Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Water-Gas Shift and Methane Reactivity on Reducible Perovskite-Type Oxides.

ABSTRACT: Comparative (electro)catalytic, structural, and spectroscopic studies in hydrogen electro-oxidation, the (inverse) water-gas shift reaction, and methane conversion on two representative mixed ionic-electronic conducting perovskite-type materials La0.6Sr0.4FeO3-? (LSF) and SrTi0.7Fe0.3O3-? (STF) were performed with the aim of eventually correlating (electro)catalytic activity and associated structural changes and to highlight intrinsic reactivity characteristics as a function of the reduction state. Starting from a strongly prereduced (vacancy-rich) initial state, only (inverse) water-gas shift activity has been observed on both materials beyond ca. 450 °C but no catalytic methane reforming or methane decomposition reactivity up to 600 °C. In contrast, when starting from the fully oxidized state, total methane oxidation to CO2 was observed on both materials. The catalytic performance of both perovskite-type oxides is thus strongly dependent on the degree/depth of reduction, on the associated reactivity of the remaining lattice oxygen, and on the reduction-induced oxygen vacancies. The latter are clearly more reactive toward water on LSF, and this higher reactivity is linked to the superior electrocatalytic performance of LSF in hydrogen oxidation. Combined electron microscopy, X-ray diffraction, and Raman measurements in turn also revealed altered surface and bulk structures and reactivities.

SUBMITTER: Thalinger R

PROVIDER: S-EPMC4450368 | biostudies-literature | 2015 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Lattice oxygen self-spillover on reducible oxide supported metal cluster: the water-gas shift reaction on Cu/CeO<sub>2</sub> catalyst.

Project description:In this work we have tackled one of the most challenging problems in nanocatalysis namely understanding the role of reducible oxide supports in metal catalyzed reactions. As a prototypical example, the very well-studied water gas shift reaction catalyzed by CeO2 supported Cu nanoclusters is chosen to probe how the reducible oxide support modifies the catalyst structures, catalytically active sites and even the reaction mechanisms. By employing density functional theory calculations in conjunction with a genetic algorithm and ab initio molecular dynamics simulations, we have identified an unprecedented spillover of the surface lattice oxygen from the ceria support to the Cu cluster, which is rarely considered previously but may widely exist in oxide supported metal catalysts under realistic conditions. The oxygen spillover causes a highly energetic preference of the monolayered configuration of the supported Cu nanocluster, compared to multilayered configurations. Due to the strong metal-oxide interaction, after the O spillover the monolayered cluster is highly oxidized by transferring electrons to the Ce 4f orbitals. The water-gas-shift reaction is further found to more favorably take place on the supported copper monolayer than the copper-ceria periphery, where the on-site oxygen and the adjacent oxidized Cu sites account for the catalytically active sites, synergistically facilitating the water dissociation and the carboxyl formation. The present work provides mechanistic insights into the strong metal-support interaction and its role in catalytic reactions, which may pave a way towards the rational design of metal-oxide catalysts with promising stability, dispersion and catalytic activity.

| S-EPMC8208302 | biostudies-literature

Praseodymia-titania mixed oxide supported gold as efficient water gas shift catalyst: modulated by the mixing ratio of oxides.

Project description:Modulating the active sites for controllable tuning of the catalytic activity has been the goal of much research, however, this remains challenging. The O vacancy is well known as an active site in reducible oxides. To modify the activity of O vacancies in praseodymia, we synthesized a series of praseodymia-titania mixed oxides. Varying the Pr : Ti mole ratio (2 : 1, 1 : 2, 1 : 1, 1 : 4) allows us to control the electronic interactions between Au, Pr and Ti cations and the local chemical environment of the O vacancies. These effects have been studied study by X-ray photoelectron spectroscopy (XPS), CO diffuse reflectance Fourier transform infrared spectroscopy (CO-DRIFTS) and temperature-programmed reduction (CO-TPR, H2-TPR). The water gas shift reaction (WGSR) was used as a benchmark reaction to test the catalytic performance of different praseodymia-titania supported Au. Among them, Au/Pr1Ti2O x was identified to exhibit the highest activity, with a CO conversion of 75% at 300 °C, which is about 3.7 times that of Au/TiO2 and Au/PrO x . The Au/Pr1Ti2O x also exhibited excellent stability, with the conversion after 40 h time-on-stream at 300 °C still being 67%. An optimal ratio of Pr content (Pr : Ti 1 : 2) is necessary for improving the surface oxygen mobility and oxygen exchange capability, a higher Pr content leads to more O vacancies, however with lower activity. This study presents a new route for modulating the active defect sites in mixed oxides which could also be extended to other heterogeneous catalysis systems.

| S-EPMC8981221 | biostudies-literature

Quantum confined two-dimensional electron/hole gas switching by facet orientation of perovskite oxides.

Project description:The Polar discontinuity at heterointerface and the bare surface reconstructs the electronic phase of perovskite oxides. This gives rise to confined free electrons which intrinsically transit material from band insulator to metal. However, the insulator-metal transition induced by free holes has not been investigated so far due to the challenge in obtaining free hole state in oxides. Here, we propose a simple method whereby free holes can be obtained via polar facet reorientation. In the high polarity case, free holes can be supported by the lift up of O 2p subbands, which split into three independent subbands (one heavy hole subband and two light hole subbands) due to strong quantum confinement. Results show that both of the free electron and hole states are confined in a two dimensional quantum well, subjecting to the confined energy (E - E F) and occupied density of states around the Fermi level, indicating a finite thickness for preserving the metal states.

| S-EPMC9080832 | biostudies-literature

Heterostructure Engineering of a Reverse Water Gas Shift Photocatalyst.

Project description:To achieve substantial reductions in CO2 emissions, catalysts for the photoreduction of CO2 into value-added chemicals and fuels will most likely be at the heart of key renewable-energy technologies. Despite tremendous efforts, developing highly active and selective CO2 reduction photocatalysts remains a great challenge. Herein, a metal oxide heterostructure engineering strategy that enables the gas-phase, photocatalytic, heterogeneous hydrogenation of CO2 to CO with high performance metrics (i.e., the conversion rate of CO2 to CO reached as high as 1400 µmol g cat-1 h-1) is reported. The catalyst is comprised of indium oxide nanocrystals, In2O3- x (OH) y , nucleated and grown on the surface of niobium pentoxide (Nb2O5) nanorods. The heterostructure between In2O3- x (OH) y nanocrystals and the Nb2O5 nanorod support increases the concentration of oxygen vacancies and prolongs excited state (electron and hole) lifetimes. Together, these effects result in a dramatically improved photocatalytic performance compared to the isolated In2O3- x (OH) y material. The defect optimized heterostructure exhibits a 44-fold higher conversion rate than pristine In2O3- x (OH) y . It also exhibits selective conversion of CO2 to CO as well as long-term operational stability.

| S-EPMC6864495 | biostudies-literature

Catalytic Nucleophilic Allylation Driven by the Water-Gas Shift Reaction.

Project description:The ruthenium-catalyzed allylation of aldehydes with allylic pro-nucleophiles has been demonstrated to be an efficient means to form carbon-carbon bonds under mild conditions. The evolution of this reaction from the initial serendipitous discovery to its general synthetic scope is detailed, highlighting the roles of water, CO, and amine in the generation of a more complete catalytic cycle. The use of unsymmetrical allylic pro-nucleophiles was shown to give preferential product formation through the modulation of reaction conditions. Both (E)-cinnamyl acetate and vinyl oxirane were efficiently used to form the anti-branched products (up to >20:1 anti/syn) and E-linear products (up to >20:1 E/Z) in high selectivity with aromatic, α,β-unsaturated, and aliphatic aldehydes, respectively. Attempts to render the reaction enantioselective are highlighted and include enantioenrichment of up to 75:25 for benzaldehyde.

| S-EPMC6008792 | biostudies-literature

Methane contamination of drinking water accompanying gas-well drilling and hydraulic fracturing.

Project description:Directional drilling and hydraulic-fracturing technologies are dramatically increasing natural-gas extraction. In aquifers overlying the Marcellus and Utica shale formations of northeastern Pennsylvania and upstate New York, we document systematic evidence for methane contamination of drinking water associated with shale-gas extraction. In active gas-extraction areas (one or more gas wells within 1 km), average and maximum methane concentrations in drinking-water wells increased with proximity to the nearest gas well and were 19.2 and 64 mg CH(4) L(-1) (n = 26), a potential explosion hazard; in contrast, dissolved methane samples in neighboring nonextraction sites (no gas wells within 1 km) within similar geologic formations and hydrogeologic regimes averaged only 1.1 mg L(-1) (P < 0.05; n = 34). Average δ(13)C-CH(4) values of dissolved methane in shallow groundwater were significantly less negative for active than for nonactive sites (-37 ± 7‰ and -54 ± 11‰, respectively; P < 0.0001). These δ(13)C-CH(4) data, coupled with the ratios of methane-to-higher-chain hydrocarbons, and δ(2)H-CH(4) values, are consistent with deeper thermogenic methane sources such as the Marcellus and Utica shales at the active sites and matched gas geochemistry from gas wells nearby. In contrast, lower-concentration samples from shallow groundwater at nonactive sites had isotopic signatures reflecting a more biogenic or mixed biogenic/thermogenic methane source. We found no evidence for contamination of drinking-water samples with deep saline brines or fracturing fluids. We conclude that greater stewardship, data, and-possibly-regulation are needed to ensure the sustainable future of shale-gas extraction and to improve public confidence in its use.

| S-EPMC3100993 | biostudies-literature

Nucleation and dissociation of methane clathrate embryo at the gas-water interface.

Project description:Among natural energy resources, methane clathrate has attracted tremendous attention because of its strong relevance to current energy and environment issues. Yet little is known about how the clathrate starts to nucleate and disintegrate at the molecular level, because such microscopic processes are difficult to probe experimentally. Using surface-specific sum-frequency vibrational spectroscopy, we have studied in situ the nucleation and disintegration of methane clathrate embryos at the methane-gas-water interface under high pressure and different temperatures. Before appearance of macroscopic methane clathrate, the interfacial structure undergoes 3 stages as temperature varies, namely, dissolution of methane molecules into water interface, formation of cage-like methane-water complexes, and appearance of microscopic methane clathrate, while the bulk water structure remains unchanged. We find spectral features associated with methane-water complexes emerging in the induction time. The complexes are present over a wide temperature window and act as nuclei for clathrate growth. Their existence in the melt of clathrates explains why melted clathrates can be more readily recrystallized at higher temperature, the so-called "memory effect." Our findings here on the nucleation mechanism of clathrates could provide guidance for rational control of formation and disintegration of clathrates.

| S-EPMC6876187 | biostudies-literature

Electronic parameters in cobalt-based perovskite-type oxides as descriptors for chemocatalytic reactions.

Project description:Perovskite-type transition metal (TM) oxides are effective catalysts in oxidation and decomposition reactions. Yet, the effect of compositional variation on catalytic efficacy is not well understood. The present analysis of electronic characteristics of B-site substituted LaCoO3 derivatives via in situ X-ray absorption spectroscopy (XAS) establishes correlations of electronic parameters with reaction rates: TM t2g and eg orbital occupancy yield volcano-type or non-linear correlations with NO oxidation, CO oxidation and N2O decomposition rates. Covalent O 2p-TM 3d interaction, in ultra-high vacuum, is a linear descriptor for reaction rates in NO oxidation and CO oxidation, and for N2O decomposition rates in O2 presence. Covalency crucially determines the ability of the catalytically active sites to interact with surface species during the kinetically relevant step of the reaction. The nature of the kinetically relevant step and of surface species involved lead to the vast effect of XAS measurement conditions on the validity of correlations.

| S-EPMC6994687 | biostudies-literature

The most active Cu facet for low-temperature water gas shift reaction.

Project description:Identification of the active site is important in developing rational design strategies for solid catalysts but is seriously blocked by their structural complexity. Here, we use uniform Cu nanocrystals synthesized by a morphology-preserved reduction of corresponding uniform Cu2O nanocrystals in order to identify the most active Cu facet for low-temperature water gas shift (WGS) reaction. Cu cubes enclosed with {100} facets are very active in catalyzing the WGS reaction up to 548 K while Cu octahedra enclosed with {111} facets are inactive. The Cu-Cu suboxide (CuxO, x ≥ 10) interface of Cu(100) surface is the active site on which all elementary surface reactions within the catalytic cycle proceed smoothly. However, the formate intermediate was found stable at the Cu-CuxO interface of Cu(111) surface with consequent accumulation and poisoning of the surface at low temperatures. Thereafter, Cu cubes-supported ZnO catalysts are successfully developed with extremely high activity in low-temperature WGS reaction.Nanocrystals display a variety of facets with different catalytic activity. Here the authors identify the most active facet of copper nanocrystals relevant to the low-temperature water gas shift reaction and further design zinc oxide-copper nanocubes with exceptionally high catalytic activity.

| S-EPMC5591213 | biostudies-literature

Room-temperature electrochemical water-gas shift reaction for high purity hydrogen production.

Project description:Traditional water-gas shift reaction provides one primary route for industrial production of clean-energy hydrogen. However, this process operates at high temperatures and pressures, and requires additional separation of H2 from products containing CO2, CH4 and residual CO. Herein, we report a room-temperature electrochemical water-gas shift process for direct production of high purity hydrogen (over 99.99%) with a faradaic efficiency of approximately 100%. Through rational design of anode structure to facilitate CO diffusion and PtCu catalyst to optimize CO adsorption, the anodic onset potential is lowered to almost 0 volts versus the reversible hydrogen electrode at room temperature and atmospheric pressure. The optimized PtCu catalyst achieves a current density of 70.0 mA cm-2 at 0.6 volts which is over 12 times that of commercial Pt/C (40 wt.%) catalyst, and remains stable for even more than 475 h. This study opens a new and promising route of producing high purity hydrogen.

| S-EPMC6325145 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data