Dataset Information

Study on a Mechanical Semi-Active Heave Compensation System of Drill String for Use on Floating Drilling Platform.

ABSTRACT: There are some disadvantages for existing heave compensation systems of drill string used for the Floating Drilling Platform (FDP), including high energy consumption, large and complex structure, and expensive manufacturing and maintenance costs. In view of the above, we present a streamlined mechanical semi-active heave compensation system (MSAHC) in this study. This system consists of active compensation part with the pinion and rack and passive compensation part. In order to evaluate system performance of the MSAHC, we establish its simulation model with AMEsim software. In the process of simulation, displacement of rotary hook and energy consumption is regarded as performance parameters of the system. And the change rule of two performance parameters are analyzed by changing these design parameters including gear radius of the pinion and rack, scale coefficient of PID, rotary hook load, heave height and heave period of the FDP, and accumulator volume. Then, based on the simulation results of the MSAHC system performance, we have selected out a best set of design parameters from them. Moreover, the feasibility of the design scheme of the MSAHC is effectively verified by comparison with the existing three heave compensation system. The result shows that the energy consumption of the MSAHC is lower than the active heave compensation system (AHC) and the semi-active heave compensation system (SAHC) when achieving a same compensation effect as well as the accumulator volume of MSAHC is half of the passive heave compensation system (PHC). Therefore, the new designed MSAHC not only ensure compensation effect but also lower energy consumption, and its structure is simplified by adopting the simple mechanical structure to decrease manufacturing cost, maintenance cost and floor space.

SUBMITTER: Liu Q

PROVIDER: S-EPMC4505866 | biostudies-literature | 2015

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Study on a Mechanical Semi-Active Heave Compensation System of Drill String for Use on Floating Drilling Platform.

Liu Qingyou Q Tang Yang Y Huang Chongjun C Xie Chong C

PloS one 20150717 7

There are some disadvantages for existing heave compensation systems of drill string used for the Floating Drilling Platform (FDP), including high energy consumption, large and complex structure, and expensive manufacturing and maintenance costs. In view of the above, we present a streamlined mechanical semi-active heave compensation system (MSAHC) in this study. This system consists of active compensation part with the pinion and rack and passive compensation part. In order to evaluate system p ...[more]

PMID: 26186620

Similar Datasets

Project description:OBJECTIVE:An in vitro study was made to compare mean thermal variation according to the material, design and wear of the surgical drills used during dental implant site preparation. MATERIAL AND METHODS:Three study groups (stainless steel drills with straight blades; diamond-like carbon-coated drills with straight blades; and diamond-like carbon-coated drills with twisted blades) were tested to compare material, design and wear of the surgical drill in terms of overall mean values (complete sequence of drills) and specific mean values (each drill separately). The groups comprised four drills: initial, pilot, progressive and final drill. Implant site configuration was performed through an intermittent and gradual drilling technique without irrigation at 800 rpm in standardized synthetic blocks. Maximum axial loading of two kilograms was controlled by an automatic press. Each surgical drill was submitted to 50 drillings and was sterilized every five uses. A thermographic camera analyzed the mean thermal changes. The software-controlled automatic press kept systematic drilling, axial loading and operational speed constant without any human intervention. Student's t-test, ANOVA and multiple linear regression models were performed. The level of significance was 5% (p = 0.05). RESULTS:The overall mean comparison between the stainless steel and diamond-like carbon-coated materials showed no statistically significant differences (p > 0.05), though specific mean comparison showed statistically significant differences between the drills of the different groups (p < 0.05). The twisted blades exhibited less overall and specific mean thermal variation than straight blades for the progressive and final drills (p < 0.01). In addition, the initial and pilot drills showed a greater mean thermal change than the progressive and final drills. The mean thermal variation was seen to increase during the 50 drillings. CONCLUSIONS:Within the limitations of this study, it can be concluded that the drill material did not significantly influence the overall mean thermal variation except for the pilot drill. The drill design affected overall and specific mean thermal variation since the twisted blades heated less than the straight blades. The initial and pilot drills increased the specific mean thermal variation with respect to the progressive and final drills. In addition, all drills in each group produced a gradual increase in mean temperature during the 50 drillings.

Project description:BackgroundKnee flexion contractures have been associated with increased pain and a reduced ability to perform activities of daily living. Contractures can be treated either surgically or conservatively, but these treatment options may not be as successful with worker's compensation patients. The purposes of retrospective review were to 1) determine the efficacy of using adjunctive high-intensity stretch (HIS) mechanical therapy to treat flexion contractures, and 2) compare the results between groups of worker's compensation and non-compensation patients.MethodsFifty-six patients (19 women, 37 men, age = 51.5 ± 17.0 years) with flexion contractures were treated with HIS mechanical therapy as an adjunct to outpatient physical therapy. Mechanical therapy was only prescribed for those patients whose motion had reached a plateau when treated with physical therapy alone. Patients were asked to perform six, 10-minute bouts of end-range stretching per day with the ERMI Knee Extensionater(r) (ERMI, Inc., Atlanta, GA). Passive knee extension was recorded during the postoperative visit that mechanical therapy was prescribed, 3 months after beginning mechanical therapy, and at the most recent follow-up. We used a mixed-model 2 × 3 ANOVA (group × time) to evaluate the change in passive knee extension between groups over time.ResultsRegardless of group, the use of adjunctive HIS mechanical therapy resulted in passive knee extension deficits that significantly improved from 10.5° ± 5.2° at the initial visit to 2.6° ± 3.5° at the 3 month visit (p < 0.001). The degree of extension was maintained at the most recent follow-up (2.0° ± 2.9°), which was significantly greater than the initial visit (p < 0.001), but did not differ from the 3 month visit (p = 0.23). The gains in knee extension did not differ between worker's compensation and non-compensation patients (p = 0.56).ConclusionsWe conclude that the adjunctive use of HIS mechanical therapy is an effective treatment option for patients with knee flexion contractures, regardless of whether the patient is being treated as part of a worker's compensation claim or not.

Dataset Information

Study on a Mechanical Semi-Active Heave Compensation System of Drill String for Use on Floating Drilling Platform.

Publications

Study on a Mechanical Semi-Active Heave Compensation System of Drill String for Use on Floating Drilling Platform.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets