Erratum to: Plasmonic molecules via glass annealing in hydrogen.
Ontology highlight
ABSTRACT:
SUBMITTER: Redkov A
PROVIDER: S-EPMC4411328 | biostudies-literature | 2015
REPOSITORIES: biostudies-literature
Publications
Erratum to: Plasmonic molecules via glass annealing in hydrogen.
Redkov Alexey A Chervinskii Semen S Baklanov Alexander A Reduto Igor I Zhurikhina Valentina V Lipovskii Andrey A
Nanoscale research letters 20150428
[This corrects the article DOI: 10.1186/1556-276X-9-606.]. ...[more]
Similar Datasets
Project description:Integration of thin-film oxide piezoelectrics on glass is imperative for the next generation of transparent electronics to attain sensing and actuating functions. However, their crystallization temperature (above 650 °C) is incompatible with most glasses. We developed a flash lamp process for the growth of piezoelectric lead zirconate titanate films. The process enables crystallization on various types of glasses in a few seconds only. The functional properties of these films are comparable to the films processed with standard rapid thermal annealing at 700 °C. A surface haptic device was fabricated with a 1 μm-thick film (piezoelectric e33,f of -5 C m-2). Its ultrasonic surface deflection reached 1.5 μm at 60 V, sufficient for its use in surface rendering applications. This flash lamp annealing process is compatible with large glass sheets and roll-to-roll processing and has the potential to significantly expand the applications of piezoelectric devices on glass.
| S-EPMC10904753 | biostudies-literature
Project description:The interfacial effect is one of the significant factors in the glass-transition temperature (Tg) of the polymeric thin film system, competing against the free surface effect. Herein, the Tgs of poly (methyl methacrylate) (PMMA) films with different thicknesses and substrates are studied by fluorescence measurements, focusing on the influence of interfacial effects on the Tgs. The strong interaction between PMMA and quartz substrate leads to increased Tgs with the decreased thickness of the film. The plasmonic silver substrate causes enhanced fluorescence intensity near the interface, resulting in the delayed reduction of the Tgs with the increasing film thickness. Moreover, as a proof of the interface-dependent Tgs, hydrogen bonds of PMMA/quartz and molecules orientation of PMMA/silver are explored by the Raman spectroscopy, and the interfacial interaction energy is calculated by the molecular dynamics simulation. In this study, we probe the inter-relationship between the interfacial interactions arising from the different substrates and the Tg behavior of polymer thin films.
| S-EPMC6523344 | biostudies-literature
Project description:A promising approach to solving hard binary optimization problems is quantum adiabatic annealing in a transverse magnetic field. An instantaneous ground state-initially a symmetric superposition of all possible assignments of N qubits-is closely tracked as it becomes more and more localized near the global minimum of the classical energy. Regions where the energy gap to excited states is small (for instance at the phase transition) are the algorithm's bottlenecks. Here I show how for large problems the complexity becomes dominated by O(log N) bottlenecks inside the spin-glass phase, where the gap scales as a stretched exponential. For smaller N, only the gap at the critical point is relevant, where it scales polynomially, as long as the phase transition is second order. This phenomenon is demonstrated rigorously for the two-pattern Gaussian Hopfield model. Qualitative comparison with the Sherrington-Kirkpatrick model leads to similar conclusions.
| S-EPMC4980455 | biostudies-literature
Project description:Plasmon hybridization theory, inspired by molecular orbital theory, has been extremely successful in describing the near-field coupling in clusters of plasmonic nanoparticles, also known as plasmonic molecules. However, the vibrational modes of plasmonic molecules have been virtually unexplored. By designing precisely configured plasmonic molecules of varying complexity and probing them at the individual plasmonic molecule level, intramolecular coupling of acoustic modes, mediated by the underlying substrate, is observed. The strength of this coupling can be manipulated through the configuration of the plasmonic molecules. Surprisingly, classical continuum elastic theory fails to account for the experimental trends, which are well described by a simple coupled oscillator picture that assumes the vibrational coupling is mediated by coherent phonons with low energies. These findings provide a route to the systematic optical control of the gigahertz response of metallic nanostructures, opening the door to new optomechanical device strategies.
| S-EPMC5676925 | biostudies-literature
Project description:The crystallization of two dihydropyridyl molecules, 1,4-bis(4-(3,5-dicyano-2,6-dipyridyl)dihydropyridyl)benzene ([C40H24N10]·2DMF, 1·2DMF; DMF = dimethylformamide) and 1,4-bis(4-(3,5-dicyano-2,6-dipyridyl)dihydropyridyl)phenylbenzene ([C46H28N10]·2DMF, 3·2DMF), and their respective oxidized pyridyl analogues, 1,4-bis(4-(3,5-dicyano-2,6-dipyridyl)pyridyl)benzene ([C40H20N10], 2) and 1,4-bis(4-(3,5-dicyano-2,6-dipyridyl)pyridyl)phenylbenzene ([C46H24N10]·DMF, 4·DMF), has been achieved under solvothermal conditions. The dihydropyridyl molecules are converted to their pyridyl products via in situ oxidative dehydrogenation in solution. The structures of the four molecules have been fully characterized by single crystal and powder X-ray diffraction. The oxidized pyridyl products, 2 and 4, are more elongated due to aromatization of the dihydropyridyl rings at each end of their parent molecules 1 and 3, respectively. The solid-state supramolecular structures of the pyridyl molecules are distinct from the dihydropyridyl molecules in terms of their hierarchical assembly via hydrogen bonding due to the loss of primary N-H hydrogen bond donors in the two electron oxidized tectons. Overall, the geometrically shorter molecules 1 and 3 display close-packed structures, whereas the more extended 2 and 4 assemble into more open supramolecular systems.
| S-EPMC4583071 | biostudies-literature
Project description:The kinetic entrapment of molecules in an amorphous phase is a common obstacle to cocrystal screening using rapid solvent removal, especially for drugs with a moderate or high glass-forming ability (GFA). The aim of this study was to elucidate the effects of the coformer's GFA and annealing conditions on the nature of amorphous phase transformation to the cocrystal counterpart. Attempts were made to cocrystallize voriconazole (VRC) with four structural analogues, namely fumaric acid (FUM), tartaric acid (TAR), malic acid (MAL), and maleic acid (MAE). The overall GFA of VRC binary systems increased with decreasing glass transition temperatures (Tgs) of these diacids, which appeared as a critical parameter for predicting the cocrystallization propensity such that a high-Tg coformer is more desirable. A new 1:1 VRC-TAR cocrystal was successfully produced via a supercooled-mediated re-cocrystallization process, and characterized by PXRD, DSC, and FTIR. The cocrystal purity against the annealing temperature displayed a bell-shaped curve, with a threshold at 40 °C. The isothermal phase purity improved with annealing and adhered to the Kolmogorov-Johnson-Mehl-Avrami kinetics. The superior dissolution behavior of the VRC-TAR cocrystal could minimize VRC precipitation upon gastric emptying. This study offers a simple but useful guide for efficient cocrystal screening based on the Tg of structurally similar coformers, annealing temperature, and time.
| S-EPMC7764899 | biostudies-literature
Project description:Density and hardness of glasses are known to increase upon both compression at the glass transition temperature (Tg) and ambient pressure sub-Tg annealing. However, a serial combination of the two methods does not result in higher density and hardness, since the effect of compression is countered by subsequent annealing and vice versa. In this study, we circumvent this by introducing a novel treatment protocol that enables the preparation of high-density, high-hardness bulk aluminosilicate glasses. This is done by first compressing a sodium-magnesium aluminosilicate glass at 1 GPa at Tg, followed by sub-Tg annealing in-situ at 1 GPa. Through density, hardness, and heat capacity measurements, we demonstrate that the effects of hot compression and sub-Tg annealing can be combined to access a "forbidden glass" regime that is inaccessible through thermal history or pressure history variation alone. We also study the relaxation behavior of the densified samples during subsequent ambient pressure sub-Tg annealing. Density and hardness are found to relax and approach their ambient condition values upon annealing, but the difference in relaxation time of density and hardness, which is usually observed for hot compressed glasses, vanishes for samples previously subjected to high-pressure sub-Tg annealing. This confirms the unique configurational state of these glasses.
| S-EPMC5394531 | biostudies-literature
Project description:We investigate the magneto-transport properties of epitaxial graphene single-layer on 4H-SiC(0001), grown by atmospheric pressure graphitization in Ar, followed by H2 intercalation. We directly demonstrate the importance of saturating the Si dangling bonds at the graphene/SiC(0001) interface to achieve high carrier mobility. Upon successful Si dangling bonds elimination, carrier mobility increases from 3 000 cm(2)V(-1)s(-1) to >11 000 cm(2)V(-1)s(-1) at 0.3 K. Additionally, graphene electron concentration tends to decrease from a few 10(12) cm(-2) to less than 10(12) cm(-2). For a typical large (30 × 280 μm(2)) Hall bar, we report the observation of the integer quantum Hall states at 0.3 K with well developed transversal resistance plateaus at Landau level filling factors of ν = 2, 6, 10, 14... 42 and Shubnikov de Haas oscillation of the longitudinal resistivity observed from about 1 T. In such a device, the Hall state quantization at ν = 2, at 19 T and 0.3 K, can be very robust: the dissipation in electronic transport can stay very low, with the longitudinal resistivity lower than 5 mΩ, for measurement currents as high as 250 μA. This is very promising in the view of an application in metrology.
| S-EPMC3972502 | biostudies-other
Project description:The MHC class I gene family of rhesus macaques is characterised by considerable gene duplications. While a HLA-C-orthologous gene is absent, the Mamu-A and in particular the Mamu-B genes have expanded, giving rise to plastic haplotypes with differential gene content. Although some of the rhesus macaque MHC class I genes are known to be associated with susceptibility/resistance to infectious diseases, the functional significance of duplicated Mamu-A and Mamu-B genes and the expression pattern of their encoded proteins are largely unknown. Here, we present data of the subcellular localization of AcGFP-tagged Mamu-A and Mamu-B molecules. We found strong cell surface and low intracellular expression for Mamu-A1, Mamu-A2 and Mamu-A3-encoded molecules as well as for Mamu-B*01704, Mamu-B*02101, Mamu-B*04801, Mamu-B*06002 and Mamu-B*13401. In contrast, weak cell surface and strong intracellular expression was seen for Mamu-A4*1403, Mamu-B*01202, Mamu-B*02804, Mamu-B*03002, Mamu-B*05704, Mamu-I*010201 and Mamu-I*0121. The different expression patterns were assigned to the antigen-binding alpha1 and alpha2 domains, suggesting failure of peptide binding is responsible for retaining 'intracellular' Mamu class I molecules in the endoplasmic reticulum. These findings indicate a diverse functional role of the duplicated rhesus macaque MHC class I genes.
| S-EPMC3128699 | biostudies-literature
Project description:The temperature of nanoparticles is a critical parameter in applications that range from biology, to sensors, to photocatalysis. Yet, accurately determining the absolute temperature of nanoparticles is intrinsically difficult because traditional temperature probes likely deliver inaccurate results due to their large thermal mass compared to the nanoparticles. Here we present a hydrogen nanothermometry method that enables a noninvasive and direct measurement of absolute Pd nanoparticle temperature via the temperature dependence of the first-order phase transformation during Pd hydride formation. We apply it to accurately measure light-absorption-induced Pd nanoparticle heating at different irradiated powers with 1 °C resolution and to unravel the impact of nanoparticle density in an array on the obtained temperature. In a wider perspective, this work reports a noninvasive method for accurate temperature measurements at the nanoscale, which we predict will find application in, for example, nano-optics, nanolithography, and plasmon-mediated catalysis to distinguish thermal from electronic effects.
| S-EPMC9047005 | biostudies-literature