Dataset Information

Cell adhesion and growth enabled by biomimetic oligopeptide modification of a polydopamine-poly(ethylene oxide) protein repulsive surface.

ABSTRACT: Protein-repulsive surfaces modified with ligands for cell adhesion receptors have been widely developed for controlling the cell adhesion and growth in tissue engineering. However, the question of matrix production and deposition by cells on these surfaces has rarely been addressed. In this study, protein-repulsive polydopamine-poly(ethylene oxide) (PDA-PEO) surfaces were functionalized with an RGD-containing peptide (RGD), with a collagen-derived peptide binding fibronectin (Col), or by a combination of these peptides (RGD + Col, ratio 1:1) in concentrations of 90 fmol/cm(2) and 700 fmol/cm(2) for each peptide type. When seeded with vascular endothelial CPAE cells, the PDA-PEO surfaces proved to be completely non-adhesive for cells. On surfaces with lower peptide concentrations and from days 1 to 3 after seeding, cell adhesion and growth was restored practically only on the RGD-modified surface. However, from days 3 to 7, cell adhesion and growth was improved on surfaces modified with Col and with RGD + Col. At higher peptide concentrations, the cell adhesion and growth was markedly improved on all peptide-modified surfaces in both culture intervals. However, the collagen-derived peptide did not increase the expression of fibronectin in the cells. The deposition of fibronectin on the material surface was generally very low and similar on all peptide-modified surfaces. Nevertheless, the RGD + Col surfaces exhibited the highest cell adhesion stability under a dynamic load, which correlated with the highest expression of talin and vinculin in the cells on these surfaces. A combination of RGD + Col therefore seems to be the most promising for surface modification of biomaterials, e.g. vascular prostheses.

SUBMITTER: Musilkova J

PROVIDER: S-EPMC4598348 | biostudies-literature | 2015 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Cell adhesion and growth enabled by biomimetic oligopeptide modification of a polydopamine-poly(ethylene oxide) protein repulsive surface.

Musilkova Jana J Kotelnikov Ilya I Novotna Katarina K Pop-Georgievski Ognen O Rypacek Frantisek F Bacakova Lucie L Proks Vladimir V

Journal of materials science. Materials in medicine 20151008 11

Protein-repulsive surfaces modified with ligands for cell adhesion receptors have been widely developed for controlling the cell adhesion and growth in tissue engineering. However, the question of matrix production and deposition by cells on these surfaces has rarely been addressed. In this study, protein-repulsive polydopamine-poly(ethylene oxide) (PDA-PEO) surfaces were functionalized with an RGD-containing peptide (RGD), with a collagen-derived peptide binding fibronectin (Col), or by a combi ...[more]

PMID: 26449443

Similar Datasets

Project description:Joints that connect thermoplastic polymer matrices (TPMs) and metals, which are obtained by comolding, are of growing importance in numerous applications. The overall performance of these constructs is strongly impacted by the TPM-metal interfacial strength, which can be tuned by tailoring the surface chemistry of the metal prior to the comolding process. In the present work, a model TPM-metal system consisting of poly(methyl methacrylate) (PMMA) and titanium is used to prepare comolded joints. The interfacial adhesion is quantified by wire pullout experiments. Pullout tests prior to and following surface modification are performed and analyzed. Unmodified wires show poor interfacial strength, with a work of adhesion (Ga) value of 3.8 J m-2. To enhance interfacial adhesion, a biomimetic polydopamine (PDA) layer is first deposited on titanium followed by a second layer of a poly(methyl methacrylate-co-methacrylic acid) (P(MMA-co-MAA)) copolymer prior to comolding. During processing, the MAA moieties of the copolymer thermally react with PDA, forming amide bonds, while MMA promotes the formation of secondary bonds and molecular interdigitation with the PMMA matrix. Control testing reveals that neither PDA nor the copolymer provides a substantial increase in adhesion. However, when used in combination, a significant increase in adhesion is detected. This observation indicates a pronounced synergistic effect between the two layers that strengthens the PMMA-titanium bonding. Enhanced adhesion is optimized by tuning the MMA-to-MAA ratio of the copolymer, which shows a maximum at a 24% MAA content and a greatly increased Ga value of 155 J m-2; this value corresponds to a 40-fold increase. Further growth in the Ga values at higher MAA contents is hindered by the thermal cross-linking of MAA; MAA contents above 24% restrict the formation of secondary bonds and molecular interdigitation with the PMMA chains. Our results provide new design principles to produce thermoplastic-metal comolded joints with strong interfaces.

Project description:Stimuli-responsive biomaterials are used to facilitate drug and gene delivery by shielding the drug/gene during circulation times and selectively releasing the cargo at the desired target. Within stimuli-responsive materials, pH-responsive materials are exploited for delivery to specific organs, intracellular compartments, cancer cells, site of inflammation or infection as those sites are characterized by pH that is different from the blood pH. In this paper we use molecular dynamics (MD) simulations to design such pH-responsive biomaterials where the balance between the various intermolecular interactions (e.g., electrostatics, van der Waals) within the biomaterials allow biofunctional molecules to be reversibly shielded and exposed to the environment with change in pH. In our model the shielding aspect is imparted by a polyethylene glycol (PEG) brush and the pH-responsive component is a PEG-tethered oligopeptide that undergoes changes in conformations via protonation of residues upon changes in pH. Starting with a PEG-tethered peptide in a monodisperse short PEG brush, we first vary the composition and sequence of histidine (H), lysine (K), and glutamate (E) along the oligopeptide sequence to find the design parameters that maximize the shielding and exposure of the oligopeptide at pH ? 7.0 and pH < 7.0, respectively. Then, we probe the effect of the PEG brush on the conformations of the oligopeptides by simulating PEG-tethered peptide in a bimodal PEG brush containing short PEG and long PEG chains. We characterize the intermolecular interactions involving the PEG, peptide, and solvent that influence the shielded and exposed conformations of the oligopeptides at the two different pHs. In a short monodisperse PEG brush, with a longer PEG-tethered peptide containing large blocks of histidines that undergo change in protonation state as a response to pH change, placed between a protonated lysine and deprotonated glutamate, the PEG brush exhibits maximum shielding and exposure with pH change. This change from shielded to exposed state is driven by electrostatic repulsion upon H protonation. The presence of long PEG chains in a bimodal PEG brush leads to dominating PEG-peptide attractive interactions that reduces the contrast in shielded and exposed conformations of the PEG-tethered peptide upon protonation of histidines.

Dataset Information

Cell adhesion and growth enabled by biomimetic oligopeptide modification of a polydopamine-poly(ethylene oxide) protein repulsive surface.

Publications

Cell adhesion and growth enabled by biomimetic oligopeptide modification of a polydopamine-poly(ethylene oxide) protein repulsive surface.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets