effective, routine monitoring on a regional and national basis.

| S-EPMC2827628 | biostudies-literature

Quantitative structure-property relationships for predicting sorption of pharmaceuticals to sewage sludge during waste water treatment processes.

Project description:Understanding the sorption of pharmaceuticals to sewage sludge during waste water treatment processes is important for understanding their environmental fate and in risk assessments. The degree of sorption is defined by the sludge/water partition coefficient (Kd). Experimental Kd values (n=297) for active pharmaceutical ingredients (n=148) in primary and activated sludge were collected from literature. The compounds were classified by their charge at pH7.4 (44 uncharged, 60 positively and 28 negatively charged, and 16 zwitterions). Univariate models relating log Kd to log Kow for each charge class showed weak correlations (maximum R2=0.51 for positively charged) with no overall correlation for the combined dataset (R2=0.04). Weaker correlations were found when relating log Kd to log Dow. Three sets of molecular descriptors (Molecular Operating Environment, VolSurf and ParaSurf) encoding a range of physico-chemical properties were used to derive multivariate models using stepwise regression, partial least squares and Bayesian artificial neural networks (ANN). The best predictive performance was obtained with ANN, with R2=0.62-0.69 for these descriptors using the complete dataset. Use of more complex Vsurf and ParaSurf descriptors showed little improvement over Molecular Operating Environment descriptors. The most influential descriptors in the ANN models, identified by automatic relevance determination, highlighted the importance of hydrophobicity, charge and molecular shape effects in these sorbate-sorbent interactions. The heterogeneous nature of the different sewage sludges used to measure Kd limited the predictability of sorption from physico-chemical properties of the pharmaceuticals alone. Standardization of test materials for the measurement of Kd would improve comparability of data from different studies, in the long-term leading to better quality environmental risk assessments.

| S-EPMC5206221 | biostudies-literature

Sequential Extraction and Characterization of Nitrogen Compounds after Hydrothermal Liquefaction of Sewage Sludge.

Project description:Organic solid wastes such as sewage sludge are potential feedstocks for the production of drop-in biofuels. Hydrothermal liquefaction (HTL) is a process that converts the wet sewage sludge into an organic biocrude. To fulfill industrial fuel standards, the considerable heteroatom content of the biocrude needs to be lowered by downstream processes. Nitrogen (N) contained in several compounds poses a challenge and yet, the complex chemical composition of HTL-biocrude samples has hindered detailed analysis and understanding. In particular, N-containing aromatic substances appear very persistent in biocrude. In the present work, two alkaline (NaHCO3 and NaOH) and one acidic (HCL) aqueous solutions were subsequently applied to extract and recover polar N-containing compounds from the biocrude matrix with an N-content of 3.8 wt %. Gas chromatography-mass spectrometry, atmospheric pressure chemical ionization in positive mode, and Fourier transform ion cyclotron resonance mass spectrometry were applied for their characterization and results show that a large share of N-compounds with an aromatic, pyridinic structure was found in the acidic extracted fraction with an N-content of 9.5 wt %. Aliphatic N-compounds were less affected by the separation and ended in the residual fraction. N-compounds with multiple oxygen functionalizations are enriched in the alkaline extracted fractions. This showed that N-compounds with an aromatic structure are strongly affected by polar groups and can potentially be extracted by downstream processes with appropriate solvents.

| S-EPMC9720724 | biostudies-literature

Adsorption and desorption of heavy metals by the sewage sludge and biochar-amended soil.

Project description:The goal of the study was to evaluate the application of biochar (BC) to the sewage sludge (SL) on the adsorption and desorption capacity of Cd(II), Cu(II), Ni(II) and Zn(II). The effect of biochar contribution in the sewage sludge (2.5, 5 and 10%) was investigated. The isotherms data were fitted to the Langmiur (LM), Freundlich (FM) and Temkin (TM) models. The best fitting for kinetic study was obtained for the pseudo-second-order equation. The best fitting of the experimental data was observed for the LM in the case of SL and BC, and for the FM in the case of SL- and SL/BC-amended soil. SL was characterized by even four-order higher sorption capacity than BC. The addition of the BC to the SL and next to the soil increased the adsorption capacity of the soil and the SL-amended soil. In the case of all investigated potentially toxic elements (PTEs), the highest adsorption capacity was achieved for SL-amended soil in comparison with the control soil. In the case of other experimental variants, the adsorption capacity of metal ions was as follows: 2.5% BC > 5.0% BC > 10% BC. The negative correlation between hydrated radius of metal ions and the kinetics of sorption was observed. However, the desorption of PTEs from BC/SL-amended soil was significantly lower than for SL-amended soil (except of Cd) and non-amended soil. It can be concluded that the addition of the biochar enhanced the immobilization of PTEs and reduced their bioavailability and mobility in the soil amended by the sewage sludge.

| S-EPMC6751146 | biostudies-literature

Manufacturing of Lightweight Aggregates as an Auspicious Method of Sewage Sludge Utilization.

Project description:Sewage sludge is a high-volume and low-cost waste commonly generated worldwide, so its utilization is a vital issue. The application of this waste in the manufacturing of lightweight aggregates was investigated. The process was performed using intensive mixers with volumes of 5 and 30 L, as well as the industrial 500 L mixer. Then, granulates were sintered in a tube furnace. The influence of composition and mixer size on the particle size, microstructure, mechanical performance, and stability of lightweight aggregates in different environments was analyzed. The best results were obtained for a 500 L mixer, enhancing the industrial potential of the presented process. Increasing the share of sewage sludge in the composition of aggregates enhanced their porosity and reduced the specific weight, which caused a drop in compressive strength. Nevertheless, for all analyzed materials, the mechanical performance was superior compared to many commercial products. Therefore, sewage sludge can be efficiently applied as a raw material for the manufacturing of lightweight aggregates. The presented results confirm that a proper adjustment of composition allows easy the tailoring of aggregates' performance and cost.

| S-EPMC7764059 | biostudies-literature

High-solid Anaerobic Co-digestion of Sewage Sludge and Cattle Manure: The Effects of Volatile Solid Ratio and pH.

Project description:High-solid anaerobic digestion is an attractive solution to the problem of sewage sludge disposal. One method that can be used to enhance the production of volatile fatty acids (VFAs) and the generation of methane from anaerobic digestion involves combining an alkaline pretreatment step with the synergistic effects of sewage sludge and cattle manure co-digestion, which improves the activity of key enzymes and microorganisms in the anaerobic co-digestion system to promote the digestion of organic waste. In this study, we describe an efficient strategy that involves adjusting the volatile solid (VS) ratio (sewage sludge/cattle manure: 3/7) and initial pH (9.0) to improve VFA production and methane generation from the co-digestion of sludge and manure. The experimental results indicate that the maximum VFA production was 98.33?g/kg-TS (total solid) at the optimal conditions. Furthermore, methane generation in a long-term semi-continuously operated reactor (at a VS ratio of 3/7 and pH of 9.0) was greater than 120.0?L/kg-TS.

| S-EPMC5057105 | biostudies-literature

A method to rapidly analyze the simultaneous release of multiple pharmaceuticals from electrospun fibers.

Project description:Electrospun fibers are a commonly used cell scaffold and have also been used as pharmaceutical delivery devices. In this study, we developed a method to analyze the release of multiple pharmaceuticals from a single electrospun fiber scaffold and determine how each pharmaceutical's loading concentration affects the release rate of each pharmaceutical. Our analysis methods were tested on electrospun fibers loaded with two pharmaceuticals: 6-aminonicotinamide (6AN) and ibuprofen. Pharmaceutical concentration in electrospun fibers ranged from 1.5% to 8.5% by weight. We found that 6AN release was dependent on the concentration of 6AN and ibuprofen loaded into the fibers, while ibuprofen release was only dependent on the loading concentration of ibuprofen but not 6AN. Unexpectedly, ibuprofen release became dependent on both 6AN and ibuprofen loading concentrations when fibers were aged for 1-month post-fabrication at room temperature in the laboratory followed by a 4-hour incubation inside the cell culture incubator at 37 °C and 5% CO2. One additional discovery was an unknown signal that was attributed to the medical grade syringes used for electrospinning, which was easily removed using our method. These results demonstrate the utility of the methods developed here and indicate multiple agents can be released concomitantly from electrospun fibers to meet the demands of more complex tissue engineering approaches. Future work will focus on analysis of pharmaceutical release profiles to exploit the dependencies on pharmaceutical loading concentrations.

| S-EPMC7733704 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data