Dataset Information

Microbial enhanced heavy crude oil recovery through biodegradation using bacterial isolates from an Omani oil field.

ABSTRACT: Biodegradation is a cheap and environmentally friendly process that could breakdown and utilizes heavy crude oil (HCO) resources. Numerous bacteria are able to grow using hydrocarbons as a carbon source; however, bacteria that are able to grow using HCO hydrocarbons are limited. In this study, HCO degrading bacteria were isolated from an Omani heavy crude oil field. They were then identified and assessed for their biodegradation and biotransformation abilities under aerobic and anaerobic conditions.Bacteria were grown in five different minimum salts media. The isolates were identified by MALDI biotyper and 16S rRNA sequencing. The nucleotide sequences were submitted to GenBank (NCBI) database. The bacteria were identified as Bacillus subtilis and B. licheniformis. To assess microbial growth and biodegradation of HCO by well-assay on agar plates, samples were collected at different intervals. The HCO biodegradation and biotransformation were determined using GC-FID, which showed direct correlation of microbial growth with an increased biotransformation of light hydrocarbons (C12 and C14). Among the isolates, B. licheniformis AS5 was the most efficient isolate in biodegradation and biotransformation of the HCO. Therefore, isolate AS5 was used for heavy crude oil recovery experiments, in core flooding experiments using Berea core plugs, where an additional 16 % of oil initially in place was recovered.This is the first report from Oman for bacteria isolated from an oil field that were able to degrade and transform HCO to lighter components, illustrating the potential use in HCO recovery. The data suggested that biodegradation and biotransformation processes may lead to additional oil recovery from heavy oil fields, if bacteria are grown in suitable medium under optimum growth conditions.

SUBMITTER: Al-Sayegh A

PROVIDER: S-EPMC4573931 | biostudies-literature | 2015

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Microbial enhanced heavy crude oil recovery through biodegradation using bacterial isolates from an Omani oil field.

Al-Sayegh Abdullah A Al-Wahaibi Yahya Y Al-Bahry Saif S Elshafie Abdulkadir A Al-Bemani Ali A Joshi Sanket S

Microbial cell factories 20150916

<h4>Background</h4>Biodegradation is a cheap and environmentally friendly process that could breakdown and utilizes heavy crude oil (HCO) resources. Numerous bacteria are able to grow using hydrocarbons as a carbon source; however, bacteria that are able to grow using HCO hydrocarbons are limited. In this study, HCO degrading bacteria were isolated from an Omani heavy crude oil field. They were then identified and assessed for their biodegradation and biotransformation abilities under aerobic an ...[more]

PMID: 26377922

Similar Datasets

Project description:Availability of inorganic nutrients, particularly nitrogen and phosphorous, is often a primary control on crude oil hydrocarbon degradation in marine systems. Many studies have empirically determined optimum levels of inorganic N and P for stimulation of hydrocarbon degradation. Nevertheless, there is a paucity of information on fundamental kinetic parameters for nutrient enhanced crude oil biodegradation that can be used to model the fate of crude oil in bioremediation programmes that use inorganic nutrient addition to stimulate oil biodegradation. Here we report fundamental kinetic parameters (Ks and qmax) for nitrate- and phosphate-stimulated crude oil biodegradation under nutrient limited conditions and with respect to crude oil, under conditions where N and P are not limiting. In the marine sediments studied, crude oil degradation was limited by both N and P availability. In sediments treated with 12.5 mg/g of oil but with no addition of N and P, hydrocarbon degradation rates, assessed on the basis of CO2 production, were 1.10 ± 0.03 μmol CO2/g wet sediment/day which were comparable to rates of CO2 production in sediments to which no oil was added (1.05 ± 0.27 μmol CO2/g wet sediment/day). When inorganic nitrogen was added alone maximum rates of CO2 production measured were 4.25 ± 0.91 μmol CO2/g wet sediment/day. However, when the same levels of inorganic nitrogen were added in the presence of 0.5% P w/w of oil (1.6 μmol P/g wet sediment) maximum rates of measured CO2 production increased more than four-fold to 18.40 ± 1.04 μmol CO2/g wet sediment/day. Ks and qmax estimates for inorganic N (in the form of sodium nitrate) when P was not limiting were 1.99 ± 0.86 μmol/g wet sediment and 16.16 ± 1.28 μmol CO2/g wet sediment/day respectively. The corresponding values for P were 63 ± 95 nmol/g wet sediment and 12.05 ± 1.31 μmol CO2/g wet sediment/day. The qmax values with respect to N and P were not significantly different (P < 0.05). When N and P were not limiting Ks and qmax for crude oil were 4.52 ± 1.51 mg oil/g wet sediment and 16.89 ± 1.25 μmol CO2/g wet sediment/day. At concentrations of inorganic N above 45 μmol/g wet sediment inhibition of CO2 production from hydrocarbon degradation was evident. Analysis of bacterial 16S rRNA genes indicated that Alcanivorax spp. were selected in these marine sediments with increasing inorganic nutrient concentration, whereas Cycloclasticus spp. were more prevalent at lower inorganic nutrient concentrations. These data suggest that simple empirical estimates of the proportion of nutrients added relative to crude oil concentrations may not be sufficient to guarantee successful crude oil bioremediation in oxic beach sediments. The data we present also help define the maximum rates and hence timescales required for bioremediation of beach sediments.

Project description:The deposition of paraffin wax in crude oil is a problem faced by the oil and gas industry during extraction, transportation, and refining of crude oil. Most of the commercialized chemical additives to prevent wax are expensive and toxic. As an environmentally friendly alternative, this study aims to find a novel thermophilic bacterial strain capable of degrading paraffin wax in crude oil to control wax deposition. To achieve this, the biodegradation of crude oil paraffin wax by 11 bacteria isolated from seawater and oil-contaminated soil samples was investigated at 70°C. The bacteria were identified as Geobacillus kaustophilus N3A7, NFA23, DFY1, Geobacillus jurassicus MK7, Geobacillus thermocatenulatus T7, Parageobacillus caldoxylosilyticus DFY3 and AZ72, Anoxybacillus geothermalis D9, Geobacillus stearothermophilus SA36, AD11, and AD24. The GCMS analysis showed that strains N3A7, MK7, DFY1, AD11, and AD24 achieved more than 70% biodegradation efficiency of crude oil in a short period (3 days). Notably, most of the strains could completely degrade C37-C40 and increase the ratio of C14-C18, especially during the initial 2 days incubation. In addition, the degradation of crude oil also resulted in changes in the pH of the medium. The degradation of crude oil is associated with the production of degradative enzymes such as alkane monooxygenase, alcohol dehydrogenase, lipase, and esterase. Among the 11 strains, the highest activities of alkane monooxygenase were recorded in strain AD24. A comparatively higher overall alcohol dehydrogenase, lipase, and esterase activities were observed in strains N3A7, MK7, DFY1, AD11, and AD24. Thus, there is a potential to use these strains in oil reservoirs, crude oil processing, and recovery to control wax deposition. Their ability to withstand high temperature and produce degradative enzymes for long-chain hydrocarbon degradation led to an increase in the short-chain hydrocarbon ratio, and subsequently, improving the quality of the oil.

Project description:Oil spills in the subarctic marine environment off the coast of Labrador, Canada, are increasingly likely due to potential oil production and increases in ship traffic in the region. To understand the microbiome response and how nutrient biostimulation promotes biodegradation of oil spills in this cold marine setting, marine sediment microcosms amended with diesel or crude oil were incubated at in situ temperature (4°C) for several weeks. Sequencing of 16S rRNA genes following these spill simulations revealed decreased microbial diversity and enrichment of putative hydrocarbonoclastic bacteria that differed depending on the petroleum product. Metagenomic sequencing revealed that the genus Paraperlucidibaca harbors previously unrecognized capabilities for alkane biodegradation, which were also observed in Cycloclasticus. Genomic and amplicon sequencing together suggest that Oleispira and Thalassolituus degraded alkanes from diesel, while Zhongshania and the novel PGZG01 lineage contributed to crude oil alkane biodegradation. Greater losses in PAHs from crude oil than from diesel were consistent with Marinobacter, Pseudomonas_D, and Amphritea genomes exhibiting aromatic hydrocarbon biodegradation potential. Biostimulation with nitrogen and phosphorus (4.67 mM NH4Cl and 1.47 mM KH2PO4) was effective at enhancing n-alkane and PAH degradation following low-concentration (0.1% [vol/vol]) diesel and crude oil amendments, while at higher concentrations (1% [vol/vol]) only n-alkanes in diesel were consumed, suggesting toxicity induced by compounds in unrefined crude oil. Biostimulation allowed for a more rapid shift in the microbial community in response to petroleum amendments, more than doubling the rates of CO2 increase during the first few weeks of incubation. IMPORTANCE Increases in transportation of diesel and crude oil in the Labrador Sea will pose a significant threat to remote benthic and shoreline environments, where coastal communities and wildlife are particularly vulnerable to oil spill contaminants. Whereas marine microbiology has not been incorporated into environmental assessments in the Labrador Sea, there is a growing demand for microbial biodiversity evaluations given the pronounced impact of climate change in this region. Benthic microbial communities are important to consider given that a fraction of spilled oil typically sinks such that its biodegradation occurs at the seafloor, where novel taxa with previously unrecognized potential to degrade hydrocarbons were discovered in this work. Understanding how cold-adapted microbiomes catalyze hydrocarbon degradation at low in situ temperature is crucial in the Labrador Sea, which remains relatively cold throughout the year.

Project description:Low salinity waterflooding (low salinity-EOR) has attracted great interest from many giant oil producers and is currently under trial in some of the oil fields of the United States, Middle Eastern countries, and North Sea reservoirs. Most of the reported studies on this process were carried out for medium to relatively heavy oil with significant polar contents. In this work, we have investigated low salinity waterflooding performance for light paraffinic crude oil with a low acid number. This study has been performed using crude oil from an Indian offshore oilfield and Indian offshore seawater. Oil recovery efficiencies of seawater and its diluted versions (low salinity seawater) were evaluated through core-flooding experiments performed on a silica sand pack containing small amounts (2 wt %) of bentonite clay saturated with crude oil. Interfacial tension and wettability studies were performed to understand the associated low salinity effects on the crude oil/brine/rock properties. Effluent brine produced during the flooding experiments was also analyzed to obtain a clearer insight into the low salinity-enhanced oil recovery (EOR) mechanism. The results showed that injection of low salinity seawater can significantly increase the waterflood recovery in comparison with high salinity seawater injection. Interfacial tension and contact angle studies revealed that there is an optimum dilution level at which the interfacial tension and wettability are the most favorable for enhanced oil recovery even in the case of light paraffinic crude. These results are in line with the results obtained from the core-flooding experiments. The possible reason behind recovery improvement based on the interfacial tension and wettability studies in conjugation with the effluent brine analysis has been discussed in detail. In this study, we have observed that the enhanced oil recovery efficiency could be achieved by applying low salinity seawater flooding even in the case of light paraffinic oil with a low acid number.

Project description:One of the serious problems in the oil industry is precipitation and deposition of asphaltenes in the different oil production stages including formation, wellbore, production tubing, flow lines, and separation units. This phenomenon causes a dramatic increase in the cost of oil production, processing, and transferring. Thus, it seems to be very necessary to use the removing methods for precipitated asphaltenes in different crude oil production and transferring stages. In this study, the ability of microorganisms for biodegradation of precipitated asphaltenes was investigated. For this purpose, four bacterial consortiums were isolated from oil-contaminated soil, crude oil, reservoir water, and oil sludge samples of an oil field located in the southwest of Iran. Based on the results of the designed experiments, by using response surface methodology (RSM) and central composite design, the bacterial consortiums were cultured in the flasks. Three levels of temperatures, salinity, pH, and initial asphaltene concentration as the substrate were considered as the parameters of culture medium and incubated growth mediums for 60 days. The maximum asphaltene biodegradation was 46.41% caused by the crude oil consortium including Staphylococcus saprophyticus sp. and Bacillus cereus sp. at 45 °C, salinity 160 g·L-1, pH 6.5, and 25 g·L-1 initial asphaltene concentration. Also, it was observed that the negative or positive impacts of culture media conditions such as temperature and salinity on asphaltene degradation depended on the type of the available bacterial consortium. The carbon-hydrogen-nitrogen-sulfur analysis showed that carbon, hydrogen, nitrogen, and in some cases, the sulfur in biodegraded samples are less than in control samples. Moreover, Fourier transform infrared analysis indicated that the alkyne groups were less resistant to biodegradation and were eliminated thoroughly after 2 months of incubation. In addition, alkane components were partially removed in treated asphaltene fraction. The parameters of culture medium were optimized by RSM, and besides, their effects on the performance of bacteria in the asphaltene biodegradation process were discussed. The validity of some available kinetic models to describe the behavior of the studied bacteria consortium was investigated, and it was observed that Tessier, Moser, and Contois models accurately predict the values of asphaltenes and biomass concentration at 30, 45, and 60 °C, respectively.

Dataset Information

Microbial enhanced heavy crude oil recovery through biodegradation using bacterial isolates from an Omani oil field.

Publications

Microbial enhanced heavy crude oil recovery through biodegradation using bacterial isolates from an Omani oil field.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets