Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Band Structure Engineering and Thermoelectric Properties of Charge-Compensated Filled Skutterudites.

ABSTRACT: Thermoelectric properties of semiconductors are intimately related to their electronic band structure, which can be engineered via chemical doping. Dopant Ga in the cage-structured skutterudite Co4Sb12 substitutes Sb sites while occupying the void sites. Combining quantitative scanning transmission electron microscopy and first-principles calculations, we show that Ga dual-site occupancy breaks the symmetry of the Sb-Sb network, splits the deep triply-degenerate conduction bands, and drives them downward to the band edge. The charge-compensating nature of the dual occupancy Ga increases overall filling fraction limit. By imparting this unique band structure feature, and judiciously doping the materials by increasing the Yb content, we promote the Fermi level to a point where carriers are in energetic proximity to these features. Increased participation of these heavier bands in electronic transport leads to increased thermopower and effective mass. Further, the localized distortion from Ga/Sb substitution enhances the phonon scattering to reduce the thermal conductivity effectively.

SUBMITTER: Shi X

PROVIDER: S-EPMC4600978 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Magnetism in Na-filled Fe-based skutterudites.

Project description:The interplay of superconductivity and magnetism is a subject of ongoing interest, stimulated most recently by the discovery of Fe-based superconductivity and the recognition that spin-fluctuations near a magnetic quantum critical point may provide an explanation for the superconductivity and the order parameter. Here we investigate magnetism in the Na filled Fe-based skutterudites using first principles calculations. NaFe4Sb12 is a known ferromagnet near a quantum critical point. We find a ferromagnetic metallic state for this compound driven by a Stoner type instability, consistent with prior work. In accord with prior work, the magnetization is overestimated, as expected for a material near an itinerant ferromagnetic quantum critical point. NaFe4P12 also shows a ferromagnetic instability at the density functional level, but this instability is much weaker than that of NaFe4Sb12, possibly placing it on the paramagnetic side of the quantum critical point. NaFe4As12 shows intermediate behavior. We also present results for skutterudite FeSb3, which is a metastable phase that has been reported in thin film form.

| S-EPMC4450575 | biostudies-other

The d-p band-inversion topological insulator in bismuth-based skutterudites.

Project description:Skutterudites, a class of materials with cage-like crystal structure which have received considerable research interest in recent years, are the breeding ground of several unusual phenomena such as heavy fermion superconductivity, exciton-mediated superconducting state and Weyl fermions. Here, we predict a new topological insulator in bismuth-based skutterudites, in which the bands involved in the topological band-inversion process are d- and p-orbitals, which is distinctive with usual topological insulators, for instance in Bi2Se3 and BiTeI the bands involved in the topological band-inversion process are only p-orbitals. Due to the present of large d-electronic states, the electronic interaction in this topological insulator is much stronger than that in other conventional topological insulators. The stability of the new material is verified by binding energy calculation, phonon modes analysis, and the finite temperature molecular dynamics simulations. This new material can provide nearly zero-resistivity signal current for devices and is expected to be applied in spintronics devices.

| S-EPMC4038835 | biostudies-literature

Ligand-Mediated Band Engineering in Bottom-Up Assembled SnTe Nanocomposites for Thermoelectric Energy Conversion.

Project description:The bottom-up assembly of colloidal nanocrystals is a versatile methodology to produce composite nanomaterials with precisely tuned electronic properties. Beyond the synthetic control over crystal domain size, shape, crystal phase, and composition, solution-processed nanocrystals allow exquisite surface engineering. This provides additional means to modulate the nanomaterial characteristics and particularly its electronic transport properties. For instance, inorganic surface ligands can be used to tune the type and concentration of majority carriers or to modify the electronic band structure. Herein, we report the thermoelectric properties of SnTe nanocomposites obtained from the consolidation of surface-engineered SnTe nanocrystals into macroscopic pellets. A CdSe-based ligand is selected to (i) converge the light and heavy bands through partial Cd alloying and (ii) generate CdSe nanoinclusions as a secondary phase within the SnTe matrix, thereby reducing the thermal conductivity. These SnTe-CdSe nanocomposites possess thermoelectric figures of merit of up to 1.3 at 850 K, which is, to the best of our knowledge, the highest thermoelectric figure of merit reported for solution-processed SnTe.

| S-EPMC6588270 | biostudies-literature

Charge transfer engineering to achieve extraordinary power generation in GeTe-based thermoelectric materials.

Project description:By the fine manipulation of the exceptional long-range germanium-telluride (Ge─Te) bonding through charge transfer engineering, we have achieved exceptional thermoelectric (TE) and mechanical properties in lead-free GeTe. This chemical bonding mechanism along with a semiordered zigzag nanostructure generates a notable increase of the average zT to a record value of ~1.73 in the temperature range of 323 to 773 K with ultrahigh maximum zT ~ 2.7. In addition, we significantly enhanced the Vickers microhardness numbers (Hv) to an extraordinarily high value of 247 Hv and effectively eliminated the thermal expansion fluctuation at the phase transition, which was problematic for application, by the present charge transfer engineering process and concomitant formation of microstructures. We further fabricated a single-leg TE generator and obtained a conversion efficiency of ~13.4% at the temperature difference of 463 K on a commercial instrument, which is located at the pinnacle of TE conversion.

| S-EPMC10132743 | biostudies-literature

Effect of Refractory Tantalum Metal Filling on the Microstructure and Thermoelectric Properties of Co4Sb12 Skutterudites.

Project description:We report a systematic investigation of the microstructure and thermoelectric properties of refractory element-filled nanostructured Co4Sb12 skutterudites. The refractory tantalum (Ta) metal-filled Co4Sb12 samples (Ta x Co4Sb12 (x = 0, 0.4, 0.6, and 0.8)) are synthesized using a solid-state synthesis route. All the samples are composed of a single skutterudite phase. Meanwhile, nanometer-sized equiaxed grains are present in the Ta0.2Co4Sb12 and Ta0.4Co4Sb12 samples, and bimodal distributions of equiaxed grains and elongated grains are observed in Ta0.6Co4Sb12 and Ta0.8Co4Sb12 samples. The dominant carrier type changes from electrons (n-type) to holes (p-type) with an increase in Ta concentration in the samples. The power factor of the Ta0.6Co4Sb12 sample is increased to 2.12 mW/mK2 at 623 K due to the 10-fold reduction in electrical resistivity. The lowest lattice thermal conductivity observed for Ta0.6Co4Sb12 indicates the rattling action of Ta atoms and grain boundary scattering. Rietveld refinement of XRD data and the analysis of lattice thermal conductivity data using the Debye model confirm that Ta occupies at the voids as well as the Co site. The figure of merit (ZT) of ∼0.4 is obtained in the Ta0.6Co4Sb12 sample, which is comparable to single metal-filled p-type skutterudites reported to date. The thermoelectric properties of the refractory Ta metal-filled skutterudites might be useful to achieve both n-type and p-type thermoelectric legs using a single filler atom and could be one of replacements of the rare earth-filled skutterudites with improved thermoelectric properties.

| S-EPMC7876860 | biostudies-literature

In-situ resonant band engineering of solution-processed semiconductors generates high performance n-type thermoelectric nano-inks.

Project description:Thermoelectric devices possess enormous potential to reshape the global energy landscape by converting waste heat into electricity, yet their commercial implementation has been limited by their high cost to output power ratio. No single "champion" thermoelectric material exists due to a broad range of material-dependent thermal and electrical property optimization challenges. While the advent of nanostructuring provided a general design paradigm for reducing material thermal conductivities, there exists no analogous strategy for homogeneous, precise doping of materials. Here, we demonstrate a nanoscale interface-engineering approach that harnesses the large chemically accessible surface areas of nanomaterials to yield massive, finely-controlled, and stable changes in the Seebeck coefficient, switching a poor nonconventional p-type thermoelectric material, tellurium, into a robust n-type material exhibiting stable properties over months of testing. These remodeled, n-type nanowires display extremely high power factors (~500?µW?m-1K-2) that are orders of magnitude higher than their bulk p-type counterparts.

| S-EPMC7190739 | biostudies-literature

Non-Rigid Band Structure in Mg2Ge for Improved Thermoelectric Performance.

Project description:Magnesium silicide and its solid solutions are among the most attractive materials for thermoelectric generators in the temperature range of 500-800 K. However, while n-type Mg2(Si,Ge,Sn) materials show excellent thermoelectric performance, the corresponding p-type solid solutions are still inferior, mainly due to less favorable properties of the valence bands compared to the conduction bands. Here, Li doped Mg2Ge with a thermoelectric figure of merit zT of 0.5 at 700 K is reported, which is four times higher than that of p-type Mg2Si and double than that of p-type Mg2Sn. The reason for the excellent properties is an unusual temperature dependence of Seebeck coefficient and electrical conductivity compared to a standard highly doped semiconductor. The properties cannot be captured assuming a rigid band structure but well reproduced assuming two parabolic valence bands with a strong temperature dependent interband separation. According to the analysis, the difference in energy between the two bands decrease with temperature, leading to a band convergence at around 650 K and finally to an inversion of the band positions. The finding of a combination of a light and a heavy band that are non-rigid with temperature can pave the way for further optimization of p-type Mg2(Si,Ge,Sn).

| S-EPMC7312433 | biostudies-literature

Control of the Thermoelectric Properties of Mg2Sn Single Crystals via Point-Defect Engineering.

Project description:Mg2Sn is a potential thermoelectric (TE) material that can directly convert waste heat into electricity. In this study, Mg2Sn single-crystal ingots are prepared by melting under an Ar atmosphere. The prepared ingots contain Mg vacancies (VMg) as point defects, which results in the formation of two regions: an Mg2Sn single-crystal region without VMg (denoted as the single-crystal region) and a region containing VMg (denoted as the VMg region). The VMg region is embedded in the matrix of the single-crystal region. The interface between the VMg region and the single-crystal region is semi-coherent, which does not prevent electron carrier conduction but does increase phonon scattering. Furthermore, electron carrier concentration depends on the fraction of VMg, reflecting the acceptor characteristics of VMg. The maximum figure of merit zTmax of 1.4(1) × 10-2 is realised for the Mg2Sn single-crystal ingot by introducing VMg. These results demonstrate that the TE properties of Mg2Sn can be optimised via point-defect engineering.

| S-EPMC7005024 | biostudies-literature

Disorder enabled band structure engineering of a topological insulator surface.

Project description:Three-dimensional topological insulators are bulk insulators with Z2 topological electronic order that gives rise to conducting light-like surface states. These surface electrons are exceptionally resistant to localization by non-magnetic disorder, and have been adopted as the basis for a wide range of proposals to achieve new quasiparticle species and device functionality. Recent studies have yielded a surprise by showing that in spite of resisting localization, topological insulator surface electrons can be reshaped by defects into distinctive resonance states. Here we use numerical simulations and scanning tunnelling microscopy data to show that these resonance states have significance well beyond the localized regime usually associated with impurity bands. At native densities in the model Bi2X3 (X=Bi, Te) compounds, defect resonance states are predicted to generate a new quantum basis for an emergent electron gas that supports diffusive electrical transport.

| S-EPMC5296772 | biostudies-literature

Importance of non-parabolic band effects in the thermoelectric properties of semiconductors.

Project description:We present an analysis of the thermoelectric properties of of n-type GeTe and SnTe in relation to the lead chalcogenides PbTe and PbSe. We find that the singly degenerate conduction bands of semiconducting GeTe and SnTe are highly non-ellipsoidal, even very close to the band edges. This leads to isoenergy surfaces with a strongly corrugated shape that is clearly evident at carrier concentrations well below 0.005 e per formula unit (7-9 × 10(19) cm(-3) depending on material). Analysis within Boltzmann theory suggests that this corrugation may be favorable for the thermoelectric transport. Our calculations also indicate that values of the power factor for these two materials may well exceed those of PbTe and PbSe. As a result these materials may exhibit n-type performance exceeding that of the lead chalcogenides.

| S-EPMC3819605 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data