Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

LUMOS--A Sensitive and Reliable Optode System for Measuring Dissolved Oxygen in the Nanomolar Range.

ABSTRACT: Most commercially available optical oxygen sensors target the measuring range of 300 to 2 μmol L-1. However these are not suitable for investigating the nanomolar range which is relevant for many important environmental situations. We therefore developed a miniaturized phase fluorimeter based measurement system called the LUMOS (Luminescence Measuring Oxygen Sensor). It consists of a readout device and specialized "sensing chemistry" that relies on commercially available components. The sensor material is based on palladium(II)-5,10,15,20-tetrakis-(2,3,4,5,6-pentafluorphenyl)-porphyrin embedded in a Hyflon AD 60 polymer matrix and has a KSV of 6.25 x 10-3 ppmv-1. The applicable measurement range is from 1000 nM down to a detection limit of 0.5 nM. A second sensor material based on the platinum(II) analogue of the porphyrin is spectrally compatible with the readout device and has a measurement range of 20 μM down to 10 nM. The LUMOS device is a dedicated system optimized for a high signal to noise ratio, but in principle any phase flourimeter can be adapted to act as a readout device for the highly sensitive and robust sensing chemistry. Vise versa, the LUMOS fluorimeter can be used for read out of less sensitive optical oxygen sensors based on the same or similar indicator dyes, for example for monitoring oxygen at physiological conditions. The presented sensor system exhibits lower noise, higher resolution and higher sensitivity than the electrochemical STOX sensor previously used to measure nanomolar oxygen concentrations. Oxygen contamination in common sample containers has been investigated and microbial or enzymatic oxygen consumption at nanomolar concentrations is presented.

SUBMITTER: Lehner P

PROVIDER: S-EPMC4451986 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Smartphone "Selfies"-A reliable and accurate tool for measuring elbow range of motion.

Project description:BackgroundTo determine if self-taken photographs ("selfies"), performed independently after instruction by video or illustrated handout, would be an accurate and reliable tool for capturing elbow range of motion in patients with elbow contractures.MethodsFifty patients presenting with elbow contractures participated in the study. After completion of the selfie, the senior author clinically measured flexion and extension with a goniometer. The angles from the photographs were measured and analyzed.ResultsThe agreement between goniometer and "selfie" measurements correlated closely (R2 = 0.98) and agreement was excellent in both extension and in flexion with intra-class correlation coefficients of 0.95 (95% CI 0.92 to 0.97) in extension with a mean difference of 2° (95% CI -3° to 7°), and 0.93 (95% CI 0.89 to 0.96) in flexion with a mean difference of 4° (95% CI 0° to 8°). Systematic errors were low in extension, 0° (95% CI, ±11°) and in flexion -3° (95% CI, ±10°). Six patients demonstrated ≥10° difference between clinical and selfie measurements. Ability to take a usable selfie was inversely correlated with age (R2 = 0.97).DiscussionSelf-taken flexion-extension photographs are a reliable and accurate tool for measuring elbow range of motion. Errors in the selfie technique are well tolerated and appear to have a negligible effect upon measurements of motion. This important parameter of elbow function can therefore be obtained outside a normal clinic visit, thereby improving frequency of follow-up assessments (and minimizing loss to follow-up) necessary for quality control and research.

| S-EPMC8512996 | biostudies-literature

An oxygen-sensitive toxin-antitoxin system.

Project description:The Hha and TomB proteins from Escherichia coli form an oxygen-dependent toxin-antitoxin (TA) system. Here we show that YmoB, the Yersinia orthologue of TomB, and its single cysteine variant [C117S]YmoB can replace TomB as antitoxins in E. coli. In contrast to other TA systems, [C117S]YmoB transiently interacts with Hha (rather than forming a stable complex) and enhances the spontaneous oxidation of the Hha conserved cysteine residue to a -SOxH-containing species (sulfenic, sulfinic or sulfonic acid), which destabilizes the toxin. The nuclear magnetic resonance structure of [C117S]YmoB and the homology model of TomB show that the two proteins form a four-helix bundle with a conserved buried cysteine connected to the exterior by a channel with a diameter comparable to that of an oxygen molecule. The Hha interaction site is located on the opposite side of the helix bundle.

| S-EPMC5155140 | biostudies-literature

Highly Sensitive Dissolved Oxygen Sensor with a Sustainable Antifouling, Antiabrasion, and Self-Cleaning Superhydrophobic Surface.

Project description:Long-term sensing of dissolved oxygen in aqueous solution always suffers from adherence of algae, barnacles, and clams and formation of biofilms on the sensor surface, which strongly influences the diffusion of oxygen into the sensor film. Metabolism of these adhered species consumes oxygen and causes bias on sensor readout. Therefore, commercial sensors are equipped with mechanical brushes to constantly clean the sensor surface, which significantly complicates the sensor design and causes damage to the sensor surface. In addition, extra energy storage and mechanical structures are required, which make an optical sensor bulky and limit its service life. We have developed a robust and highly sensitive dissolved oxygen sensor with good mechanical stability and self-cleaning capability. The sensor was fabricated by doping oxygen-sensitive probe PtTFPP with superhydrophobic coating. The 3 to 5 nm micro/nanostructures formed from silica sol were solidified with silicone resin, which endowed the sensor film with excellent mechanical stability. The sensor film exhibits antifouling, antiabrasion, and self-cleaning properties. There is no need of mechanical brushes to clean sensor surfaces, which greatly simplifies the sensor design. Owing to the porous structure, the sensor shows high quenchability, with I 0/I 100 of 77. All these features guarantee that the sensor could be used in harsh and dirty conditions for long-term monitoring of dissolved oxygen concentration.

| S-EPMC6648469 | biostudies-literature

Aerobic growth at nanomolar oxygen concentrations.

Project description:Molecular oxygen (O(2)) is the second most abundant gas in the Earth's atmosphere, but in many natural environments, its concentration is reduced to low or even undetectable levels. Although low-oxygen-adapted organisms define the ecology of low-oxygen environments, their capabilities are not fully known. These capabilities also provide a framework for reconstructing a critical period in the history of life, because low, but not negligible, atmospheric oxygen levels could have persisted before the "Great Oxidation" of the Earth's surface about 2.3 to 2.4 billion years ago. Here, we show that Escherichia coli K-12, chosen for its well-understood biochemistry, rapid growth rate, and low-oxygen-affinity terminal oxidase, grows at oxygen levels of ≤ 3 nM, two to three orders of magnitude lower than previously observed for aerobes. Our study expands both the environmental range and temporal history of aerobic organisms.

| S-EPMC2973883 | biostudies-literature

Upcycling Waste: Citrus limon Peel-Derived Carbon Quantum Dots for Sensitive Detection of Tetracycline in the Nanomolar Range

Project description: Not available

| S-EPMC10552100 | biostudies-literature

Ammonium and nitrite oxidation at nanomolar oxygen concentrations in oxygen minimum zone waters.

Project description:A major percentage of fixed nitrogen (N) loss in the oceans occurs within nitrite-rich oxygen minimum zones (OMZs) via denitrification and anammox. It remains unclear to what extent ammonium and nitrite oxidation co-occur, either supplying or competing for substrates involved in nitrogen loss in the OMZ core. Assessment of the oxygen (O2) sensitivity of these processes down to the O2 concentrations present in the OMZ core (<10 nmol⋅L(-1)) is therefore essential for understanding and modeling nitrogen loss in OMZs. We determined rates of ammonium and nitrite oxidation in the seasonal OMZ off Concepcion, Chile at manipulated O2 levels between 5 nmol⋅L(-1) and 20 μmol⋅L(-1) Rates of both processes were detectable in the low nanomolar range (5-33 nmol⋅L(-1) O2), but demonstrated a strong dependence on O2 concentrations with apparent half-saturation constants (Kms) of 333 ± 130 nmol⋅L(-1) O2 for ammonium oxidation and 778 ± 168 nmol⋅L(-1) O2 for nitrite oxidation assuming one-component Michaelis-Menten kinetics. Nitrite oxidation rates, however, were better described with a two-component Michaelis-Menten model, indicating a high-affinity component with a Km of just a few nanomolar. As the communities of ammonium and nitrite oxidizers were similar to other OMZs, these kinetics should apply across OMZ systems. The high O2 affinities imply that ammonium and nitrite oxidation can occur within the OMZ core whenever O2 is supplied, for example, by episodic intrusions. These processes therefore compete with anammox and denitrification for ammonium and nitrite, thereby exerting an important control over nitrogen loss.

| S-EPMC5035861 | biostudies-literature

Polymer-free optode nanosensors for dynamic, reversible, and ratiometric sodium imaging in the physiological range.

Project description:This work introduces a polymer-free optode nanosensor for ratiometric sodium imaging. Transmembrane ion dynamics are often captured by electrophysiology and calcium imaging, but sodium dyes suffer from short excitation wavelengths and poor selectivity. Optodes, optical sensors composed of a polymer matrix with embedded sensing chemistry, have been translated into nanosensors that selectively image ion concentrations. Polymer-free nanosensors were fabricated by emulsification and were stable by diameter and sensitivity for at least one week. Ratiometric fluorescent measurements demonstrated that the nanosensors are selective for sodium over potassium by ~1.4 orders of magnitude, have a dynamic range centered at 20 mM, and are fully reversible. The ratiometric signal changes by 70% between 10 and 100 mM sodium, showing that they are sensitive to changes in sodium concentration. These nanosensors will provide a new tool for sensitive and quantitative ion imaging.

| S-EPMC3842545 | biostudies-literature

Biological oxygen demand optode analysis of coral reef-associated microbial communities exposed to algal exudates.

Project description:Algae-derived dissolved organic matter has been hypothesized to induce mortality of reef building corals. One proposed killing mechanism is a zone of hypoxia created by rapidly growing microbes. To investigate this hypothesis, biological oxygen demand (BOD) optodes were used to quantify the change in oxygen concentrations of microbial communities following exposure to exudates generated by turf algae and crustose coralline algae (CCA). BOD optodes were embedded with microbial communities cultured from Montastraea annularis and Mussismilia hispida, and respiration was measured during exposure to turf and CCA exudates. The oxygen concentrations along the optodes were visualized with a low-cost Submersible Oxygen Optode Recorder (SOOpR) system. With this system we observed that exposure to exudates derived from turf algae stimulated higher oxygen drawdown by the coral-associated bacteria than CCA exudates or seawater controls. Furthermore, in both turf and CCA exudate treatments, all microbial communities (coral-, algae-associated and pelagic) contributed significantly to the observed oxygen drawdown. This suggests that the driving factor for elevated oxygen consumption rates is the source of exudates rather than the initially introduced microbial community. Our results demonstrate that exudates from turf algae may contribute to hypoxia-induced coral stress in two different coral genera as a result of increased biological oxygen demand of the local microbial community. Additionally, the SOOpR system developed here can be applied to measure the BOD of any culturable microbe or microbial community.

| S-EPMC3719127 | biostudies-literature

The Reduction of Dissolved Oxygen During Magnesium Corrosion.

Project description:The consumption of dissolved oxygen (DO) during the corrosion of commercially pure magnesium specimens was investigated by localized corrosion techniques. The concentration of oxygen and the local current density on the near-surface of magnesium were measured simultaneously by a micro-optode DO sensor and the scanning vibrating electrode technique (SVET), respectively. Diamond microelectrodes were also used for DO mapping. Significant DO depletion was found since the initial immersion time of Mg in NaCl 0.5?m, and a correlation could be established between DO consumption and areas of anodic and cathodic activity. These findings assume particular relevance for the corrosion of Mg alloys or magnesium components with impurity levels higher than the tolerance limit. Moreover, this study points out the significance of the partial oxygen pressure as an influential parameter during magnesium corrosion.

| S-EPMC6115706 | biostudies-literature

Modeling hypolimnetic dissolved oxygen depletion using monitoring data.

Project description:Eutrophication increases hypoxia in lakes and reservoirs, causing deleterious effects on biological communities. Quantitative models would help managers develop effective strategies to address hypoxia issues, but most existing models are limited in their applicability to lakes with temporally resolved dissolved oxygen data. We describe a hierarchical Bayesian model that predicts dissolved oxygen in lakes based on a mechanistic understanding of the factors that influence the development of hypoxia during summer stratification. These factors include the days elapsed since stratification, dissolved organic carbon concentration, lake depth, and chlorophyll concentration. We demonstrate that the model can be fit to two datasets: one in which temporally resolved dissolved oxygen profiles were collected from 20 lakes in a single state and one in which single profiles were collected from 381 lakes across the United States. Analyses of these two datasets yielded similar relationships between volumetric oxygen demand and chlorophyll concentration, suggesting that the model structure appropriately represented the effects of eutrophication on oxygen depletion. Combining both datasets in a single model further improved the precision of predictions.

| S-EPMC7252502 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data