Quantification of thickness and wrinkling of exfoliated two-dimensional zeolite nanosheets.
Ontology highlight
ABSTRACT:
SUBMITTER: Kumar P
PROVIDER: S-EPMC4432588 | biostudies-literature | 2015 May
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Two-dimensional (2D) zeolite nanosheets are important for the synthesis of high flux zeolite membranes due to their lateral size in a preferred orientation. A way to obtain 2D zeolite nanosheets is to exfoliate interlocked structures generated during the hydrothermal synthesis. The mechanical and polymer assisted exfoliation process leads to mechanical damage in nanosheets and short lateral size. In the present study, polyvinylpyrrolidone (PVP) was introduced as an exfoliation agent and dispersant, so that multilamellar interlocked silicalite-1 zeolite nanosheets successfully exfoliated into a large lateral size (individual nanosheets 500~1200 nm). The good exfoliation behavior was due to the strong penetration of PVP into multilamellar nanosheets. Sonication assisted by mild milling helps PVP molecules to penetrate through the lamellar structure, contributing to the expansion of the distance between adjacent layers and thus decreasing the interactions between each layer. In addition, the stability of exfoliated nanosheets was evaluated with a series of organic solvents. The exfoliated nanosheets were well dispersed in n-butanol and stable for 30 days. Therefore, the PVP-assisted solution-based exfoliation process provides high aspect ratio MFI zeolite nanosheets in organic solvents for a long period.
| S-EPMC8472291 | biostudies-literature
Project description:A simple and effective method for direct exfoliation of tungsten diselenide (WSe2) into few-layered nanosheets has been successfully developed by employing a low molecular weight adenine-functionalized supramolecular polymer (A-PPG). In this study, we discover A-PPG can self-assemble into a long-range, ordered lamellar microstructure on the surface of WSe2 due to the efficient non-covalent interactions between A-PPG and WSe2. Morphological and light scattering studies confirmed the dynamic self-assembly behavior of A-PPG has the capacity to efficiently manipulate the transition between contractile and extended lamellar microstructures on the surface of metallic 1T-phase and semiconducting 2H-phase WSe2 nanosheets, respectively. The extent of WSe2 exfoliation can be easily controlled by systematically adjusting the amount of A-PPG in the composites, to obtain nanocomposites with the desired functional characteristics. In addition, the resulting composites possess unique liquid-solid phase transition behavior and excellent thermoreversible properties, revealing the self-assembled lamellar structure of A-PPG functions as a critical factor to manipulate and tailor the physical properties of exfoliated WSe2. This newly developed method of producing exfoliated WSe2 provides a useful conceptual and potential framework for developing WSe2-based multifunctional nanocomposites to extend their application in solution-processed semiconductor devices.
| S-EPMC6011224 | biostudies-literature
Project description:Monolayer TiS2 is the lightest member of the transition metal dichalcogenide family with promising applications in energy storage and conversion systems. The use of TiS2 has been limited by the lack of rapid characterization of layer numbers via Raman spectroscopy and its easy oxidation in wet environment. Here, we demonstrate the layer-number-dependent Raman modes for TiS2. 1T TiS2 presents two characteristics of the Raman active modes, A1g (out-of-plane) and Eg (in-plane). We identified a characteristic peak frequency shift of the Eg mode with the layer number and an unexplored Raman mode at 372 cm-1 whose intensity changes relative to the A1g mode with the thickness of the TiS2 sheets. These two characteristic features of Raman spectra allow the determination of layer numbers between 1 and 5 in exfoliated TiS2. Further, we develop a method to produce oxidation-resistant inks of micron-sized mono- and few-layered TiS2 nanosheets at concentrations up to 1 mg/mL. These TiS2 inks can be deposited to form thin films with controllable thickness and nanosheet density over square centimeter areas. This opens up pathways for a wider utilization of exfoliated TiS2 toward a range of applications.
| S-EPMC6645014 | biostudies-literature
Project description:Molybdenum dioxide (MoO2) a kind of semi-metal material shows many unique properties, such as high melting point, good thermal stability, large surface area-to-volume ratio, high-density surface unsaturated atoms, and excellent conductivity. There is a strong connection between structural type and optoelectronic properties of 2D nanosheet. Herein, the rectangular and hexagonal types of thin and thick MoO2 2D nanosheets were successfully prepared from MoO3 powder using two-zone chemical vapor deposition (CVD) with changing the experimental parameters, and these fabricated nanosheets displayed different colors under bright-field microscope, possess margins and smooth surface. The thickness of the blue hexagonal and rectangular MoO2 nanosheets are ~ 25 nm and ~ 30 nm, respectively, while typical thickness of orange-colored nanosheet is around ~ 100 nm. Comparative analysis and investigations were carried out, and mix-crystal phases were indentified in thick MoO2 as main matrix through Raman spectroscopy. For the first time, the emission bands obtained in thick MoO2 nanosheets via a Cathodoluminescence (CL) system exhibiting special properties of semi-metallic and semi-conductors; however, no CL emission detected in case of thin nanosheets. The electrical properties of thin MoO2 nanosheets with different morphologies were compared, and both of them demonstrated varying metallic properties. The resistance of thin rectangular nanosheet was ~ 25 Ω at ± 0.05 V while 64 Ω at ± 0.05 V was reported for hexagonal nanosheet, and observed lesser resistance by rectangular nanosheet than hexagonal nanosheet.
| S-EPMC7395921 | biostudies-literature
Project description:A quantitative understanding of the nanoscale piezoelectric property will unlock many application potentials of the electromechanical coupling phenomenon under quantum confinement. In this work, we present an atomic force microscopy- (AFM-) based approach to the quantification of the nanometer-scale piezoelectric property from single-crystalline zinc oxide nanosheets (NSs) with thicknesses ranging from 1 to 4 nm. By identifying the appropriate driving potential, we minimized the influences from electrostatic interactions and tip-sample coupling, and extrapolated the thickness-dependent piezoelectric coefficient (d 33). By averaging the measured d 33 from NSs with the same number of unit cells in thickness, an intriguing tri-unit-cell relationship was observed. From NSs with 3n unit cell thickness (n = 1, 2, 3), a bulk-like d 33 at a value of ~9 pm/V was obtained, whereas NSs with other thickness showed a ~30% higher d 33 of ~12 pm/V. Quantification of d 33 as a function of ZnO unit cell numbers offers a new experimental discovery toward nanoscale piezoelectricity from nonlayered materials that are piezoelectric in bulk.
| S-EPMC7936626 | biostudies-literature
Project description:As one of the key features of two-dimensional (2D) layered materials, stacking order has been found to play an important role in modulating the interlayer interactions of 2D materials, potentially affecting their electronic and other properties as a consequence. In this work, ultralow-frequency (ULF) Raman spectroscopy, electrostatic force microscopy (EFM), and high-resolution atomic force microscopy (HR-AFM) were used to systematically study the effect of stacking order on the interlayer interactions as well as electrostatic screening of few-layer polymorphic molybdenum disulfide (MoS2) and molybdenum diselenide (MoSe2) nanosheets. The stacking order difference was first confirmed by measuring the ULF Raman spectrum of the nanosheets with polymorphic stacking domains. The atomic lattice arrangement revealed using HR-AFM also clearly showed a stacking order difference. In addition, EFM phase imaging clearly presented the distribution of the stacking domains in the mechanically exfoliated nanosheets, which could have arisen from electrostatic screening. The results indicate that EFM in combination with ULF Raman spectroscopy could be a simple, fast, and high-resolution method for probing the distribution of polymorphic stacking domains in 2D transition metal dichalcogenide materials. Our work might be promising for correlating the interlayer interactions of TMDC nanosheets with stacking order, a topic of great interest with regard to modulating their optoelectronic properties.
| S-EPMC10892501 | biostudies-literature
Project description:Direct exfoliation of layered zeolites into solutions of monolayers has remained unresolved since the 1990s. Recently, zeolite MCM-56 with the MWW topology (layers denoted mww) has been exfoliated directly in high yield by soft-chemical treatment with tetrabutylammonium hydroxide (TBAOH). This has enabled preparation of zeolite-based hierarchical materials and intimate composites with other active species that are unimaginable via the conventional solid-state routes. The extension to other frameworks, which provides broader benefits, diversified activity, and functionality, is not routine and requires finding suitable synthesis formulations, viz. compositions and conditions, of the layered zeolites themselves. This article reports exfoliation and characterization of layers with ferrierite-related structure, denoted bifer, having rectangular lattice constants like those of the FER and CDO zeolites, and thickness of approximately 2 nm, which is twice that of the so-called fer layer. Several techniques were combined to prove the exfoliation, supported by simulations: AFM; in-plane, in situ, and powder X-ray diffraction; TEM; and SAED. The results confirmed (i) the structure and crystallinity of the layers without unequivocal differentiation between the FER and CDO topologies and (ii) uniform thickness in solution (monodispersity), ruling out significant multilayered particles and other impurities. The bifer layers are zeolitic with Brønsted acid sites, demonstrated catalytic activity in the alkylation of mesitylene with benzyl alcohol, and intralayer pores visible in TEM. The practical benefits are demonstrated by the preparation of unprecedented intimately mixed zeolite composites with the mww, with activity greater than the sum of the components despite high content of inert silica as pillars.
| S-EPMC8397323 | biostudies-literature
Project description:We describe a new approach to synthesize two-dimensional (2D) nanosheets from the bottom-up. We functionalize redox-active superatoms with groups that can direct their assembly into multidimensional solids. We synthesized Co6Se8[PEt2(4-C6H4COOH)]6 and found that it forms a crystalline assembly. The solid-state structure is a three-dimensional (3D) network in which the carboxylic acids form intercluster hydrogen bonds. We modify the self-assembly by replacing the reversible hydrogen bonds that hold the superatoms together with zinc carboxylate bonds via the solvothermal reaction of Co6Se8[PEt2(4-C6H4COOH)]6 with Zn(NO3)2. We obtain two types of crystalline materials using this approach: one is a 3D solid and the other consists of stacked layers of 2D sheets. The dimensionality is controlled by subtle changes in reaction conditions. These 2D sheets can be chemically exfoliated, and the exfoliated, ultrathin 2D layers are soluble. After they are deposited on a substrate, they can be imaged. We cast them onto an electrode surface and show that they retain the redox activity of the superatom building blocks due to the porosity in the sheets.
| S-EPMC5620970 | biostudies-literature
Project description:Two new imide-based crystalline, porous, and chemically stable covalent organic frameworks (COFs) (TpBDH and TfpBDH) have been successfully synthesized employing solvothermal crystallization route. Furthermore, thin layered covalent organic nanosheets (CONs) were derived from these bulk COFs by the simple liquid phase exfoliation method. These 2D CONs showcase increased luminescence intensity compared to their bulk counterparts (COFs). Notably, TfpBDH-CONs showcase good selectivity and prominent, direct visual detection towards different nitroaromatic analytes over TpBDH-CONs. Quite interestingly, TfpBDH-CONs exhibit a superior "turn-on" detection capability for 2,4,6-trinitrophenol (TNP) in the solid state, but conversely, they also show a "turn-off" detection in the dispersion state. These findings describe a new approach towards developing an efficient, promising fluorescence chemosensor material for both visual and spectroscopic detection of nitroaromatic compounds with very low [10-5 (M)] analyte concentrations.
| S-EPMC5707461 | biostudies-literature
Project description:Two-dimensional (2D) nanosheets as carriers have shown promising potential for surface-displaying or loading various drugs. Nevertheless, developing sheet-like materials themselves into an immunoregulator has never been realized so far. In this study, we take advantage of the immunoregulatory effects of rare earth elements themselves and develop water-soluble erbium-dysprosium 2D nanosheets (2D NSs). Such 2D NSs can target lymph nodes and activate macrophages to improve vaccine efficacy in mice significantly. Transcriptome analysis further reveals that six critical molecules (Msr1, Ccr2, Serpinb9, Klrk1, Klrd1, Klrc1) closely correlate with 2D NS-mediated immunoregulation in vivo. For the first time, the present work realizes a proof-of-concept for designing immunoregulatory 2D NSs and shows a promising potential of 2D NSs for improving the immunoprophylaxis/immunotherapy of vaccines.
| S-EPMC8694375 | biostudies-literature