Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

One-step femtosecond laser patterning of light-trapping structure on dye-sensitized solar cell photoelectrodes†.

ABSTRACT: Light-trapping patterns were constructed in TiO2 photoelectrodes for dye-sensitized solar cells (DSSCs) by a one-step femtosecond laser structuring method that utilized ablation to create patterns at the surface of nanostructured TiO2 films. As a result, much more light was trapped in the photoelectrodes. Grating and orthogonal-grid patterns were studied, and the light trapping performance was optimized through the adjustment of pattern spacing, which was easily realized in the laser ablation process. With a 5-?m-spacing orthogonal-grid pattern, DSSCs showed a highest photon-to-electron conversion efficiency of 9.32% under AM 1.5G, a 13.5% improvement compared to the same cell without laser ablation. This simple and universal laser ablation method could be used to process many kinds of nanomaterials, and could be applied for various devices with nanostructures.

SUBMITTER: Zhang X

PROVIDER: S-EPMC4476548 | biostudies-literature | 2015 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

One-step femtosecond laser patterning of light-trapping structure on dye-sensitized solar cell photoelectrodes†.

Zhang Xi X Liu Hewei H Huang Xuezhen X Jiang Hongrui H

Journal of materials chemistry. C 20150401 14

Light-trapping patterns were constructed in TiO2 photoelectrodes for dye-sensitized solar cells (DSSCs) by a one-step femtosecond laser structuring method that utilized ablation to create patterns at the surface of nanostructured TiO2 films. As a result, much more light was trapped in the photoelectrodes. Grating and orthogonal-grid patterns were studied, and the light trapping performance was optimized through the adjustment of pattern spacing, which was easily realized in ...[more]

PMID: 26113977

Similar Datasets

Sol-Gel Processed TiO2 Nanotube Photoelectrodes for Dye-Sensitized Solar Cells with Enhanced Photovoltaic Performance.

Project description:The performance of dye-sensitized solar cells (DSCs) critically depends on the efficiency of electron transport within the TiO2-dye-electrolyte interface. To improve the efficiency of the electron transfer the conventional structure of the working electrode (WE) based on TiO2 nanoparticles (NPs) was replaced with TiO2 nanotubes (NTs). Sol-gel method was used to prepare undoped and Nb-doped TiO2 NPs and TiO2 NTs. The crystallinity and morphology of the WEs were characterized using XRD, SEM and TEM techniques. XPS and PL measurements revealed a higher concentration of oxygen-related defects at the surface of NPs-based electrodes compared to that based on NTs. Replacement of the conventional NPs-based TiO2 WE with alternative led to a 15% increase in power conversion efficiency (PCE) of the DSCs. The effect is attributed to the more efficient transfer of charge carriers in the NTs-based electrodes due to lower defect concentration. The suggestion was confirmed experimentally by electrical impedance spectroscopy measurements when we observed the higher recombination resistance at the TiO2 NTs-electrolyte interface compared to that at the TiO2 NPs-electrolyte interface. Moreover, Nb-doping of the TiO2 structures yields an additional 14% PCE increase. The application of Nb-doped TiO2 NTs as photo-electrode enables the fabrication of a DSC with an efficiency of 8.1%, which is 35% higher than that of a cell using a TiO2 NPs. Finally, NTs-based DSCs have demonstrated a 65% increase in the PCE value, when light intensity was decreased from 1000 to 10 W/m2 making such kind device be promising alternative indoor PV applications when the intensity of incident light is low.

| S-EPMC7075133 | biostudies-literature

Photovoltaic Effects of Dye-Sensitized Solar Cells Using Double-Layered TiO2 Photoelectrodes and Pyrazine-Based Photosensitizers.

Project description:In this study, to obtain high performances of the dye-sensitized solar cells using the optimal TiO2 photoelectrode for the synthesized pyrazine-based organic photosensitizers, three types of TiO2 photoelectrodes were fabricated and evaluated for comparison. The double-layered nanoporous TiO2 photoelectrode (SPD type) consisted of a dispersed TiO2 layer and a transparent TiO2 layer. The single-layered nanoporous TiO2 photoelectrodes (D type and SP type) consisted of a dispersed TiO2 layer and a transparent TiO2 layer, respectively. The surface area, pore volume, and crystalline structures of the three types of TiO2 photoelectrodes were analyzed by Brunauer-Emmett-Teller method, field-emission scanning electron microscopy, and X-ray diffractometry to confirm their crystallinity and surface morphology. The structures of the three types of TiO2 photoelectrode-adsorbed organic sensitizers were investigated using X-ray photoelectron spectroscopy. The photovoltaic performances of DSSC devices using three organic photosensitizers adsorbed onto the three types of TiO2 photoelectrodes were investigated under a light intensity of 100 mW/cm2 at AM 1.5. The DSSC device using double-layered SPD type TiO2 photoelectrodes displayed 1.31∼2.64% efficiency, compared to single-layered SP type TiO2 photoelectrodes (1.31∼2.50%) and D type TiO2 photoelectrodes (0.90∼1.54%), using organic photosensitizers. The DSSC device using the SPD type TiO2 photoelectrode and trifluoromethylbenzopyrazine (TPPF) as a photosensitizer showed the highest performances: J sc of 5.69 mA/cm2, V oc of 0.69 V, FF of 0.67, and efficiency of 2.64%. The relationship between photovoltaic effects and interfacial resistance characteristics of DSSCs using the three organic photosensitizers adsorbed onto the three types of TiO2 photoelectrodes could be interpreted from interfacial resistances according to frequency through impedance analysis.

| S-EPMC10134224 | biostudies-literature

The dye-sensitized solar cell database.

Project description:BackgroundDye-sensitized solar cells (DSSCs) have garnered a lot of attention in recent years. The solar energy to power conversion efficiency of a DSSC is influenced by various components of the cell such as the dye, electrolyte, electrodes and additives among others leading to varying experimental configurations. A large number of metal-based and metal-free dye sensitizers have now been reported and tools using such data to indicate new directions for design and development are on the rise.DescriptionDSSCDB, the first of its kind dye-sensitized solar cell database, aims to provide users with up-to-date information from publications on the molecular structures of the dyes, experimental details and reported measurements (efficiencies and spectral properties) and thereby facilitate a comprehensive and critical evaluation of the data. Currently, the DSSCDB contains over 4000 experimental observations spanning multiple dye classes such as triphenylamines, carbazoles, coumarins, phenothiazines, ruthenium and porphyrins.ConclusionThe DSSCDB offers a web-based, comprehensive source of property data for dye sensitized solar cells. Access to the database is available through the following URL: www.dyedb.com .

| S-EPMC5882482 | biostudies-literature

Ultrafast charge separation dynamics in opaque, operational dye-sensitized solar cells revealed by femtosecond diffuse reflectance spectroscopy.

Project description:Efficient dye-sensitized solar cells are based on highly diffusive mesoscopic layers that render these devices opaque and unsuitable for ultrafast transient absorption spectroscopy measurements in transmission mode. We developed a novel sub-200 femtosecond time-resolved diffuse reflectance spectroscopy scheme combined with potentiostatic control to study various solar cells in fully operational condition. We studied performance optimized devices based on liquid redox electrolytes and opaque TiO2 films, as well as other morphologies, such as TiO2 fibers and nanotubes. Charge injection from the Z907 dye in all TiO2 morphologies was observed to take place in the sub-200 fs time scale. The kinetics of electron-hole back recombination has features in the picosecond to nanosecond time scale. This observation is significantly different from what was reported in the literature where the electron-hole back recombination for transparent films of small particles is generally accepted to occur on a longer time scale of microseconds. The kinetics of the ultrafast electron injection remained unchanged for voltages between +500 mV and -690 mV, where the injection yield eventually drops steeply. The primary charge separation in Y123 organic dye based devices was clearly slower occurring in two picoseconds and no kinetic component on the shorter femtosecond time scale was recorded.

| S-EPMC4837338 | biostudies-literature

Pulsed Laser Fabrication of TiO2 Buffer Layers for Dye Sensitized Solar Cells.

Project description:We report on the fabrication of dye-sensitized solar cells with a TiO2 buffer layer between the transparent conductive oxide substrate and the mesoporous TiO2 film, in order to improve the photovoltaic conversion efficiency of the device. The buffer layer was fabricated by pulsed laser deposition whereas the mesoporous film by the doctor blade method, using TiO2 paste obtained by the sol-gel technique. The buffer layer was deposited in either oxygen (10 Pa and 50 Pa) or argon (10 Pa and 50 Pa) onto transparent conducting oxide glass kept at room temperature. The cross-section scanning electron microscopy image showed differences in layer morphology and thickness, depending on the deposition conditions. Transmission electron microscopy studies of the TiO2 buffer layers indicated that films consisted of grains with typical diameters of 10 nm to 30 nm. We found that the photovoltaic conversion efficiencies, determined under standard air mass 1.5 global (AM 1.5G) conditions, of the solar cells with a buffer layer are more than two times larger than those of the standard cells. The best performance was reached for buffer layers deposited at 10 Pa O2. We discuss the processes that take place in the device and emphasize the role of the brush-like buffer layer in the performance increase.

| S-EPMC6566938 | biostudies-literature

Supramolecular Hemicage Cobalt Mediators for Dye-Sensitized Solar Cells.

Project description:A new class of dye-sensitized solar cells (DSSCs) using the hemicage cobalt-based mediator [Co(ttb)]2+/3+ with the highly preorganized hexadentate ligand 5,5'',5''''-((2,4,6-triethyl benzene-1,3,5-triyl)tris(ethane-2,1-diyl))tri-2,2'-bipyridine (ttb) has been fully investigated. The performances of DSSCs sensitized with organic D-?-A dyes utilizing either [Co(ttb)]2+/3+ or the conventional [Co(bpy)3 ]2+/3+ (bpy=2,2'-bipyridine) redox mediator are comparable under 1000?W?m-2 AM 1.5?G illumination. However, the hemicage complexes exhibit exceptional stability under thermal and light stress. In particular, a 120-hour continuous light illumination stability test for DSSCs using [Co(ttb)]2+/3+ resulted in a 10?% increase in the performance, whereas a 40?% decrease in performance was found for [Co(bpy)3 ]2+/3+ electrolyte-based DSSCs under the same conditions. These results demonstrate the great promise of [Co(ttb)]2+/3+ complexes as redox mediators for efficient, cost-effective, large-scale DSSC devices.

| S-EPMC5305181 | biostudies-literature

Highly stable tandem solar cell monolithically integrating dye-sensitized and CIGS solar cells.

Project description:UnlabelledA highly stable monolithic tandem solar cell was developed by combining the heterogeneous photovoltaic technologies of dye-sensitized solar cell (DSSC) and solution-processed CuInxGa1-xSeyS1-y (CIGS) thin film solar cells. The durability of the tandem cell was dramatically enhanced by replacing the redox couple from to [Co(bpy)3](2+) /[Co(bpy)3](3+)), accompanied by a well-matched counter electrode (PedotPSS) and sensitizer (Y123). A 1000?h durability test of the DSSC/CIGS tandem solar cell in ambient conditions resulted in only a 5% decrease in solar cell efficiency. Based on electrochemical impedance spectroscopy and photoelectrochemical cell measurement, the enhanced stability of the tandem cell is attributed to minimal corrosion by the cobalt-based polypyridine complex redox couple.

| S-EPMC4973243 | biostudies-literature

Dye molecules in electrolytes: new approach for suppression of dye-desorption in dye-sensitized solar cells

Project description:The widespread commercialization of dye-sensitized solar cells remains limited because of the poor long-term stability. We report on the influence of dye-molecules added in liquid electrolyte on long-term stability of dye-sensitized solar cells. Dye-desorption from the TiO2 surface during long-term cycling is one of the decisive factors that degrade photocurrent densities of devices which in turn determine the efficiencies of the devices. For the first time, desorption of dye from the TiO2 surface could be suppressed by controlling thermodynamic equilibrium; by addition of dye molecules in the electrolyte. The dye molecules in the electrolyte can suppress the driving forces for the adsorbed dye molecules to be desorbed from TiO2 nanoparticles. As a result, highly enhanced device stabilities were achieved due to the reduction of dye-desorption although there was a little decrease in the initial efficiencies.

| S-EPMC3634105 | biostudies-literature

Fabrication, Optimization and Characterization of Natural Dye Sensitized Solar Cell.

Project description:The dyes extracted from pomegranate and berry fruits were successfully used in the fabrication of natural dye sensitized solar cells (NDSSC). The morphology, porosity, surface roughness, thickness, absorption and emission characteristics of the pomegranate dye sensitized photo-anode were studied using various analytical techniques including FESEM, EDS, TEM, AFM, FTIR, Raman, Fluorescence and Absorption Spectroscopy. Pomegranate dye extract has been shown to contain anthocyanin which is an excellent light harvesting pigment needed for the generation of charge carriers for the production of electricity. The solar cell's photovoltic performance in terms of efficiency, voltage, and current was tested with a standard illumination of air-mass 1.5 global (AM 1.5?G) having an irradiance of 100?mW/cm2. After optimization of the photo-anode and counter electrode, a photoelectric conversion efficiency (?) of 2%, an open-circuit voltage (Voc) of 0.39?mV, and a short-circuit current density (Isc) of 12.2?mA/cm2 were obtained. Impedance determination showed a relatively low charge-transfer resistance (17.44??) and a long lifetime, signifying a reduction in recombination losses. The relatively enhanced efficiency is attributable in part to the use of a highly concentrated pomegranate dye, graphite counter electrode and TiCl4 treatment of the photo-anode.

| S-EPMC5270247 | biostudies-literature

Photovoltaic Performance of Dye-Sensitized Solar Cells Containing ZnO Microrods.

Project description:At an elevated temperature of 90 °C, a chemical bath deposition using an aqueous solution of Zn(NO3)2·6H2O and (CH2)6N4 resulted in the formation of both nanoflowers and microrods of ZnO on F-doped SnO2 glass with a seed layer. The nanoflowers and microrods were sensitized with dyes for application to the photoelectrodes of dye-sensitized solar cells (DSSCs). By extending the growth time of ZnO, the formation of nanoflowers was reduced and the formation of microrods favored. As the growth time was increased from 4 to 6 and then to 8 h, the open circuit voltage (Voc) values of the DSSCs were increased, whilst the short circuit current (Jsc) values varied only slightly. Changes in the dye-loading amount, dark current, and electrochemical impedance were monitored and they revealed that the increase in Voc was found to be due to a retardation of the charge recombination between photoinjected electrons and I3- ions and resulted from a reduction in the surface area of ZnO microrods. A reduced surface area decreased the dye contents adsorbed on the ZnO microrods, and thereby decreased the light harvesting efficiency (LHE). An increase in the electron collection efficiency attributed to the suppressed charge recombination counteracted the decreased LHE, resulting in comparable Jsc values regardless of the growth time.

| S-EPMC6956303 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data