Bioinspired Breathable Architecture for Water Harvesting.
Ontology highlight
ABSTRACT:
SUBMITTER: von Spreckelsen RM
PROVIDER: S-EPMC4649541 | biostudies-literature | 2015 Nov
REPOSITORIES: biostudies-literature
Publications
Bioinspired Breathable Architecture for Water Harvesting.
von Spreckelsen Rowan M RM Harris Matthew T MT Wigzell James M JM Fraser Rebekah C RC Carletto Andrea A Mosquin Daniel P K DP Justice Douglas D Badyal Jas Pal S JP
Scientific reports 20151118
Thuja plicata is a coniferous tree which displays remarkable water channelling properties. In this article, an easily fabricated mesh inspired by the hierarchical macro surface structure of Thuja plicata branchlets is described which emulates this efficient water collection behaviour. The key parameters are shown to be the pore size, pore angle, mesh rotation, tilt angle (branch droop) and layering (branch overlap). Envisaged societal applications include water harvesting and low cost breathable ...[more]
Similar Datasets
Project description:Smart water-collecting functions are naturally endowed on biological surfaces with unique wettable microstructures, e.g., beetle back with "alternate hydrophobic, hydrophilic micro-regions", and spider silk with wet-rebuilt "spindle-knot, joint" structures. Enlightened by the creature features, design of bio-inspired surfaces becomes the active issue in need of human beings for fresh water resource. Recently, as observed from spider web in nature, the net of spider silk is usually set in different situations and slopes in air, thus spider silks can be placed in all kinds of orientations as capturing water. Here, we show the styles and orientations of hump-on-string to control the ability of water collection as bioinspired silks are fabricated successfully. As different strings, sizes (height, length, pitch) of humps can become the controlling on volumes of extreme water drops. It is related to the different solid/liquid contact regions resulting in the as-modulated wet adhesion due to orientations of humps-on-strings. The conversion of high-low adhesion can be achieved to rely on orientations for the effect of capturing water drops. These studies offer an insight into enhancement of water collection efficiency and are helpful to design smart materials for controlled water drop capture and release via conversions of high-low adhesion.
| S-EPMC4728488 | biostudies-literature
Project description:Faced with a new concept to learn, our brain does not work in isolation. It uses all previously learned knowledge. In addition, the brain is able to isolate the knowledge that does not benefit us, and to use what is actually useful. In machine learning, we do not usually benefit from the knowledge of other learned tasks. However, there is a methodology called Multitask Learning (MTL), which is based on the idea that learning a task along with other related tasks produces a transfer of information between them, what can be advantageous for learning the first one. This paper presents a new method to completely design MTL architectures, by including the selection of the most helpful subtasks for the learning of the main task, and the optimal network connections. In this sense, the proposed method realizes a complete design of the MTL schemes. The method is simple and uses the advantages of the Extreme Learning Machine to automatically design a MTL machine, eliminating those factors that hinder, or do not benefit, the learning process of the main task. This architecture is unique and it is obtained without testing/error methodologies that increase the computational complexity. The results obtained over several real problems show the good performances of the designed networks with this method.
| S-EPMC5480319 | biostudies-other
Project description:Water scarcity issues associated with inadequate access to clean water and sanitation is a ubiquitous problem occurring globally. Addressing future challenges will require a combination of new technological development in water purification and environmental remediation technology with suitable conservation policies. In this scenario, new bioinspired materials will play a pivotal role in the development of more efficient and environmentally friendly solutions. The role of amphiphilic self-assembly on the fabrication of new biomimetic membranes for membrane separation like reverse osmosis is emphasized. Mesoporous support materials for semiconductor growth in the photocatalytic degradation of pollutants and new carriers for immobilization of bacteria in bioreactors are used in the removal and processing of different kind of water pollutants like heavy metals. Obstacles to improve and optimize the fabrication as well as a better understanding of their performance in small-scale and pilot purification systems need to be addressed. However, it is expected that these new biomimetic materials will find their way into the current water purification technologies to improve their purification/removal performance in a cost-effective and environmentally friendly way.
| S-EPMC5456750 | biostudies-other
Project description:Large-scale and high-efficient water collection of microfibers with long-term durability still remains challenging. Here we present well-controlled, bioinspired spindle-knot microfibers with cavity knots (named cavity-microfiber), precisely fabricated via a simple gas-in-water microfluidic method, to address this challenge. The cavity-microfiber is endowed with unique surface roughness, mechanical strength, and long-term durability due to the design of cavity as well as polymer composition, thus enabling an outstanding performance of water collection. The maximum water volume collected on a single knot is almost 495 times than that of the knot on the cavity-microfiber. Moreover, the spider-web-like networks assembled controllably by cavity-microfibers demonstrate excellent large-scale and high-efficient water collection. To maximize the water-collecting capacity, nodes/intersections should be designed on the topology of the network as many as possible. Our light-weighted yet tough, low-cost microfibers with high efficiency in directional water transportation offers promising opportunities for large-scale water collection in water-deficient areas.
| S-EPMC5714965 | biostudies-literature
Project description:Access to clean water is a global challenge, and fog collectors are a promising solution. Polycarbonate (PC) fibers have been used in fog collectors but with limited efficiency. In this study, we show that controlling voltage polarity and humidity during the electrospinning of PC fibers improves their surface properties for water collection capability. We experimentally measured the effect of both the surface morphology and the chemistry of PC fiber on their surface potential and mechanical properties in relation to the water collection efficiency from fog. PC fibers produced at high humidity and with negative voltage polarity show a superior water collection rate combined with the highest tensile strength. We proved that electric potential on surface and morphology are crucial, as often designed by nature, for enhancing the water collection capabilities via the single-step production of fibers without any postprocessing needs.
| S-EPMC8158858 | biostudies-literature
Project description:Dew water, mostly ignored until now, can provide clean freshwater resources, just by extracting the atmospheric vapor available in surrounding air. Inspired by silicon-based solar panels, the vapor can be harvested by a concept of water condensing panels. Efficient water harvesting requires not only a considerable yield but also a timely water removal from the surface since the very beginning of condensation to avoid the huge evaporation losses. This translates into strict surface properties, which are difficult to simultaneously realize. Herein, we study various functionalized silicon surfaces, including the so-called Black Silicon, which supports two droplet motion modes-out-of-plane jumping and in-plane sweeping, due to its unique surface morphology, synergistically leading to a pioneering combination of above two required characteristics. According to silicon material's scalability, the proposed silicon-based water panels would benefit from existing infrastructures toward dual functions of energy harvesting in daytime and water harvesting in nighttime.
| S-EPMC8319802 | biostudies-literature
Project description:Iron has been used previously in water decontamination, either unsupported or supported on clays, polymers, carbons or ceramics such as silica. However, the reported synthesis procedures are tedious, lengthy (involving various steps), and either utilise or produce toxic chemicals. Herein, the use of a simple, rapid, bio-inspired green synthesis method is reported to prepare, for the first time, a family of iron supported on green nanosilica materials (Fe@GN) to create new technological solutions for water remediation. In particular, Fe@GN were employed for the removal of arsenate ions as a model for potentially toxic elements in aqueous solution. Several characterization techniques were used to study the physical, structural and chemical properties of the new Fe@GN. When evaluated as an adsorption platform for the removal of arsenate ions, Fe@GN exhibited high adsorption capacity (69 mg of As per g of Fe@GN) with superior kinetics (reaching ∼35 mg As per g sorbent per hr) - threefold higher than the highest removal rates reported to date. Moreover, a method was developed to regenerate the Fe@GN allowing for a full recovery and reuse of the adsorbent in subsequent extractions; strongly highlighting the potential technological benefits of these new green materials.
| S-EPMC5351802 | biostudies-literature
Project description:Nature can generate plasma in liquids more efficiently than human-designed devices using electricity, acoustics, or light. In the animal world, snapping shrimp can induce cavitation that collapses to produce high pressures and temperatures, leading to efficient plasma formation with photon and shock wave emission via energy focusing. Here, we report a bioinspired mechanical device that mimics the plasma generation technique of the snapping shrimp. This device was manufactured using additive manufacturing based on micro-x-ray computed tomography of a snapping shrimp claw molt. A spring fixture was designed to reliably actuate the claw with appropriate force and velocity to produce a high-speed water jet that matches the cavitation number and Reynolds number of the shrimp. Light emission and shocks were imaged, which indicate that our device reproduces the shrimp's plasma generation technique and is more efficient than other plasma generation methods.
| S-EPMC6420313 | biostudies-other
Project description:The passive capture of clean water from humid air without reliance on bulky equipment and high energy has been a substantial challenge and has attracted significant interest as a potential environmentally friendly alternative to traditional water harvesting methods. Metal-organic frameworks (MOFs) offer a high potential for this application due to their structural versatility which permits scalable, facile modulations of structural and functional elements. Although MOFs are promising materials for water harvesting, little research has been done to address the microstructure-adsorbing characteristics relationship with respect to the dynamic adsorption-desorption process. In this article, we present a parametric study of nine hydrolytically stable MOFs with diverse structures for unraveling fundamental material properties that govern the kinetics of water sequestration in this class of materials as well as investigating overall uptake capacity gravimetrically. The effects of temperature, relative humidity, and powder bed thickness on the adsorption-desorption process are explored for achieving optimal operational parameters. We found that Zr-MOF-808 can produce up to 8.66 LH2O kg-1MOF day-1, an extraordinary finding that outperforms any previously reported values for MOF-based systems. The presented findings help to deepen our understanding and guide the discovery of next-generation water harvesting materials.
| S-EPMC6992632 | biostudies-literature
Project description:Despite huge need in the medical domain and significant development efforts, artificial cells to date have limited composition and functionality. Although some artificial cells have proven successful for producing therapeutics or performing in vitro specific reactions, they have not been investigated in vivo to determine whether they preserve their architecture and functionality while avoiding toxicity. Here, these limitations are overcome and customizable cell mimic is achieved-molecular factories (MFs)-by supplementing giant plasma membrane vesicles derived from donor cells with nanometer-sized artificial organelles (AOs). MFs inherit the donor cell's natural cytoplasm and membrane, while the AOs house reactive components and provide cell-like architecture and functionality. It is demonstrated that reactions inside AOs take place in a close-to-nature environment due to the unprecedented level of complexity in the composition of the MFs. It is further demonstrated that in a zebrafish vertebrate animal model, these cell mimics show no apparent toxicity and retain their integrity and function. The unique advantages of highly varied composition, multicompartmentalized architecture, and preserved functionality in vivo open new biological avenues ranging from the study of biorelevant processes in robust cell-like environments to the production of specific bioactive compounds.
| S-EPMC7029636 | biostudies-literature