Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Novel nitrogen doped graphene sponge with ultrahigh capacitive deionization performance.

ABSTRACT: As water shortage has become a serious global problem, capacitive deionization (CDI) with high energy efficiency and low cost, is considered as a promising desalination technique to solve this problem. To date, CDI electrodes are mainly made up of porous carbon materials. However, the electrosorption performance obtained by now still cannot meet the demand of practical application. Therefore, a rationally designed structure of electrode materials has been an urgent need for CDI application. Here, a novel nitrogen-doped graphene sponge (NGS), with high specific surface area and rationally designed structure was fabricated, and used as CDI electrodes for the first time. The results show that NGS exhibits an ultrahigh electrosorption capacity of 21.0 mg g(-1) in ? 500 mg L(-1) NaCl solution, and to our knowledge, it is the highest value reported for carbon electrodes in similar experimental conditions by now. NGS in this work is expected to be a promising candidate as CDI electrode material.

SUBMITTER: Xu X

PROVIDER: S-EPMC4463025 | biostudies-literature | 2015 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Novel nitrogen doped graphene sponge with ultrahigh capacitive deionization performance.

Xu Xingtao X Sun Zhuo Z Chua Daniel H C DH Pan Likun L

Scientific reports 20150611

As water shortage has become a serious global problem, capacitive deionization (CDI) with high energy efficiency and low cost, is considered as a promising desalination technique to solve this problem. To date, CDI electrodes are mainly made up of porous carbon materials. However, the electrosorption performance obtained by now still cannot meet the demand of practical application. Therefore, a rationally designed structure of electrode materials has been an urgent need for CDI application. Here ...[more]

PMID: 26063676

Similar Datasets

Facile synthesis of novel graphene sponge for high performance capacitive deionization.

Project description:Capacitive deionization (CDI) is an effective desalination technique offering an appropriate route to obtain clean water. In order to obtain excellent CDI performance, a rationally designed structure of electrode materials has been an urgent need for CDI application. In this work, a novel graphene sponge (GS) was proposed as CDI electrode for the first time. The GS was fabricated via directly freeze-drying graphene oxide solution followed by annealing in nitrogen atmosphere. The morphology, structure and electrochemical performance of GS were characterized by scanning electron microscopy, Raman spectroscopy, nitrogen adsorption-desorption, X-ray photoelectron spectroscopy, cyclic voltammetry and electrochemical impedance spectroscopy. The electrosorption performance of GS in NaCl solution was studied and compared with pristine graphene (PG). The results show that due to the unique 3D interconnected porous structure, large accessible surface area and low charge transfer resistance, GS electrode exhibits an ultrahigh electrosorption capacity of 14.9 mg g(-1) when the initial NaCl concentration is ~500 mg L(-1), which is about 3.2 times of that of PG (4.64 mg g(-1)), and to our knowledge, it should be the highest value reported for graphene electrodes in similar experimental conditions by now. These results indicate that GS should be a promising candidate for CDI electrode.

| S-EPMC4327409 | biostudies-literature

Ultrahigh Performance of Novel Capacitive Deionization Electrodes based on A Three-Dimensional Graphene Architecture with Nanopores.

Project description:In order to achieve optimal desalination during capacitive deionization (CDI), CDI electrodes should possess high electrical conductivity, large surface area, good wettability to water, narrow pore size distribution and efficient pathways for ion and electron transportation. In this work, we fabricated a novel CDI electrode based on a three-dimensional graphene (3DG) architecture by constructing interconnected graphene sheets with in-plane nanopores (NP-3DG). As compared to 3DG, NP-3DG features a larger specific surface area of 445 m(2) g(-1) and therefore the higher specific capacitance. The ultrahigh electrosorptive capacity of NP-3DG predicted from Langmuir isotherm is 17.1 mg g(-1) at a cell potential of 1.6 V. This can be attributed to the interconnected macropores within the graphene networks and nanopores on graphene sheets. Both of macropores and nanopores are favorable for enhancing CDI performance by buffering ions to reduce the diffusion distances from the external electrolyte to the interior surfaces and enlarging the surface area.

| S-EPMC4700447 | biostudies-literature

Microwave-Assisted Synthesis of Highly-Crumpled, Few-Layered Graphene and Nitrogen-Doped Graphene for Use as High-Performance Electrodes in Capacitive Deionization.

Project description:Capacitive deionization (CDI) is a promising procedure for removing various charged ionic species from brackish water. The performance of graphene-based material in capacitive deionization is lower than the expectation of the industry, so highly-crumpled, few-layered graphene (HCG) and highly-crumpled nitrogen-doped graphene (HCNDG) with high surface area have been introduced as promising candidates for CDI electrodes. Thus, HCG and HCNDG were prepared by exfoliation of graphite in the presence of liquid-phase, microwave-assisted methods. An industrially-scalable, cost-effective, and simple approach was employed to synthesize HCG and HCNDG, resulting in few-layered graphene and nitrogen-doped graphene with large specific surface area. Then, HCG and HCNDG were utilized for manufacturing a new class of carbon nanostructure-based electrodes for use in large-scale CDI equipment. The electrosorption results indicated that both the HCG and HCNDG have fairly large specific surface areas, indicating their huge potential for capacitive deionization applications.

| S-EPMC4672334 | biostudies-literature

Graphene-carbon 2D heterostructures with hierarchically-porous P,N-doped layered architecture for capacitive deionization.

Project description:Exploring a new-family of carbon-based desalinators to optimize their performances beyond the current commercial benchmark is of significance for the development of practically useful capacitive deionization (CDI) materials. Here, we have fabricated a hierarchically porous N,P-doped carbon-graphene 2D heterostructure (denoted NPC/rGO) by using metal-organic framework (MOF)-nanoparticle-driven assembly on graphene oxide (GO) nanosheets followed by stepwise pyrolysis and phosphorization procedures. The resulting NPC/rGO-based CDI desalinator exhibits ultrahigh deionization performance with a salt adsorption capacity of 39.34 mg g-1 in a 1000 mg L-1 NaCl solution at 1.2 V over 30 min with good cycling stability over 50 cycles. The excellent performance is attributed to the high specific surface area, high conductivity, favorable meso-/microporous structure together with nitrogen and phosphorus heteroatom co-doping, all of which are beneficial for the accommodation of ions and charge transport during the CDI process. More importantly, NPC/rGO exhibits a state-of-the-art CDI performance compared to the commercial benchmark and most of the previously reported carbon materials, highlighting the significance of the MOF nanoparticle-driven assembly strategy and graphene-carbon 2D heterostructures for CDI applications.

| S-EPMC8336432 | biostudies-literature

Activated Carbon Blended with Reduced Graphene Oxide Nanoflakes for Capacitive Deionization.

Project description:Capacitive deionization is a second-generation water desalination technology in which porous electrodes (activated carbon materials) are used to temporarily store ions. In this technology, porous carbon used as electrodes have inherent limitations, such as low electrical conductivity, low capacitance, etc., and, as such, optimization of electrode materials by rational design to obtain hybrid electrodes is key towards improvement in desalination performance. In this work, different compositions of mixture of reduced graphene oxide (RGO) and activated carbon (from 5 to 20 wt% RGO) have been prepared and tested as electrodes for brackish water desalination. The physico-chemical and electrochemical properties of the activated carbon (AC), reduced graphene oxide (RGO), and as-prepared electrodes (AC/RGO-x) were characterized by low-temperature nitrogen adsorption measurement, scanning electron microscope (SEM), X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), Fourier transform infra-red (FT-IR), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). Among all the composite electrodes, AC/RGO-5 (RGO at 5 wt%) possessed the highest specific capacitance (74 F g-1) and the highest maximum salt adsorption capacity (mSAC) of 8.10 mg g-1 at an operating voltage ∆E = 1.4 V. This shows that this simple approach could offer a potential way of fabricating electrodes of accentuated carbon network of an improved electronic conductivity that's much coveted in CDI technology.

| S-EPMC8144981 | biostudies-literature

Ultrahigh capacitive performance from both Co(OH)?/graphene electrode and K?Fe(CN)? electrolyte.

Project description:Pseudocapacitance is commonly associated to the reversible redox reactions from electrode materials, but the enhancement in pseudocapacitance that only relies on electrode materials is limited. Here, we explore the possibility of enhancing pseudocapacitance through both Co(OH)?/graphene nanosheets (GNS) electrode and K?Fe(CN)? electrolyte. With a good conductivity and favoring electron transfer, GNS are hybridized with Co(OH)? to improve the pseudocapacitance of Co(OH)?, including enhancing its rate capability and electrochemical stability. Adding K?Fe(CN)? into KOH electrolyte further enhances the pseudocapacitance via both directly contributing pseudocapacitance to Co(OH)?/GNS and promoting the electron gain and loss of Co ions. This novel Co(OH)?/GNS-K?Fe(CN)?/KOH electrode system shows an ultrahigh specific capacitance of 7514?Fg?¹ at 16?Ag?¹ in mixed 1?M KOH and 0.08?M K?Fe(CN)?, more than 100% coulombic efficiency, and long-term cycling stability (the capacitance retention is 75% after 20000 continuous charge-discharge cycles in mixed 1?M KOH and 0.04?M K?Fe(CN)?.

| S-EPMC3798881 | biostudies-other

3D nitrogen-doped graphene foam with encapsulated germanium/nitrogen-doped graphene yolk-shell nanoarchitecture for high-performance flexible Li-ion battery.

Project description:Flexible electrochemical energy storage devices have attracted extensive attention as promising power sources for the ever-growing field of flexible and wearable electronic products. However, the rational design of a novel electrode structure with a good flexibility, high capacity, fast charge-discharge rate and long cycling lifetimes remains a long-standing challenge for developing next-generation flexible energy-storage materials. Herein, we develop a facile and general approach to three-dimensional (3D) interconnected porous nitrogen-doped graphene foam with encapsulated Ge quantum dot/nitrogen-doped graphene yolk-shell nano architecture for high specific reversible capacity (1,220?mAh?g-1), long cycling capability (over 96% reversible capacity retention from the second to 1,000 cycles) and ultra-high rate performance (over 800?mAh?g-1 at 40 C). This work paves a way to develop the 3D interconnected graphene-based high-capacity electrode material systems, particularly those that suffer from huge volume expansion, for the future development of high-performance flexible energy storage systems.

| S-EPMC5216101 | biostudies-literature

Construction of a Novel Three-Dimensional PEDOT/RVC Electrode Structure for Capacitive Deionization: Testing and Performance.

Project description:This article discusses the deposition of different amount of microstuctured poly(3,4-ethylenedioxythiophene) (PEDOT) on reticulated vitreous carbon (RVC) by electrochemical method to prepare three-dimensional (3D) PEDOT/RVC electrodes aimed to be used in capacitive deionization (CDI) technology. A CDI unit cell has been constructed here in this study. The performance of CDI cell in the ion removal of NaCl onto the sites of PEDOT/RVC electrode has been systematically investigated in terms of flow-rate, applied electrical voltage, and increasing PEDOT loading on PEDOT/RVC electrodes. It is observed that the increase in flow-rate, electric voltage, and PEDOT loading up to a certain level improve the ion removal performance of electrode in the CDI cell. The result shows that these electrodes can be used effectively for desalination technology, as the electrosorption capacity/desalination performance of these electrodes is quite high compared to carbon materials. Moreover, the stability of the electrodes has been tested and it is reported that these electrodes are regenerative. The effect of increasing NaCl concentration on the electrosorption capacity has also been investigated for these electrodes. Finally, it has been shown that 1 m³ PEDOT-120 min/RVC electrodes from 75 mg/L NaCl feed solution produce 421, 978 L water per day of 20 mg/L NaCl final concentration.

| S-EPMC5551889 | biostudies-other

Plasma-induced, nitrogen-doped graphene-based aerogels for high-performance supercapacitors.

Project description:Commonly used energy storage devices include stacked layers of active materials on two-dimensional sheets, and the limited specific surface area restricts the further development of energy storage. Three-dimensional (3D) structures with high specific surface areas would improve device performance. Herein, we present a novel procedure to fabricate macroscopic, high-quality, nitrogen-doped, 3D graphene/nanoparticle aerogels. The procedure includes vacuum filtration, freeze-drying, and plasma treatment, which can be further expanded for large-scale production of nitrogen-doped, graphene-based aerogels. The behavior of the supercapacitor is investigated using a typical nitrogen-doped graphene/Fe3O4 nanoparticle 3D structure (NG/Fe3O4). Compared with 3D graphene/Fe3O4 structures prepared by the traditional hydrothermal method, the NG/Fe3O4 supercapacitor prepared by the present method has a 153% improvement in specific capacitance, and there is no obvious decrease in specific capacitance after 1000 cycles. The present work provides a new and facile method to produce large-scale, 3D, graphene-based materials with high specific capacitance for energy storage.

| S-EPMC6059830 | biostudies-literature

High-Performance Membrane Capacitive Deionization Based on Metal-Organic Framework-Derived Hierarchical Carbon Structures.

Project description:Membrane capacitive deionization (MCDI) is a simple and highly energy efficient method to convert brackish water to clean water. In this work, a high-performance MCDI electrode architecture, which is composed of three-dimensional graphene networks and metal-organic frameworks (MOFs)-derived porous carbon rods, was prepared by a facile method. The obtained electrode material possesses not only the conducting networks for rapid electron transport but also the short diffusion length of ions, which exhibits excellent desalination performance with a high salt removal capacity, i.e., 37.6 mg g-1 at 1.2 V in 1000 mg L-1 NaCl solution. This strategy can be extended to other MOF-derived MCDI electrodes.

| S-EPMC6644619 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data