Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Stacked 3D RRAM Array with Graphene/CNT as Edge Electrodes.

ABSTRACT: There are two critical challenges which determine the array density of 3D RRAM: 1) the scaling limit in both horizontal and vertical directions; 2) the integration of selector devices in 3D structure. In this work, we present a novel 3D RRAM structure using low-dimensional materials, including 2D graphene and 1D carbon nanotube (CNT), as the edge electrodes. A two-layer 3D RRAM with monolayer graphene as edge electrode is demonstrated. The electrical results reveal that the RRAM devices could switch normally with this very thin edge electrode at nanometer scale. Meanwhile, benefited from the asymmetric carrier transport induced by Schottky barrier at metal/CNT and oxide/CNT interfaces, a selector built-in 3D RRAM structure using CNT as edge electrode is successfully fabricated and characterized. Furthermore, the discussion of high array density potential is presented.

SUBMITTER: Bai Y

PROVIDER: S-EPMC4562297 | biostudies-literature | 2015 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Stacked 3D RRAM Array with Graphene/CNT as Edge Electrodes.

Bai Yue Y Wu Huaqiang H Wang Kun K Wu Riga R Song Lin L Li Tianyi T Wang Jiangtao J Yu Zhiping Z Qian He H

Scientific reports 20150908

There are two critical challenges which determine the array density of 3D RRAM: 1) the scaling limit in both horizontal and vertical directions; 2) the integration of selector devices in 3D structure. In this work, we present a novel 3D RRAM structure using low-dimensional materials, including 2D graphene and 1D carbon nanotube (CNT), as the edge electrodes. A two-layer 3D RRAM with monolayer graphene as edge electrode is demonstrated. The electrical results reveal that the RRAM devices could sw ...[more]

PMID: 26348797

Similar Datasets

Metal oxide-resistive memory using graphene-edge electrodes.

Project description:The emerging paradigm of 'abundant-data' computing requires real-time analytics on enormous quantities of data collected by a mushrooming network of sensors. Todays computing technology, however, cannot scale to satisfy such big data applications with the required throughput and energy efficiency. The next technology frontier will be monolithically integrated chips with three-dimensionally interleaved memory and logic for unprecedented data bandwidth with reduced energy consumption. In this work, we exploit the atomically thin nature of the graphene edge to assemble a resistive memory (∼ 3 Å thick) stacked in a vertical three-dimensional structure. We report some of the lowest power and energy consumption among the emerging non-volatile memories due to an extremely thin electrode with unique properties, low programming voltages, and low current. Circuit analysis of the three-dimensional architecture using experimentally measured device properties show higher storage potential for graphene devices compared that of metal based devices.

| S-EPMC4598621 | biostudies-literature

Enhancing electrochemical detection on graphene oxide-CNT nanostructured electrodes using magneto-nanobioprobes.

Project description:Graphene and related materials have come to the forefront of research in electrochemical sensors during recent years due to the promising properties of these nanomaterials. Further applications of these nanomaterials have been hampered by insufficient sensitivity offered by these nanohybrids for the type of molecules requiring lower detection ranges. Here, we report a signal amplification strategy based on magneto-electrochemical immunoassay which combines the advantages of carbon nanotube and reduced graphene oxide together with electrochemical bursting of magnetic nanoparticles into a large number of metal ions. Sensitive detection was achieved by precisely designing the nanohybrid and correlating the available metal ions with analyte concentration. We confirmed the ultrahigh sensitivity of this method for a new generation herbicide diuron and its analogues up to sub-picomolar concentration in standard water samples. The novel immune-detection platform showed the excellent potential applicability in rapid and sensitive screening of environmental pollutants or toxins in samples.

| S-EPMC3500845 | biostudies-other

Thermal crosstalk in 3-dimensional RRAM crossbar array.

Project description:High density 3-dimensional (3D) crossbar resistive random access memory (RRAM) is one of the major focus of the new age technologies. To compete with the ultra-high density NAND and NOR memories, understanding of reliability mechanisms and scaling potential of 3D RRAM crossbar array is needed. Thermal crosstalk is one of the most critical effects that should be considered in 3D crossbar array application. The Joule heat generated inside the RRAM device will determine the switching behavior itself, and for dense memory arrays, the temperature surrounding may lead to a consequent resistance degradation of neighboring devices. In this work, thermal crosstalk effect and scaling potential under thermal effect in 3D RRAM crossbar array are systematically investigated. It is revealed that the reset process is dominated by transient thermal effect in 3D RRAM array. More importantly, thermal crosstalk phenomena could deteriorate device retention performance and even lead to data storage state failure from LRS (low resistance state) to HRS (high resistance state) of the disturbed RRAM cell. In addition, the resistance state degradation will be more serious with continuously scaling down the feature size. Possible methods for alleviating thermal crosstalk effect while further advancing the scaling potential are also provided and verified by numerical simulation.

| S-EPMC4550907 | biostudies-literature

Integration of Graphene Electrodes with 3D Skeletal Muscle Tissue Models.

Project description:Integration of conductive electrodes with 3D tissue models can have great potential for applications in bioelectronics, drug screening, and implantable devices. As conventional electrodes cannot be easily integrated on 3D, polymeric, and biocompatible substrates, alternatives are highly desirable. Graphene offers significant advantages over conventional electrodes due to its mechanical flexibility and robustness, biocompatibility, and electrical properties. However, the transfer of chemical vapor deposition graphene onto millimeter scale 3D structures is challenging using conventional wet graphene transfer methods with a rigid poly (methyl methacrylate) (PMMA) supportive layer. Here, a biocompatible 3D graphene transfer method onto 3D printed structure using a soft poly ethylene glycol diacrylate (PEGDA) supportive layer to integrate the graphene layer with a 3D engineered ring of skeletal muscle tissue is reported. The use of softer PEGDA supportive layer, with a 105 times lower Young's modulus compared to PMMA, results in conformal integration of the graphene with 3D printed pillars and allows electrical stimulation and actuation of the muscle ring with various applied voltages and frequencies. The graphene integration method can be applied to many 3D tissue models and be used as a platform for electrical interfaces to 3D biological tissue system.

| S-EPMC8029654 | biostudies-literature

CNT/High Mass Loading MnO<sub>2</sub>/Graphene-Grafted Carbon Cloth Electrodes for High-Energy Asymmetric Supercapacitors.

Project description:Flexible supercapacitor electrodes with high mass loading are crucial for obtaining favorable electrochemical performance but still challenging due to sluggish electron and ion transport. Herein, rationally designed CNT/MnO2/graphene-grafted carbon cloth electrodes are prepared by a "graft-deposit-coat" strategy. Due to the large surface area and good conductivity, graphene grafted on carbon cloth offers additional surface areas for the uniform deposition of MnO2 (9.1 mg cm-2) and facilitates charge transfer. Meanwhile, the nanostructured MnO2 provides abundant electroactive sites and short ion transport distance, and CNT coated on MnO2 acts as interconnected conductive "highways" to accelerate the electron transport, significantly improving redox reaction kinetics. Benefiting from high mass loading of electroactive materials, favorable conductivity, and a porous structure, the electrode achieves large areal capacitances without compromising rate capability. The assembled asymmetric supercapacitor demonstrates a wide working voltage (2.2 V) and high energy density of 10.18 mWh cm-3.

| S-EPMC7770775 | biostudies-literature

Float-stacked graphene-PMMA laminate.

Project description:Semi-infinite single-atom-thick graphene is an ideal reinforcing material that can simultaneously improve the mechanical, electrical, and thermal properties of matrix. Here, we present a float-stacking strategy to accurately align the monolayer graphene reinforcement in polymer matrix. We float graphene-poly(methylmethacrylate) (PMMA) membrane (GPM) at the water-air interface, and wind-up layer-by-layer by roller. During the stacking process, the inherent water meniscus continuously induces web tension of the GPM, suppressing wrinkle and folding generation. Moreover, rolling-up and hot-rolling mill process above the glass transition temperature of PMMA induces conformal contact between each layer. This allows for pre-tension of the composite, maximizing its reinforcing efficiency. The number and spacing of the embedded graphene fillers are precisely controlled. Notably, we accurately align 100 layers of monolayer graphene in a PMMA matrix with the same intervals to achieve a specific strength of about 118.5 MPa g-1 cm3, which is higher than that of lightweight Al alloy, and a thermal conductivity of about 4.00 W m-1 K-1, which is increased by about 2,000 %, compared to the PMMA film.

| S-EPMC10928174 | biostudies-literature

High energy density asymmetric supercapacitor based on NiOOH/Ni3S2/3D graphene and Fe3O4/graphene composite electrodes.

Project description:The application of the composite of Ni3S2 nanoparticles and 3D graphene as a novel cathode material for supercapacitors is systematically investigated in this study. It is found that the electrode capacitance increases by up to 111% after the composite electrode is activated by the consecutive cyclic voltammetry scanning in 1 M KOH. Due to the synergistic effect, the capacitance and the diffusion coefficient of electrolyte ions of the activated composite electrode are ca. 3.7 and 6.5 times higher than those of the Ni3S2 electrode, respectively. Furthermore, the activated composite electrode exhibits an ultrahigh specific capacitance of 3296 F/g and great cycling stability at a current density of 16 A/g. To obtain the reasonable matching of cathode/anode electrodes, the composite of Fe(3)O(4) nanoparticles and chemically reduced graphene oxide (Fe(3)O(4)/rGO) is synthesized as the anode material. The Fe(3)O(4)/rGO electrode exhibits the specific capacitance of 661 F/g at 1 A/g and excellent rate capability. More importantly, an asymmetric supercapacitor fabricated by two different composite electrodes can be operated reversibly between 0 and 1.6 V and obtain a high specific capacitance of 233 F/g at 5 mV/s, which delivers a maximum energy density of 82.5 Wh/kg at a power density of 930 W/kg.

| S-EPMC4250917 | biostudies-literature

Graphene/h-BN Heterostructures for Vertical Architecture of RRAM Design.

Project description:The development of RRAM is one of the mainstreams for next generation non-volatile memories to replace the conventional charge-based flash memory. More importantly, the simpler structure of RRAM makes it feasible to be integrated into a passive crossbar array for high-density memory applications. By stacking up the crossbar arrays, the ultra-high density of 3D horizontal RRAM (3D-HRAM) can be realized. However, 3D-HRAM requires critical lithography and other process for every stacked layer, and this fabrication cost overhead increases linearly with the number of stacks. Here, it is demonstrated that the 2D material-based vertical RRAM structure composed of graphene plane electrode/multilayer h-BN insulating dielectric stacked layers, AlOx/TiOx resistive switching layer and ITO pillar electrode exhibits reliable device performance including forming-free, low power consumption (Pset = ~2 μW and Preset = ~0.2 μW), and large memory window (>300). The scanning transmission electron microscopy indicates that the thickness of multilayer h-BN is around 2 nm. Due to the ultrathin-insulating dielectric and naturally high thermal conductivity characteristics of h-BN, the vertical structure combining the graphene plane electrode with multilayer h-BN insulating dielectric can pave the way toward a new area of ultra high-density memory integration in the future.

| S-EPMC5575158 | biostudies-literature

Performance Enhancement of Modified 3D SWCNT/RVC Electrodes Using Microwave-Irradiated Graphene Oxide.

Project description:The goal of this article is to increase the electrode performance of 3D CNT/RVC electrodes by improving the ease of ion adsorption to and ion desorption from the electrode surfaces. This achievement was done by preparing different composites of synthesized microwave-irradiated graphene oxide (mwGO) with CNT and coated on RVC. The morphology of GO was examined by field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) study. Its surface property was checked by energy-dispersive X-ray spectra (EDX), and Fourier transform infrared spectra; whereas, for mwGO by XRD, Raman spectra, and X-ray photoelectron spectra (XPS), which revealed some structural changes of GO after irradiation, where CNTs, being sandwiched between graphene layers, built 3D highly porous architecture inside the electrodes. The electrochemical test of composite electrodes showed increased electrodes conductivity and afforded rapid ions diffusion. It is observed that the 9-CNT/mwGO/RVC composite electrode performed as the best electrode, which showed 29% increment in specific capacitance value compared to the normal CNT/RVC electrode. This best electrode also showed very high cyclic stability in its cyclic voltammetry test that maintained 97% current stability after 2000?cycles, indicating that the electrode can be an effective material for water purification technology.

| S-EPMC6881498 | biostudies-literature

Ice-templated Self-assembly of VOPO4-Graphene Nanocomposites for Vertically Porous 3D Supercapacitor Electrodes.

Project description:A simple ice-templated self-assembly process is used to prepare a three-dimensional (3D) and vertically porous nanocomposite of layered vanadium phosphates (VOPO4) and graphene nanosheets with high surface area and high electrical conductivity. The resulting 3D VOPO4-graphene nanocomposite has a much higher capacitance of 527.9 F g(-1) at a current density of 0.5 A g(-1), compared with ~247 F g(-1) of simple 3D VOPO4, with solid cycling stability. The enhanced pseudocapacitive behavior mainly originates from vertically porous structures from directionally grown ice crystals and simultaneously inducing radial segregation and forming inter-stacked structures of VOPO4-graphene nanosheets. This VOPO4-graphene nanocomposite electrode exhibits high surface area, vertically porous structure to the separator, structural stability from interstacked structure and high electrical conductivity, which would provide the short diffusion paths of electrolyte ions and fast transportation of charges within the conductive frameworks. In addition, an asymmetric supercapacitor (ASC) is fabricated by using vertically porous VOPO4-graphene as the positive electrode and vertically porous 3D graphene as the negative electrode; it exhibits a wide cell voltage of 1.6 V and a largely enhanced energy density of 108 Wh kg(-1).

| S-EPMC4558581 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data