Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Novel Flower-like Nickel Sulfide as an Efficient Electrocatalyst for Non-aqueous Lithium-Air Batteries.

ABSTRACT: In this paper, metal sulfide materials have been explored for the first time as a new choice of bifunctional cathode electrocatalyst materials for non-aqueous lithium-air batteries (LABs). Nickel sulfides with two different morphologies of flower-like (f-NiS) and rod-like (r-NiS) are successfully synthesized using a hydrothermal method with and without the assistance of cetyltrimethyl ammonium bromide. As LAB cathode catalysts, both f-NiS and r-NiS demonstrate excellent catalytic activities towards the formation and decomposition of Li2O2, resulting in improved specific capacity, reduced overpotentials and enhanced cycling performance when compared to those of pure Super P based electrode. Moreover, the morphology of NiS materials can greatly affect LAB performance. Particularly, the f-NiS is more favorable than r-NiS in terms of their application in LABs. When compared to both r-NiS and pure super P materials as LAB cathode materials, this f-NiS catalyst material can give the highest capacity of 6733?mA h g(-1) and the lowest charge voltage of 4.24?V at the current density of 75?mA g(-1) and also exhibit an quite stable cycling performance.

SUBMITTER: Ma Z

PROVIDER: S-EPMC4677382 | biostudies-literature | 2015 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Bimetallic Nickel Cobalt Sulfide as Efficient Electrocatalyst for Zn-Air Battery and Water Splitting.

Project description:The development of efficient earth-abundant electrocatalysts for oxygen reduction, oxygen evolution, and hydrogen evolution reactions (ORR, OER, and HER) is important for future energy conversion and energy storage devices, for which both rechargeable Zn-air batteries and water splitting have raised great expectations. Herein, we report a single-phase bimetallic nickel cobalt sulfide ((Ni,Co)S2) as an efficient electrocatalyst for both OER and ORR. Owing to the synergistic combination of Ni and Co, the (Ni,Co)S2 exhibits superior electrocatalytic performance for ORR, OER, and HER in an alkaline electrolyte, and the first principle calculation results indicate that the reaction of an adsorbed O atom with a H2O molecule to form a *OOH is the potential limiting step in the OER. Importantly, it could be utilized as an advanced air electrode material in Zn-air batteries, which shows an enhanced charge-discharge performance (charging voltage of 1.71 V and discharge voltage of 1.26 V at 2 mA cm-2), large specific capacity (842 mAh gZn -1 at 5 mA cm-2), and excellent cycling stability (480 h). Interestingly, the (Ni,Co)S2-based Zn-air battery can efficiently power an electrochemical water-splitting unit with (Ni,Co)S2 serving as both the electrodes. This reveals that the prepared (Ni,Co)S2 has promising applications in future energy conversion and energy storage devices.

| S-EPMC6325096 | biostudies-literature

Nickel-Doped Silver Sulfide: An Efficient Air-Stable Electrocatalyst for Hydrogen Evolution from Neutral Water.

Project description:A low-cost, platinum-free electrocatalyst for hydrogen (H2) generation via the water splitting reaction holds great promise to meet the demand of clean and sustainable energy sources. Recent studies are mainly concerned with semiconducting materials like sulfides, selenides, and phosphides of different transition metals as electrocatalysts. Doping of the transition metals within the host matrix is a good strategy to improve the electrocatalytic activity of the host material. However, this activity largely depends on the nature of the dopant metal and its host matrix as well. To exploit this idea, here, in the present work, we have synthesized semiconducting Ag2S nanoparticles and successfully doped them with different transition metals like Mn, Fe, Co, and Ni to study their electrocatalytic activity for the hydrogen evolution reaction from neutral water (pH = 7). Among the systems doped with these transition metals, the Ni-doped Ag2S (Ni-Ag2S) system shows a very low overpotential (50 mV) with high catalytic current in neutral water. The trend in electrocatalytic activity of different transition metals has also been explained. The Ni-Ag2S system also shows very good stability in ambient atmosphere over a long period of time and suffers no catalytic degradation in the presence of oxygen. Structural characterizations are carried out using X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy to establish the phase purity and morphology of the materials.

| S-EPMC6644178 | biostudies-literature

High-Energy-Density Rechargeable Lithium-Nickel Chloride Aqueous Solution Batteries.

Project description:High-energy-density rechargeable batteries with performance beyond that of lithium-ion batteries are required for next-generation electric vehicles. We propose a novel rechargeable battery with a lithium anode and a NiCl2 aqueous cathode that is separated Li1.4Al0.4Ge0.2Ti1.4(PO4)3 as a water-stable lithium-ion-conducting solid electrolyte. The cell was discharged up to 93% of the theoretical cathode capacity at 0.5 mA cm-2 and 25 °C. The calculated energy density, based on the weights of NiCl2 and Li, and the average discharge voltage of 2.4 V at 0.5 mA cm-2, was 852 Wh kg-1, which is more than twice as high as that of conventional lithium-ion batteries. The cell was successfully cycled for 50 cycles without any degradation of the charge and discharge voltages at 0.5 mA cm-2 and 25 °C for 5 h charge and 5 h discharge, where the utilization of NiCl2 was 80%.

| S-EPMC6641902 | biostudies-literature

Lithium hexamethyldisilazide as electrolyte additive for efficient cycling of high-voltage non-aqueous lithium metal batteries.

Project description:High-voltage lithium metal batteries suffer from poor cycling stability caused by the detrimental effect on the cathode of the water moisture present in the non-aqueous liquid electrolyte solution, especially at high operating temperatures (e.g., ≥60 °C). To circumvent this issue, here we report lithium hexamethyldisilazide (LiHMDS) as an electrolyte additive. We demonstrate that the addition of a 0.6 wt% of LiHMDS in a typical fluorine-containing carbonate-based non-aqueous electrolyte solution enables a stable Li||LiNi0.8Co0.1Mn0.1O2 (NCM811) coin cell operation up to 1000 or 500 cycles applying a high cut-off cell voltage of 4.5 V in the 25 °C-60 °C temperature range. The LiHMDS acts as a scavenger for hydrofluoric acid and water and facilitates the formation of an (electro)chemical robust cathode|electrolyte interphase (CEI). The LiHMDS-derived CEI prevents the Ni dissolution of NCM811, mitigates the irreversible phase transformation from layered structure to rock-salt phase and suppresses the side reactions with the electrolyte solution.

| S-EPMC9666536 | biostudies-literature

Graphitic Carbon Quantum Dots Modified Nickel Cobalt Sulfide as Cathode Materials for Alkaline Aqueous Batteries.

Project description:Carbon quantum dots (CQDs) as a new class of emerging materials have gradually drawn researchers' concern in recent years. In this work, the graphitic CQDs are prepared through a scalable approach, achieving a high yield with more than 50%. The obtained CQDs are further used as structure-directing and conductive agents to synthesize novel N,S-CQDs/NiCo2S4 composite cathode materials, manifesting the enhanced electrochemical properties resulted from the synergistic effect of highly conductive N,S-codoped CQDs offering fast electronic transport and unique micro-/nanostructured NiCo2S4 microspheres with Faradaic redox characteristic contributing large capacity. Moreover, the nitrogen-doped reduced graphene oxide (N-rGO)/Fe2O3 composite anode materials exhibit ultrahigh specific capacity as well as significantly improved rate property and cycle performance originating from the high-capacity prism-like Fe2O3 hexahedrons tightly wrapped by highly conductive N-rGO. A novel alkaline aqueous battery assembled by these materials displays a specific energy (50.2 Wh kg-1), ultrahigh specific power (9.7 kW kg-1) and excellent cycling performance with 91.5% of capacity retention at 3 A g-1 for 5000 cycles. The present research offers a valuable guidance for the exploitation of advanced energy storage devices by the rational design and selection of battery/capacitive composite materials.

| S-EPMC7770733 | biostudies-literature

Efficient Sulfur Host Based on Yolk-Shell Iron Oxide/Sulfide-Carbon Nanospindles for Lithium-Sulfur Batteries.

Project description:Numerous nanostructured materials have been reported as efficient sulfur hosts to suppress the problematic "shuttling" of lithium polysulfides (LiPSs) in lithium-sulfur (Li-S) batteries. However, direct comparison of these materials in their efficiency of suppressing LiPSs shuttling is challenging, owing to the structural and morphological differences between individual materials. This study introduces a simple route to synthesize a series of sulfur host materials with the same yolk-shell nanospindle morphology but tunable compositions (Fe3 O4 , FeS, or FeS2 ), which allows for a systematic investigation into the specific effect of chemical composition on the electrochemical performances of Li-S batteries. Among them, the S/FeS2 -C electrode exhibits the best performance and delivers an initial capacity of 877.6 mAh g-1 at 0.5 C with a retention ratio of 86.7 % after 350 cycles. This approach can also be extended to the optimization of materials for other functionalities and applications.

| S-EPMC7986775 | biostudies-literature

Non-polar ether-based electrolyte solutions for stable high-voltage non-aqueous lithium metal batteries.

Project description:The electrochemical instability of ether-based electrolyte solutions hinders their practical applications in high-voltage Li metal batteries. To circumvent this issue, here, we propose a dilution strategy to lose the Li+/solvent interaction and use the dilute non-aqueous electrolyte solution in high-voltage lithium metal batteries. We demonstrate that in a non-polar dipropyl ether (DPE)-based electrolyte solution with lithium bis(fluorosulfonyl) imide salt, the decomposition order of solvated species can be adjusted to promote the Li+/salt-derived anion clusters decomposition over free ether solvent molecules. This selective mechanism favors the formation of a robust cathode electrolyte interphase (CEI) and a solvent-deficient electric double-layer structure at the positive electrode interface. When the DPE-based electrolyte is tested in combination with a Li metal negative electrode (50 μm thick) and a LiNi0.8Co0.1Mn0.1O2-based positive electrode (3.3 mAh/cm2) in pouch cell configuration at 25 °C, a specific discharge capacity retention of about 74% after 150 cycles (0.33 and 1 mA/cm2 charge and discharge, respectively) is obtained.

| S-EPMC9935899 | biostudies-literature

Hierarchical Nickel-Cobalt Dichalcogenide Nanostructure as an Efficient Electrocatalyst for Oxygen Evolution Reaction and a Zn-Air Battery.

Project description:A unique three-dimensional (3D) structure consisting of a hierarchical nickel-cobalt dichalcogenide spinel nanostructure is investigated for its electrocatalytic properties at benign neutral and alkaline pH and applied as an air cathode for practical zinc-air batteries. The results show a high oxygen evolution reaction catalytic activity of nickel-cobalt sulfide nanosheet arrays grown on carbon cloth (NiCo2S4 NS/CC) over the commercial benchmarking catalyst under both pH conditions. In particular, the NiCo2S4 NS/CC air cathode shows high discharge capacity, a narrow potential gap between discharge and charge, and superior cycle durability with reversibility, which exceeds that of commercial precious metal-based electrodes. The excellent performance of NiCo2S4 NS/CC in water electrolyzers and zinc-air batteries is mainly due to highly exposed electroactive sites with a rough surface, morphology-based advantages of nanosheet arrays, good adhesion between NiCo2S4 and the conducting carbon cloth, and the active layer formed of nickel-cobalt (oxy)hydroxides during water splitting. These results suggest that NiCo2S4 NS/CC could be a promising candidate as an efficient electrode for high-performance water electrolyzers and rechargeable zinc-air batteries.

| S-EPMC6644433 | biostudies-literature

Electrolyte engineering via ether solvent fluorination for developing stable non-aqueous lithium metal batteries

Project description:Fluorination of ether solvents is an effective strategy to improve the electrochemical stability of non-aqueous electrolyte solutions in lithium metal batteries. However, excessive fluorination detrimentally impacts the ionic conductivity of the electrolyte, thus limiting the battery performance. Here, to maximize the electrolyte ionic conductivity and electrochemical stability, we introduce the targeted trifluoromethylation of 1,2-dimethoxyethane to produce 1,1,1-trifluoro-2,3-dimethoxypropane (TFDMP). TFDMP is used as a solvent to prepare a 2 M non-aqueous electrolyte solution comprising bis(fluorosulfonyl)imide salt. This electrolyte solution shows an ionic conductivity of 7.4 mS cm–1 at 25 °C, an oxidation stability up to 4.8 V and an efficient suppression of Al corrosion. When tested in a coin cell configuration at 25 °C using a 20 μm Li metal negative electrode, a high mass loading LiNi0.8Co0.1Mn0.1O2-based positive electrode (20 mg cm–2) with a negative/positive (N/P) capacity ratio of 1, discharge capacity retentions (calculated excluding the initial formation cycles) of 81% after 200 cycles at 0.1 A g–1 and 88% after 142 cycles at 0.2 A g–1 are achieved. Fluorination of solvents, useful for non-aqueous lithium-based batteries, improves the electrochemical stability but decreases the ionic conductivity. Here, the authors report a targeted functionalization of an ether solvent to balance the electrolyte ionic conductivity and oxidative stability.

| S-EPMC9849263 | biostudies-literature

A dual-function liquid electrolyte additive for high-energy non-aqueous lithium metal batteries.

Project description:Engineering the formulation of non-aqueous liquid electrolytes is a viable strategy to produce high-energy lithium metal batteries. However, when the lithium metal anode is combined with a Ni-rich layered cathode, the (electro)chemical stability of both electrodes could be compromised. To circumvent this issue, we report a combination of aluminum ethoxide (0.4 wt.%) and fluoroethylene carbonate (5 vol.%) as additives in a conventional LiPF6-containing carbonate-based electrolyte solution. This electrolyte formulation enables the formation of mechanically robust and ionically conductive interphases on both electrodes' surfaces. In particular, the alumina formed at the interphases prevents the formation of dendritic structures on the lithium metal anode and mitigate the stress-induced cracking and phase transformation in the Ni-rich layered cathode. By coupling a thin (i.e., about 40 μm) lithium metal anode with a high-loading (i.e., 21.5 mg cm-2) LiNi0.8Co0.1Mn0.1O2-based cathode in coin cell configuration and lean electrolyte conditions, the engineered electrolyte allows a specific discharge capacity retention of 80.3% after 130 cycles at 60 mA g-1 and 30 °C which results in calculated specific cell energy of about 350 Wh kg-1.

| S-EPMC8917126 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data