Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Parametrization of macrolide antibiotics using the force field toolkit.

ABSTRACT: Macrolides are an important class of antibiotics that target the bacterial ribosome. Computer simulations of macrolides are limited as specific force field parameters have not been previously developed for them. Here, we determine CHARMM-compatible force field parameters for erythromycin, azithromycin, and telithromycin, using the force field toolkit (ffTK) plugin in VMD. Because of their large size, novel approaches for parametrizing them had to be developed. Two methods for determining partial atomic charges, from interactions with TIP3P water and from the electrostatic potential, as well as several approaches for fitting the dihedral parameters were tested. The performance of the different parameter sets was evaluated by molecular dynamics simulations of the macrolides in ribosome, with a distinct improvement in maintenance of key interactions observed after refinement of the initial parameters. Based on the results of the macrolide tests, recommended procedures for parametrizing very large molecules using ffTK are given.

SUBMITTER: Pavlova A

PROVIDER: S-EPMC4575642 | biostudies-literature | 2015 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Parametrization of macrolide antibiotics using the force field toolkit.

Pavlova Anna A Gumbart James C JC

Journal of computational chemistry 20150817 27

Macrolides are an important class of antibiotics that target the bacterial ribosome. Computer simulations of macrolides are limited as specific force field parameters have not been previously developed for them. Here, we determine CHARMM-compatible force field parameters for erythromycin, azithromycin, and telithromycin, using the force field toolkit (ffTK) plugin in VMD. Because of their large size, novel approaches for parametrizing them had to be developed. Two methods for determining partial ...[more]

PMID: 26280362

Similar Datasets

On the force field optimisation of [Formula: see text]-lactam cores using the force field Toolkit.

Project description:When employing molecular dynamics (MD) simulations for computer-aided drug design, the quality of the used force fields is highly important. Here we present reparametrisations of the force fields for the core molecules from 9 different [Formula: see text]-lactam classes, for which we utilized the force field Toolkit and Gaussian calculations. We focus on the parametrisation of the dihedral angles, with the goal of reproducing the optimised quantum geometry in MD simulations. Parameters taken from CGenFF turn out to be a good initial guess for the multiplicity of each dihedral angle, but the key to a successful parametrisation is found to lie in the phase shifts. Based on the optimised quantum geometry, we come up with a strategy for predicting the phase shifts prior to the dihedral potential fitting. This allows us to successfully parameterise 8 out of the 11 molecules studied here, while the remaining 3 molecules can also be parameterised with small adjustments. Our work highlights the importance of predicting the dihedral phase shifts in the ligand parametrisation protocol, and provides a simple yet valuable strategy for improving the process of parameterising force fields of drug-like molecules.

| S-EPMC9399072 | biostudies-literature

Force Field Parametrization of Metal Ions from Statistical Learning Techniques.

Project description:A novel statistical procedure has been developed to optimize the parameters of nonbonded force fields of metal ions in soft matter. The criterion for the optimization is the minimization of the deviations from ab initio forces and energies calculated for model systems. The method exploits the combination of the linear ridge regression and the cross-validation techniques with the differential evolution algorithm. Wide freedom in the choice of the functional form of the force fields is allowed since both linear and nonlinear parameters can be optimized. In order to maximize the information content of the data employed in the fitting procedure, the composition of the training set is entrusted to a combinatorial optimization algorithm which maximizes the dissimilarity of the included instances. The methodology has been validated using the force field parametrization of five metal ions (Zn2+, Ni2+, Mg2+, Ca2+, and Na+) in water as test cases.

| S-EPMC5763284 | biostudies-literature

Force-field parametrization based on radial and energy distribution functions.

Project description:We propose a novel force-field-parametrization procedure that fits the parameters of potential functions in a manner that the pair distribution function (DF) of molecules derived from candidate parameters can reproduce the given target DF. Conventionally, approaches to minimize the difference between the candidate and target DFs employ radial DFs (RDF). RDF itself has been reported to be insufficient for uniquely identifying the parameters of a molecule. To overcome the weakness, we introduce energy DF (EDF) as a target DF, which describes the distribution of the pairwise energy of molecules. We found that the EDF responds more sensitively to a small perturbation in the pairwise potential parameters and provides better fitting accuracy compared to that of RDF. These findings provide valuable insights into a wide range of coarse graining methods, which determine parameters using information obtained from a higher-level calculation than that of the developed force field. © 2019 The Authors. Journal of Computational Chemistry published by Wiley Periodicals, Inc.

| S-EPMC6790663 | biostudies-literature

Optimal Solution to the Torsional Coefficient Fitting Problem in Force Field Parametrization.

Project description:Molecular modeling is an excellent tool for studying biological systems on the atomic scale. Depending on objects, which may be proteins, nucleic acids, or lipids, different force fields are recommended. The phospholipid bilayers constitute an example, in which behavior is extensively studied using molecular dynamics simulations due to limitations of experimental methods. The reliability of the results is strongly dependent on an appropriate description of these compounds. There are some deficiencies in the parametrization of intra- and intermolecular interactions that result in incorrect reproduction of phospholipid bilayer properties known from experimental studies, such as temperatures of phase transitions. Refinement of the force field parameters of nonbonded interactions present in the studied system is required to close these discrepancies. Such parameters as partial charges and torsional potential coefficients are crucial in this issue and not obtainable from experimental studies. This work presents a new fitting procedure for torsional coefficients that employs linear algebra theory and compares it with the Monte Carlo method. The proposed algebraic approach can be applied to any considered molecular system. In the manuscript, it is presented on the example of dimethyl phosphoric acid molecule. The advantages of our method encompass finding an optimal solution, the lack of additional parameters required by the algorithm, and significantly shorter computational time. Additionally, we indicate the importance of proper assignment of the partial charges.

| S-EPMC8041298 | biostudies-literature

The Effect of Using a Twin-Range Cutoff Scheme for Nonbonded Interactions: Implications for Force-Field Parametrization?

Project description:Recently, concerns have been voiced regarding the validity of the GROMOS force fields, being parametrized using a twin-range cutoff scheme, in which longer ranged nonbonded forces and energies are updated less frequently than shorter ranged ones. Here we demonstrate that the influence of such a scheme on the thermodynamic, structural, and dynamic properties used in the parametrization of the GROMOS force fields is minor. We find root-mean-square differences of maximally 0.5 kJ/mol for the solvation free energy and heat of vaporization and of maximally 0.4% for the density. Slightly larger differences are observed when switching from a group-based to an atom-based cutoff scheme. In cases where the twin-range cutoff scheme does result in minor differences compared to a single-range cutoff these are well within the deviation from the experimentally measured values.

| S-EPMC7558304 | biostudies-literature

Infinite Dilution Activity Coefficients as Constraints for Force Field Parametrization and Method Development.

Project description:Molecular simulations begin with an underlying energy model or force field and from this can predict diverse physical properties. However, force fields were often developed with relatively limited data sets, yet accuracy for diverse properties across a broad chemical space is desirable; therefore, tests of such accuracy are particularly important. Here, to this end, we calculated 237 infinite dilution activity coefficients (IDACs), comparing with experimental values from NIST's ThermoML database. We found that calculated IDAC values correlate strongly with experiment (Pearson R of 0.92 ± 0.01) and allow us to identify specific functional groups that appear to present challenges to the force field employed. One potentially valuable aspect of IDACs, as compared to solvation free energies, which have been frequently employed as force field tests, is that the same molecules serve both as solutes and solvents in different cases, allowing us to ensure that force fields are not overly tuned to one particular environment or solvent.

| S-EPMC6663494 | biostudies-literature

Parametrization of an Orbital-Based Linear-Scaling Quantum Force Field for Noncovalent Interactions.

Project description:We parametrize a linear-scaling quantum mechanical force field called mDC for the accurate reproduction of nonbonded interactions. We provide a new benchmark database of accurate ab initio interactions between sulfur-containing molecules. A variety of nonbond databases are used to compare the new mDC method with other semiempirical, molecular mechanical, ab initio, and combined semiempirical quantum mechanical/molecular mechanical methods. It is shown that the molecular mechanical force field significantly and consistently reproduces the benchmark results with greater accuracy than the semiempirical models and our mDC model produces errors twice as small as the molecular mechanical force field. The comparisons between the methods are extended to the docking of drug candidates to the Cyclin-Dependent Kinase 2 protein receptor. We correlate the protein-ligand binding energies to their experimental inhibition constants and find that the mDC produces the best correlation. Condensed phase simulation of mDC water is performed and shown to produce O-O radial distribution functions similar to TIP4P-EW.

| S-EPMC3985928 | biostudies-literature

Two-State, Three-Mode Parametrization of the Force Field of a Retinal Chromophore Model.

Project description:In recent years, the potential energy surfaces of the penta-2,4-dieniminium cation have been investigated using several electronic structure methods. The resulting pool of geometrical, electronic, and energy data provides a suitable basis for the construction of a topographically correct analytical model of the molecule force field and, therefore, for a better understanding of this class of molecules, which includes the chromophore of visual pigments. In the present contribution, we report the construction of such a model for regions of the force field that drive the photochemical and thermal isomerization of the central double bound of the cation. While previous models included only two modes, it is here shown that the proposed three-mode model and corresponding set of parameters are able to reproduce the complex topographical and electronic structure features seen in electronically correlated data obtained at the XMCQDPT2//CASSCF/6-31G* level of theory.

| S-EPMC7147463 | biostudies-literature

General Force-Field Parametrization Scheme for Molecular Dynamics Simulations of Conjugated Materials in Solution.

Project description:We describe a general scheme to obtain force-field parameters for classical molecular dynamics simulations of conjugated polymers. We identify a computationally inexpensive methodology for calculation of accurate intermonomer dihedral potentials and partial charges. Our findings indicate that the use of a two-step methodology of geometry optimization and single-point energy calculations using DFT methods produces potentials which compare favorably to high level theory calculation. We also report the effects of varying the conjugated backbone length and alkyl side-chain lengths on the dihedral profiles and partial charge distributions and determine the existence of converged lengths above which convergence is achieved in the force-field parameter sets. We thus determine which calculations are required for accurate parametrization and the scope of a given parameter set for variations to a given molecule. We perform simulations of long oligomers of dioctylfluorene and hexylthiophene in explicit solvent and find peristence lengths and end-length distributions consistent with experimental values.

| S-EPMC4980687 | biostudies-literature

FFParam: Standalone package for CHARMM additive and Drude polarizable force field parametrization of small molecules.

Project description:Accurate force-field (FF) parameters are key to reliable prediction of properties obtained from molecular modeling (MM) and molecular dynamics (MD) simulations. With ever-widening applicability of MD simulations, robust parameters need to be generated for a wider range of chemical species. The CHARMM General Force Field program (CGenFF, https://cgenff.umaryland.edu/) is a tool for obtaining initial parameters for a given small molecule based on analogy with the available CGenFF parameters. However, improvement of these parameters is often required and performing their optimization remains tedious and time consuming. In addition, tools for optimization of small molecule parameters in the context of the Drude polarizable FF are not yet available. To overcome these issues, the FFParam package has been designed to facilitate the parametrization process. The package includes a graphical user interface (GUI) created using Qt libraries. FFParam supports Gaussian and Psi4 for performing quantum mechanical calculations and CHARMM and OpenMM for MM calculations. A Monte Carlo simulated annealing (MCSA) algorithm has been implemented for automated fitting of partial atomic charge, atomic polarizabilities and Thole scale parameters. The LSFITPAR program is called for automated fitting of bonded parameters. Accordingly, FFParam provides all the features required for generation and analysis of CHARMM and Drude FF parameters for small molecules. FFParam-GUI includes a text editor, graph plotter, molecular visualization, and text to table converter to meet various requirements of the parametrization process. It is anticipated that FFParam will facilitate wider use of CGenFF as well as promote future use of the Drude polarizable FF.

| S-EPMC7323454 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data