Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Wearable energy-dense and power-dense supercapacitor yarns enabled by scalable graphene-metallic textile composite electrodes.

ABSTRACT: One-dimensional flexible supercapacitor yarns are of considerable interest for future wearable electronics. The bottleneck in this field is how to develop devices of high energy and power density, by using economically viable materials and scalable fabrication technologies. Here we report a hierarchical graphene-metallic textile composite electrode concept to address this challenge. The hierarchical composite electrodes consist of low-cost graphene sheets immobilized on the surface of Ni-coated cotton yarns, which are fabricated by highly scalable electroless deposition of Ni and electrochemical deposition of graphene on commercial cotton yarns. Remarkably, the volumetric energy density and power density of the all solid-state supercapacitor yarn made of one pair of these composite electrodes are 6.1 mWh cm(-3) and 1,400 mW cm(-3), respectively. In addition, this SC yarn is lightweight, highly flexible, strong, durable in life cycle and bending fatigue tests, and integratable into various wearable electronic devices.

SUBMITTER: Liu L

PROVIDER: S-EPMC4490556 | biostudies-literature | 2015 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

CNT-rGO Hydrogel-Integrated Fabric Composite Synthesized via an Interfacial Gelation Process for Wearable Supercapacitor Electrodes.

Project description:We demonstrate a flexible and stretchable supercapacitor assembled via straightforward interfacial gelation of reduced graphene oxide (rGO) with carbon nanotube (CNT) on a stretchable fabric surface. The difference between the redox potential of aqueous graphene oxide (GO) dispersion, prepared using a modified Hummers' method, and of a solid Zn plate, which was used as an external stimulus, induces a spontaneous reduction of GO flakes forming porous CNT-rGO hydrogel at the liquid-solid interface. With the aid of Zn, a macroporous and flexible CNT-rGO hydrogel was fabricated on a stretchable fabric platform using a facile fabrication method, and the CNT-rGO fabric composite was assembled into a supercapacitor to demonstrate its feasibility as a wearable electrode. The porous structure of the as-formed CNT-rGO fabric composite allows excellent electrolyte accessibility and ion transport that result in a fast charge/discharge rate up to 100 mV/s and a large areal capacity of 10.13 mF/cm2 at a discharge rate of 0.5 mA (0.1 mA/cm2). The inclusion of one-dimensional CNT as conductive bridges allows an excellent capacity retention of 95.2% after complete folding of the electrode and a capacity retention of 93.3% after 1000 bending cycles. Additional stretching test displayed a high capacity retention of 90.0% even at an applied strain as high as 50%, overcoming previous limitations of brittle graphene-based electrodes. This low-cost, lightweight, easy to synthesize, stretchable supercapacitor holds promise for next-generation wearable electronics and energy storage applications.

| S-EPMC8340110 | biostudies-literature

Surface Morphology Analysis of Metallic Structures Formed on Flexible Textile Composite Substrates.

Project description:This paper compares methods for measuring selected morphological features on the surface of thin metallic layers applied to flexible textile substrates. The methods were tested on a silver layer with a thickness of several hundred nanometers, which was applied to a textile composite with the trade name Cordura. Measurements were carried out at the micro scale using both optical coherent tomography (OCT) and the traditional contact method of using a profilometer. Measurements at the micro-scale proved the superiority of the OCT method over the contact method. The method of contactless measurement employs a dedicated algorithm for three-dimensional surface image analysis and does not affect the delicate surface structure of the measured layer in any way. Assessment of the surface profile of textile substrates and the thin films created on them, is important when estimating the contact angle, wetting behavior, or mechanical durability of the created metallic structure that can be used as the electrodes or elements of wearable electronics or textronics systems.

| S-EPMC7180940 | biostudies-literature

Preparation of Composite Monolith Supercapacitor Electrode Made from Textile-Grade Polyacrylonitrile Fibers and Phenolic Resin.

Project description:In this work a composite monolith was prepared from widely available and cost effective raw materials, textile-grade polyacrylonitrile (PAN) fibers and phenolic resin. Two activation procedures (physical and chemical) were used to increase the surface area of the produced carbon electrode. Characterization of the thermally stabilized fibers produced was made using differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA) and Carbon-Hydrogen-Nitrogen(CHN) elemental analysis, in order to choose the optimum conditions of producing the stabilized fibers. Characterization of the produced composite monolith electrode was performed using physical adsorption of nitrogen at 77 °K, cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) and electrical resistivity in order to evaluate its performance. All the electrodes prepared had a mixture of micropores and mesopores. Pressing the green monolith during the curing process was found to reduce largely the specific surface area and to some degree the electrical resistivity of the chemically activated composite electrode. Physical activation was more suitable than chemical activation, where it resulted in an electrode with specific capacity 29 F/g, good capacitive behavior and the stability of the electrical resistivity over the temperature range -130 to 80 °C. Chemical activation resulted in a very poor electrode with resistive rather than capacitive properties.

| S-EPMC7040743 | biostudies-literature

Synthesis of coaxial carbon@NiMoO<sub>4</sub> composite nanofibers for supercapacitor electrodes.

Project description:This work reports the synthesis of coaxial carbon@NiMoO4 nanofibers for supercapacitor electrode applications. Thin NiMoO4 nanosheets are uniformly coated on the conductive electrospun carbon nanofibers by a microwave assisted hydrothermal method to form a hierarchical structure, which increases the porosity as well as the conductivity of the electrode. The thickness of the NiMoO4 can be easily adjusted by varying the precursor concentrations. The high specific surface area (over 280 m2 g-1) and conductive carbon nanofiber backbone increase the utilization of the active pseudocapacitive NiMoO4 phase, resulting a high specific capacitance of 1840 F g-1.

| S-EPMC9086301 | biostudies-literature

Engineering Graphene Flakes for Wearable Textile Sensors via Highly Scalable and Ultrafast Yarn Dyeing Technique.

Project description:Multifunctional wearable e-textiles have been a focus of much attention due to their great potential for healthcare, sportswear, fitness, space, and military applications. Among them, electroconductive textile yarn shows great promise for use as next-generation flexible sensors without compromising the properties and comfort of usual textiles. However, the current manufacturing process of metal-based electroconductive textile yarn is expensive, unscalable, and environmentally unfriendly. Here we report a highly scalable and ultrafast production of graphene-based flexible, washable, and bendable wearable textile sensors. We engineer graphene flakes and their dispersions in order to select the best formulation for wearable textile application. We then use a high-speed yarn dyeing technique to dye (coat) textile yarn with graphene-based inks. Such graphene-based yarns are then integrated into a knitted structure as a flexible sensor and could send data wirelessly to a device via a self-powered RFID or a low-powered Bluetooth. The graphene textile sensor thus produced shows excellent temperature sensitivity, very good washability, and extremely high flexibility. Such a process could potentially be scaled up in a high-speed industrial setup to produce tonnes (?1000 kg/h) of electroconductive textile yarns for next-generation wearable electronics applications.

| S-EPMC6497368 | biostudies-literature

Scalable one-pot bacteria-templating synthesis route toward hierarchical, porous-Co3O4 superstructures for supercapacitor electrodes.

Project description:Template-driven strategy has been widely used to synthesize inorganic nano/micro materials. Here, we used a bottom-up controlled synthesis route to develop a powerful solution-based method of fabricating three-dimensional (3D), hierarchical, porous-Co3O4 superstructures that exhibit the morphology of flower-like microspheres (hereafter, RT-Co3O4). The gram-scale RT-Co3O4 was facilely prepared using one-pot synthesis with bacterial templating at room temperature. Large-surface-area RT-Co3O4 also has a noticeable pseudocapacitive performance because of its high mass loading per area (~10?mg cm(-2)), indicating a high capacitance of 214?F g(-1) (2.04?F cm(-2)) at 2?A g(-1) (19.02?mA cm(-2)), a Coulombic efficiency averaging over 95%, and an excellent cycling stability that shows a capacitance retention of about 95% after 4,000 cycles.

| S-EPMC3728593 | biostudies-literature

Blotting Paper-Derived Activated Porous Carbon/Reduced Graphene Oxide Composite Electrodes for Supercapacitor Applications.

Project description:A facile strategy, engineered for low-cost mass production, to synthesize biomass-derived activated carbon/reduced graphene oxide composite electrodes (GBPCs) by one-pot carbonization of blotting papers containing graphene oxide (GO) and zinc chloride (ZnCl2) was proposed. Benefitting from the water absorption characteristic of blotting papers in which the voids between the celluloses can easily absorb the GO/ZnCl2 solution, the chemical activation and reduction of GO can synchronously achieve via one-step carbonization process. As a result, the GBPCs deliver a large specific surface area to accumulate charge. Simultaneously, it provides high conductivity for electron transfer. The symmetric supercapacitor assembled with the optimal GBPCs in 6 M KOH electrolyte exhibits an excellent specific capacitance of 204 F g-1 (0.2 A g-1), outstanding rate capability of 100 F g-1 (20 A g-1). Meanwhile, it still keeps 90% of the initial specific capacitance over 10,000 cycles. The readily available raw material, effective chemical activation, simple rGO additive, and resulting electrochemical properties hold out the promise of hope to achieve low-cost, green, and large-scale production of practical activated carbon composite materials for high-efficiency energy storage applications.

| S-EPMC6943556 | biostudies-literature

Directly Grown Multiwall Carbon Nanotube and Hydrothermal MnO2 Composite for High-Performance Supercapacitor Electrodes.

Project description:MnO2-MWNT-Ni foam supercapacitor electrodes were developed based on directly grown multiwalled carbon nanotubes (MWNTs) and hydrothermal MnO2 nanostructures on Ni foam substrates. The electrodes demonstrated excellent electrochemical and battery properties. The charge transfer resistance dropped 88.8% compared with the electrode without MWNTs. A high specific capacitance of 1350.42 F·g-1 was reached at the current density of 6.5 A·g-1. The electrode exhibited a superior rate capability with 92.5% retention in 25,000 cycles. Direct MWNT growth benefits the supercapacitor application for low charge transfer resistance and strong MWNT-current collector binding.

| S-EPMC6566365 | biostudies-literature

Composite Aerogels of Carbon Nanocellulose Fibers and Mixed-Valent Manganese Oxides as Renewable Supercapacitor Electrodes.

Project description:Bio-waste derived nanocelluloses show excellent mechanical flexibility and self-aggregated capability, which enable them to be good supporting substrates for the synthesis of electroactive materials. Herein, we present a facile route for fabricating composite aerogels consisting of carbonized nanocellulose fibers (CNF) and mixed-valent manganese oxide (MnOx), toward supercapacitor applications. Mixed solutions of nanocellulose and manganese acetate with different ratios were prepared and freeze-dried into hybrid aerogels. The hybrid aerogels were then transformed into CNF/MnOx composites by a calcination process. The CNF membranes served as porous carbon nano-reservoirs for MnOx and electrolyte. The CNF/MnOx composites also kept a 3D porous aerogel structure with hierarchical pores, which enabled stable transport of both electrolyte ions and electrons to the electrode surface, leading to low a charge-transfer impedance and good electrochemical kinetics. The CNF/MnOx-based symmetric supercapacitor showed a satisfied energy density and power density of 37.5 Wh kg-1 and 2.75 kW kg-1, respectively. All the above results demonstrate the feasibility of using sustainable nanocellulose as a nanoscale carbon substrate for the synthesis of hybrid composite electrodes toward renewable supercapacitor applications.

| S-EPMC6404137 | biostudies-literature

Production of Banana Fiber Yarns for Technical Textile Reinforced Composites.

Project description:Natural fibers have been used as an alternative to synthetic ones for their greener character; banana fibers have the advantage of coming from an agricultural residue. Fibers have been extracted by mechanical means from banana tree pseudostems, as a strategy to valorize banana crops residues. To increase the mechanical properties of the composite, technical textiles can be used as reinforcement, instead of short fibers. To do so, fibers must be spun and woven. The aim of this paper is to show the viability of using banana fibers to obtain a yarn suitable to be woven, after an enzymatic treatment, which is more environmentally friendly. Extracted long fibers are cut to 50 mm length and then immersed into an enzymatic bath for their refining. Conditions of enzymatic treatment have been optimized to produce a textile grade of banana fibers, which have then been characterized. The optimum treating conditions were found with the use of Biopectinase K (100% related to fiber weight) at 45 °C, pH 4.5 for 6 h, with bath renewal after three hours. The first spinning trials show that these fibers are suitable to be used for the production of yarns. The next step is the weaving process to obtain a technical fabric for composites production.

| S-EPMC5502999 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data