Dataset Information

Simulating Crop Evapotranspiration Response under Different Planting Scenarios by Modified SWAT Model in an Irrigation District, Northwest China.

ABSTRACT: Modelling crop evapotranspiration (ET) response to different planting scenarios in an irrigation district plays a significant role in optimizing crop planting patterns, resolving agricultural water scarcity and facilitating the sustainable use of water resources. In this study, the SWAT model was improved by transforming the evapotranspiration module. Then, the improved model was applied in Qingyuan Irrigation District of northwest China as a case study. Land use, soil, meteorology, irrigation scheduling and crop coefficient were considered as input data, and the irrigation district was divided into subdivisions based on the DEM and local canal systems. On the basis of model calibration and verification, the improved model showed better simulation efficiency than did the original model. Therefore, the improved model was used to simulate the crop evapotranspiration response under different planting scenarios in the irrigation district. Results indicated that crop evapotranspiration decreased by 2.94% and 6.01% under the scenarios of reducing the planting proportion of spring wheat (scenario 1) and summer maize (scenario 2) by keeping the total cultivated area unchanged. However, the total net output values presented an opposite trend under different scenarios. The values decreased by 3.28% under scenario 1, while it increased by 7.79% under scenario 2, compared with the current situation. This study presents a novel method to estimate crop evapotranspiration response under different planting scenarios using the SWAT model, and makes recommendations for strategic agricultural water management planning for the rational utilization of water resources and development of local economy by studying the impact of planting scenario changes on crop evapotranspiration and output values in the irrigation district of northwest China.

SUBMITTER: Liu X

PROVIDER: S-EPMC4595335 | biostudies-literature | 2015

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Simulating Crop Evapotranspiration Response under Different Planting Scenarios by Modified SWAT Model in an Irrigation District, Northwest China.

Liu Xin X Wang Sufen S Xue Han H Singh Vijay P VP

PloS one 20151006 10

Modelling crop evapotranspiration (ET) response to different planting scenarios in an irrigation district plays a significant role in optimizing crop planting patterns, resolving agricultural water scarcity and facilitating the sustainable use of water resources. In this study, the SWAT model was improved by transforming the evapotranspiration module. Then, the improved model was applied in Qingyuan Irrigation District of northwest China as a case study. Land use, soil, meteorology, irrigation s ...[more]

PMID: 26439928

Shared Molecules

Only show the datasets with similarity scores above: 0.5

Threshold

0.5

Similar Datasets

Project description:Optimum planting geometries have been shown to increase crop yields in maize-soybean intercrop systems. However, little is known about whether changes in planting geometry improve the seasonal water use of maize and soybean intercrops. We conducted two different field experiments in 2013 and 2014 to investigate the effects of changes in planting geometry on water use efficiency (WUE) and evapotranspiration (ETc) of maize (Zea mays L.) and soybean [Glycine max (L.) Merr.] relay strip intercrop systems. Our results showed that the leaf area index of maize for both years where intercropping occurred was notably greater compared to sole maize, thus the soil water content (SWC), soil evaporation (E), and throughfall followed a decreasing trend in the following order: central row of maize strip (CRM) < adjacent row between maize and soybean strip (AR) < central row of soybean strip (CRS). When intercropped, the highest grain yield for maize and total yields were recorded for the 40:120 cm and 40:160 cm planting geometries using 160 cm and 200 cm bandwidth, respectively. By contrast, the highest grain yield of intercropped soybean was appeared for the 20:140 cm and 20:180 cm planting geometries. The largest land equivalent ratios were 1.62 for the 40:120 cm planting geometry and 1.79 for the 40:160 cm planting geometry, indicating that both intercropping strategies were advantageous. Changes in planting geometries did not show any significant effect on the ETc of the maize and soybean intercrops. WUEs in the different planting geometries of intercrop systems were lower compared to sole cropping. However, the highest group WUEs of 23.06 and 26.21 kg ha-1 mm-1 for the 40:120 cm and 40:160 cm planting geometries, respectively, were 39% and 23% higher than those for sole cropping. Moreover, the highest water equivalent ratio values of 1.66 and 1.76 also appeared for the 40:120 cm and 40:160 cm planting geometries. We therefore suggest that an optimum planting geometry of 40:160 cm and bandwidth of 200 cm could be a viable planting pattern management method for attaining high group WUE in maize-soybean intercrop systems.

Dataset Information

Simulating Crop Evapotranspiration Response under Different Planting Scenarios by Modified SWAT Model in an Irrigation District, Northwest China.

Publications

Simulating Crop Evapotranspiration Response under Different Planting Scenarios by Modified SWAT Model in an Irrigation District, Northwest China.

Shared Molecules

Only show the datasets with similarity scores above: 0.5

Threshold

0.5

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets