Tuning the isoelectric point of graphene by electrochemical functionalization.
Ontology highlight
ABSTRACT:
SUBMITTER: Zuccaro L
PROVIDER: S-EPMC4488746 | biostudies-literature | 2015 Jul
REPOSITORIES: biostudies-literature
Publications
Tuning the isoelectric point of graphene by electrochemical functionalization.
Zuccaro Laura L Krieg Janina J Desideri Alessandro A Kern Klaus K Balasubramanian Kannan K
Scientific reports 20150702
The ability to control the charge-potential landscape at solid-liquid interfaces is pivotal to engineer novel devices for applications in sensing, catalysis and energy conversion. The isoelectric point (pI)/point of zero charge (pzc) of graphene plays a key role in a number of physico-chemical phenomena occurring at the graphene-liquid interface. Supported by theory, we present here a methodology to identify the pI/pzc of (functionalized) graphene, which also allows for estimating the nature and ...[more]
Similar Datasets
Project description:We present a versatile and simple method using electrochemistry for the exclusive functionalization of the edge of a graphene monolayer with metal nanoparticles or polymeric amino groups. The attachment of metal nanoparticles allows us to exploit surface-enhanced Raman scattering to characterize the chemistry of both the pristine and the functionalized graphene edge. For the pristine patterned graphene edge, we observe the typical edge-related modes, while for the functionalized graphene edge we identify the chemical structure of the functional layer by vibrational fingerprinting. The ability to obtain single selectively functionalized graphene edges routinely on an insulating substrate opens an avenue for exploring the effect of edge chemistry on graphene properties systematically.
| S-EPMC6346287 | biostudies-literature
Project description:Proteome-pI is an online database containing information about predicted isoelectric points for 5029 proteomes calculated using 18 methods. The isoelectric point, the pH at which a particular molecule carries no net electrical charge, is an important parameter for many analytical biochemistry and proteomics techniques, especially for 2D gel electrophoresis (2D-PAGE), capillary isoelectric focusing, liquid chromatography-mass spectrometry and X-ray protein crystallography. The database, available at http://isoelectricpointdb.org allows the retrieval of virtual 2D-PAGE plots and the development of customised fractions of proteome based on isoelectric point and molecular weight. Moreover, Proteome-pI facilitates statistical comparisons of the various prediction methods as well as biological investigation of protein isoelectric point space in all kingdoms of life. For instance, using Proteome-pI data, it is clear that Eukaryotes, which evolved tight control of homeostasis, encode proteins with pI values near the cell pH. In contrast, Archaea living frequently in extreme environments can possess proteins with a wide range of isoelectric points. The database includes various statistics and tools for interactive browsing, searching and sorting. Apart from data for individual proteomes, datasets corresponding to major protein databases such as UniProtKB/TrEMBL and the NCBI non-redundant (nr) database have also been precalculated and made available in CSV format.
| S-EPMC5210655 | biostudies-literature
Project description:Engineered solid-liquid interfaces will play an important role in the development of future energy storage and conversion (ESC) devices. In the present study, defective graphene oxide (GO) and reduced graphene oxide (rGO) structures were used as engineered interfaces to tune the selectivity and activity of Pt disk electrodes. GO was deposited on Pt electrodes via the Langmuir-Blodgett technique, which provided compact and uniform GO films, and these films were subsequently converted to rGO by thermal reduction. Electrochemical measurements revealed that both GO and rGO interfaces on Pt electrodes exhibit selectivity toward the oxygen reduction reaction (ORR), but they do not have an impact on the activity of the hydrogen oxidation reaction in acidic environments. Scanning transmission electron microscopy at atomic resolution, along with Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM), revealed possible diffusion sites for H2 and O2 gas molecules and functional groups relevant to the selectivity and activity of these surfaces. Based on these insights, rGO interfaces are further demonstrated to exhibit enhanced activity for the ORR in nonaqueous environments and demonstrate the power of our ex situ engineering approach for the development of next-generation ESC devices.
| S-EPMC6753649 | biostudies-literature
Project description:Structural and colloidal stability of proteins at different surfaces and interfaces is of great importance in many fields including medical, pharmaceutical, or material science. Due to their flexibility, proteins tend to respond to their environmental conditions and can undergo structural and conformational changes. For instance, alterations in physiological factors such as temperature, ions concentration, or pH as well as the adsorption to an interface can initiate protein aggregation. Therefore, at different surfaces and interfaces the characterization of the structural and colloidal stability of proteins, which is mainly influenced by their electrostatic and hydrophobic interactions, is of fundamental importance. In this study, we utilized sum frequency generation (SFG) spectroscopy to assess the role of solution pH on the polarity and magnitude of the electric field within the hydration shell of selected model proteins adsorbed to a hydrophobic surface. We used polystyrene (PS) as a model hydrophobic surface and determined the isoelectric point (IEP) of four structurally different model proteins. Comparing the measured IEP of proteins at the PS/solution or air/solution interface with that determined in the bulk solution via zeta potential measurement, we found significant similarities between the IEP of surface adsorbed proteins and those in the bulk aqueous phase. The pH dependence behavior of proteins was correlated to their amino acid composition and degree of hydrophobicity.
| S-EPMC8360839 | biostudies-literature
Project description:Much of virus fate, both in the environment and in physical/chemical treatment, is dependent on electrostatic interactions. Developing an accurate means of predicting virion isoelectric point (pI) would help to understand and anticipate virus fate and transport, especially for viruses that are not readily propagated in the lab. One simple approach to predicting pI estimates the pH at which the sum of charges from ionizable amino acids in capsid proteins approaches zero. However, predicted pIs based on capsid charges frequently deviate by several pH units from empirically measured pIs. Recently, the discrepancy between empirical and predicted pI was attributed to the electrostatic neutralization of predictable polynucleotide-binding regions (PBRs) of the capsid interior. In this paper, we review models presupposing (i) the influence of the viral polynucleotide on surface charge or (ii) the contribution of only exterior residues to surface charge. We then compare these models to the approach of excluding only PBRs and hypothesize a conceptual electrostatic model that aligns with this approach. The PBR exclusion method outperformed methods based on three-dimensional (3D) structure and accounted for major discrepancies in predicted pIs without adversely affecting pI prediction for a diverse range of viruses. In addition, the PBR exclusion method was determined to be the best available method for predicting virus pI, since (i) PBRs are predicted independently of the impact on pI, (ii) PBR prediction relies on proteome sequences rather than detailed structural models, and (iii) PBR exclusion was successfully demonstrated on a diverse set of viruses. These models apply to nonenveloped viruses only. A similar model for enveloped viruses is complicated by a lack of data on enveloped virus pI, as well as uncertainties regarding the influence of the phospholipid envelope on charge and ion gradients.
| S-EPMC7848896 | biostudies-literature
Project description:We describe a novel isoelectric point photoswitching phenomenon in both wild-type Aequorea victoria (av) GFP and the amino acid 222 E-to-G mutant Aequorea coerulescens (ac) GFP. A combination of time-resolved microfluidic isoelectric focusing (IEF) and in situ antibody blotting IEF was employed to monitor dark (nonfluorescent) and bright (fluorescent) GFP populations. Through IEF, each population was observed to exhibit distinct isoelectric points (pI) and, thus, distinct formal electrostatic charges. Experimentally observed interconversion between the dark, higher pI and bright, lower pI GFP populations is tightly controlled by differential UV and blue light exposure. The stoichiometry and kinetics of charge transfer tied to this reversible photobleaching process are deduced. In concert with a reaction-transport model of bistable reversible charge and fluorescence photoswitching, the on-chip measurements of population interconversion rates suggest the potential for both rheostatic and discrete switch-like modulation of the electrostatic charge of GFPs depending on the illumination profile. We estimate that 3-4 formal charges distinguish the bright and dark populations of avGFP, as compared to one charge for those of acGFP. Given the proposed role of E222 as a bridge between internal and exit hydrogen-bond clusters within the GFP ?-barrel, the difference in charge switching magnitude between the two mutants provides intriguing evidence for the proton wire hypothesis of proton transport within the GFP structure, and of proton exchange with the bulk solvent. Our facile dynamic and probed IEF assays should find widespread use in analytical screening and quantitative kinetic analysis of photoswitching and other charge switching processes in response to stimuli including light, temperature, or binding/cleavage events.
| S-EPMC3488114 | biostudies-literature
Project description:Proteome-pI 2.0 is an update of an online database containing predicted isoelectric points and pKa dissociation constants of proteins and peptides. The isoelectric point-the pH at which a particular molecule carries no net electrical charge-is an important parameter for many analytical biochemistry and proteomics techniques. Additionally, it can be obtained directly from the pKa values of individual charged residues of the protein. The Proteome-pI 2.0 database includes data for over 61 million protein sequences from 20 115 proteomes (three to four times more than the previous release). The isoelectric point for proteins is predicted by 21 methods, whereas pKa values are inferred by one method. To facilitate bottom-up proteomics analysis, individual proteomes were digested in silico with the five most commonly used proteases (trypsin, chymotrypsin, trypsin + LysC, LysN, ArgC), and the peptides' isoelectric point and molecular weights were calculated. The database enables the retrieval of virtual 2D-PAGE plots and customized fractions of a proteome based on the isoelectric point and molecular weight. In addition, isoelectric points for proteins in NCBI non-redundant (nr), UniProt, SwissProt, and Protein Data Bank are available in both CSV and FASTA formats. The database can be accessed at http://isoelectricpointdb2.org.
| S-EPMC8728302 | biostudies-literature
Project description:There exists a positive correlation between the pH of subcellular compartments and the median isoelectric point (pI) for the associated proteomes. Proteins in the human lysosome-a highly acidic compartment in the cell-have a median pI of ∼6.5, whereas proteins in the more basic mitochondria have a median pI of ∼8.0. Proposed mechanisms reflect potential adaptations to pH. For example, enzyme active site general acid/base residue pKs are likely evolved to match environmental pH. However, such effects would be limited to a few residues on specific proteins, and might not affect the proteome at large. A protein model that considers residue burial upon folding recapitulates the correlation between proteome pI and environmental pH. This correlation can be fully described by a neutral evolution process; no functional selection is included in the model. Proteins in acidic environments incur a lower energetic penalty for burying acidic residues than basic residues, resulting in a net accumulation of acidic residues in the protein core. The inverse is true under alkaline conditions. The pI distributions of subcellular proteomes are likely not a direct result of functional adaptations to pH, but a molecular spandrel stemming from marginal stability.
| S-EPMC6243250 | biostudies-literature
Project description:We previously described the photoactivated depot or PAD approach that allows for the light control of therapeutic protein release. This approach relies on the ability to use light to change a protein's solubility. Traditionally this was accomplished by linking the protein to an insoluble but injectable polymer via a light cleaved linker. This allows the injected material to remain at the site of injection, until transcutaneous irradiation breaks the link between polymer and protein, permitting the protein to be absorbed. However, there are multiple problems associated with polymer based approaches: The polymer makes up a majority of the material, making it inefficient. In addition, after protein release, the polymer has to be cleared from the body, a significant design challenge. In this work, we create materials that form photoactivated depots of insulin without the need for polymers, by linking photolysis to an isoelectric point shift, which itself is linked to a solubility shift. Specifically, we linked basic groups to insulin via a light cleaved linker. These shift the normal pI of insulin from 5.4 to approximately 7. The result of this incorporation are materials that are completely soluble in mildly acidic solutions but precipitate upon injection into a pH 7 environment, i.e., the skin. We successfully synthesized four such modified insulins, demonstrating that their pI values were shifted in the expected manner. We then analyzed one of them, P2-insulin, in detail, demonstrating that it behaves as designed: It is soluble in a formulation pH of 4, but precipitates at pH 7.2, its approximate pI value. Upon irradiation, the photocleavable link to insulin is broken, and completely native and soluble insulin is released from the depot in a well behaved, first order fashion. These materials are 90% therapeutic, form completely soluble and injectable formulations in mildly acidic conditions, form insoluble depots at neutral pH, efficiently release soluble protein from these depots when irradiated, and leave behind only small easily absorbed molecules after irradiation. As such they approach ideality for photoactivated depot materials.
| S-EPMC6362458 | biostudies-literature
Project description:BackgroundCell contain diverse array of proteins with different molecular weight and isoelectric point (pI). The molecular weight and pI of protein play important role in determining the molecular biochemical function. Therefore, it was important to understand the detail regarding the molecular weight and pI of the plant proteins.ResultsA proteome-wide analysis of plant proteomes from 145 species revealed a pI range of 1.99 (epsin) to 13.96 (hypothetical protein). The spectrum of molecular mass of the plant proteins varied from 0.54 to 2236.8 kDa. A putative Type-I polyketide synthase (22244 amino acids) in Volvox carteri was found to be the largest protein in the plant kingdom. However, Type-I polyketide synthase was not found in higher plant species. Titin (806.46 kDa) and misin/midasin (730.02 kDa) were the largest proteins identified in higher plant species. The pI and molecular weight of the plant proteins showed a trimodal distribution. An acidic pI (56.44% of proteins) was found to be predominant over a basic pI (43.34% of proteins) and the abundance of acidic pI proteins was higher in unicellular algae species relative to multicellular higher plants. In contrast, the seaweed, Porphyra umbilicalis, possesses a higher proportion of basic pI proteins (70.09%). Plant proteomes were also found to contain selenocysteine (Sec), amino acid that was found only in lower eukaryotic aquatic plant lineage. Amino acid composition analysis showed Leu was high and Trp was low abundant amino acids in the plant proteome. Additionally, the plant proteomes also possess ambiguous amino acids Xaa (unknown), Asx (asparagine or aspartic acid), Glx (glutamine or glutamic acid), and Xle (leucine or isoleucine) as well.ConclusionThe diverse molecular weight and isoelectric point range of plant proteome will be helpful to understand their biochemical and functional aspects. The presence of selenocysteine proteins in lower eukaryotic organism is of interest and their expression in higher plant system can help us to understand their functional role.
| S-EPMC6681478 | biostudies-literature