Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Novel Iron-based ternary amorphous oxide semiconductor with very high transparency, electronic conductivity, and mobility.

ABSTRACT: Here we report that ternary metal oxides of type (Me)2O3 with the primary metal (Me) constituent being Fe (66 atomic (at.) %) along with the two Lanthanide elements Tb (10 at.%) and Dy (24 at.%) can show excellent semiconducting transport properties. Thin films prepared by pulsed laser deposition at room temperature followed by ambient oxidation showed very high electronic conductivity (>5 × 10(4) S/m) and Hall mobility (>30 cm(2)/V-s). These films had an amorphous microstructure which was stable to at least 500 °C and large optical transparency with a direct band gap of 2.85 ± 0.14 eV. This material shows emergent semiconducting behavior with significantly higher conductivity and mobility than the constituent insulating oxides. Since these results demonstrate a new way to modify the behaviors of transition metal oxides made from unfilled d- and/or f-subshells, a new class of functional transparent conducting oxide materials could be envisioned.

SUBMITTER: Malasi A

PROVIDER: S-EPMC4680984 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Novel Polyethylene Fibers of Very High Thermal Conductivity Enabled by Amorphous Restructuring.

Project description:High-thermal-conductivity polymers are very sought after for applications in various thermal management systems. Although improving crystallinity is a common way for increasing the thermal conductivity (k) of polymers, it has very limited capacity when the crystallinity is already high. In this work, by heat-stretching a highly crystalline microfiber, a significant k enhancement is observed. More interestingly, it coincides with a reduction in crystallinity. The sample is a Spectra S-900 ultrahigh-molecular-weight polyethylene (UHMW-PE) microfiber of 92% crystallinity and high degree of orientation. The optimum stretching condition is 131.5 °C, with a strain rate of 0.0129 s-1 to a low strain ratio (∼6.6) followed by air quenching. The k enhancement is from 21 to 51 W/(m·K), the highest value for UHMW-PE microfibers reported to date. X-ray diffraction study finds that the crystallinity reduces to 83% after stretching, whereas the crystallite size and crystallite orientation are not changed. Cryogenic thermal characterization shows a reduced level of phonon-defect scattering near 30 K. Polarization Raman spectroscopy finds enhanced alignment of amorphous chains, which could be the main reason for the k enhancement. A possible relocation of amorphous phase is also discussed and indirectly supported by a bending test.

| S-EPMC6641735 | biostudies-literature

Atomically Thin Amorphous Indium-Oxide Semiconductor Film Developed Using a Solution Process for High-Performance Oxide Transistors.

Project description:High-performance oxide transistors have recently attracted significant attention for use in various electronic applications, such as displays, sensors, and back-end-of-line transistors. In this study, we demonstrate atomically thin indium-oxide (InOx) semiconductors using a solution process for high-performance thin-film transistors (TFTs). To achieve superior field-effect mobility and switching characteristics in TFTs, the bandgap and thickness of the InOx were tuned by controlling the InOx solution molarity. As a result, a high field-effect mobility and on/off-current ratio of 13.95 cm2 V-1 s-1 and 1.42 × 1010, respectively, were achieved using 3.12-nanometer-thick InOx. Our results showed that the charge transport of optimized InOx with a thickness of 3.12 nm is dominated by percolation conduction due to its low surface roughness and appropriate carrier concentration. Furthermore, the atomically thin InOx TFTs showed superior positive and negative gate bias stress stabilities, which are important in electronic applications. The proposed oxide TFTs could provide an effective means of the fabrication of scalable, high-throughput, and high-performance transistors for next-generation electronic applications.

| S-EPMC10536517 | biostudies-literature

Electronic structures and unusually robust bandgap in an ultrahigh-mobility layered oxide semiconductor, Bi<sub>2</sub>O<sub>2</sub>Se.

Project description:Semiconductors are essential materials that affect our everyday life in the modern world. Two-dimensional semiconductors with high mobility and moderate bandgap are particularly attractive today because of their potential application in fast, low-power, and ultrasmall/thin electronic devices. We investigate the electronic structures of a new layered air-stable oxide semiconductor, Bi2O2Se, with ultrahigh mobility (~2.8 × 105 cm2/V?s at 2.0 K) and moderate bandgap (~0.8 eV). Combining angle-resolved photoemission spectroscopy and scanning tunneling microscopy, we mapped out the complete band structures of Bi2O2Se with key parameters (for example, effective mass, Fermi velocity, and bandgap). The unusual spatial uniformity of the bandgap without undesired in-gap states on the sample surface with up to ~50% defects makes Bi2O2Se an ideal semiconductor for future electronic applications. In addition, the structural compatibility between Bi2O2Se and interesting perovskite oxides (for example, cuprate high-transition temperature superconductors and commonly used substrate material SrTiO3) further makes heterostructures between Bi2O2Se and these oxides possible platforms for realizing novel physical phenomena, such as topological superconductivity, Josephson junction field-effect transistor, new superconducting optoelectronics, and novel lasers.

| S-EPMC6140625 | biostudies-literature

Two-Dimensional Iron Tungstate: A Ternary Oxide Layer With Honeycomb Geometry.

Project description:The exceptional physical properties of graphene have sparked tremendous interests toward two-dimensional (2D) materials with honeycomb structure. We report here the successful fabrication of 2D iron tungstate (FeWO x ) layers with honeycomb geometry on a Pt(111) surface, using the solid-state reaction of (WO3)3 clusters with a FeO(111) monolayer on Pt(111). The formation process and the atomic structure of two commensurate FeWO x phases, with (2 × 2) and (6 × 6) periodicities, have been characterized experimentally by combination of scanning tunneling microscopy (STM), low-energy electron diffraction (LEED), X-ray photoelectron spectroscopy (XPS), and temperature-programmed desorption (TPD) and understood theoretically by density functional theory (DFT) modeling. The thermodynamically most stable (2 × 2) phase has a formal FeWO3 stoichiometry and corresponds to a buckled Fe2+/W4+ layer arranged in a honeycomb lattice, terminated by oxygen atoms in Fe-W bridging positions. This 2D FeWO3 layer has a novel structure and stoichiometry and has no analogues to known bulk iron tungstate phases. It is theoretically predicted to exhibit a ferromagnetic electronic ground state with a Curie temperature of 95 K, as opposed to the antiferromagnetic behavior of bulk FeWO4 materials.

| S-EPMC4838946 | biostudies-literature

High Mobility Thin Film Transistors Based on Amorphous Indium Zinc Tin Oxide.

Project description:Top-contact bottom-gate thin film transistors (TFTs) with zinc-rich indium zinc tin oxide (IZTO) active layer were prepared at room temperature by radio frequency magnetron sputtering. Sintered ceramic target was prepared and used for deposition from oxide powder mixture having the molar ratio of In2O3:ZnO:SnO2 = 2:5:1. Annealing treatment was carried out for as-deposited films at various temperatures to investigate its effect on TFT performances. It was found that annealing treatment at 350 °C for 30 min in air atmosphere yielded the best result, with the high field effect mobility value of 34 cm2/Vs and the minimum subthreshold swing value of 0.12 V/dec. All IZTO thin films were amorphous, even after annealing treatment of up to 350 °C.

| S-EPMC5551745 | biostudies-other

A high-mobility electronic system at an electrolyte-gated oxide surface.

Project description:Electrolyte gating is a powerful technique for accumulating large carrier densities at a surface. Yet this approach suffers from significant sources of disorder: electrochemical reactions can damage or alter the sample, and the ions of the electrolyte and various dissolved contaminants sit Angstroms from the electron system. Accordingly, electrolyte gating is well suited to studies of superconductivity and other phenomena robust to disorder, but of limited use when reactions or disorder must be avoided. Here we demonstrate that these limitations can be overcome by protecting the sample with a chemically inert, atomically smooth sheet of hexagonal boron nitride. We illustrate our technique with electrolyte-gated strontium titanate, whose mobility when protected with boron nitride improves more than 10-fold while achieving carrier densities nearing 10(14)?cm(-2). Our technique is portable to other materials, and should enable future studies where high carrier density modulation is required but electrochemical reactions and surface disorder must be minimized.

| S-EPMC4382703 | biostudies-literature

High mobility emissive organic semiconductor.

Project description:The integration of high charge carrier mobility and high luminescence in an organic semiconductor is challenging. However, there is need of such materials for organic light-emitting transistors and organic electrically pumped lasers. Here we show a novel organic semiconductor, 2,6-diphenylanthracene (DPA), which exhibits not only high emission with single crystal absolute florescence quantum yield of 41.2% but also high charge carrier mobility with single crystal mobility of 34 cm(2) V(-1) s(-1). Organic light-emitting diodes (OLEDs) based on DPA give pure blue emission with brightness up to 6,627 cd m(-2) and turn-on voltage of 2.8 V. 2,6-Diphenylanthracene OLED arrays are successfully driven by DPA field-effect transistor arrays, demonstrating that DPA is a high mobility emissive organic semiconductor with potential in organic optoelectronics.

| S-EPMC4686665 | biostudies-literature

Direct Imaging of Ion Migration in Amorphous Oxide Electronic Synapses with Intrinsic Analog Switching Characteristics.

Project description:Amorphous metal oxides with analog resistive switching functions (i.e., continuous controllability of the electrical resistance) are gaining emerging interest due to their neuromorphic functionalities promising for energy efficient electronics. The mechanisms are currently attributed to field-driven migration of the constituent ions, but the applications are being hindered by the limited understanding of the physical mechanisms due to the difficulty in analyzing the causal ion migration, which occurs on a nanometer or even atomic scale. Here, the direct electrical transport measurement of analog resistive switching and ångström scale imaging of the causal ion migration is demonstrated in amorphous TaOx (a-TaOx) by conductive atomic force microscopy. Atomically flat thin films of a-TaOx, which is a practical material for commercial resistive random access memory, are fabricated in this study, and the mechanisms of the three known types of analog resistive switching phenomena (current-dependent set, voltage-dependent reset, and time-dependent switching) are directly visualized on the surfaces. The observations indicate that highly analog type of resistive switching can be induced in a-TaOx by inducing the continuous redox reactions for 2.0 < x < 2.5, which are characteristic of a-TaOx. The measurements also demonstrate drastic control of the switching stochasticity, which is attributable to controlled segregation of a metastable a-TaO2 phase. The findings provide direct clues for tuning the analog resistive switching characteristics of amorphous metal oxides and developing new functions for future neuromorphic computing.

| S-EPMC10080533 | biostudies-literature

Amorphous oxide alloys as interfacial layers with broadly tunable electronic structures for organic photovoltaic cells.

Project description:In diverse classes of organic optoelectronic devices, controlling charge injection, extraction, and blocking across organic semiconductor-inorganic electrode interfaces is crucial for enhancing quantum efficiency and output voltage. To this end, the strategy of inserting engineered interfacial layers (IFLs) between electrical contacts and organic semiconductors has significantly advanced organic light-emitting diode and organic thin film transistor performance. For organic photovoltaic (OPV) devices, an electronically flexible IFL design strategy to incrementally tune energy level matching between the inorganic electrode system and the organic photoactive components without varying the surface chemistry would permit OPV cells to adapt to ever-changing generations of photoactive materials. Here we report the implementation of chemically/environmentally robust, low-temperature solution-processed amorphous transparent semiconducting oxide alloys, In-Ga-O and Ga-Zn-Sn-O, as IFLs for inverted OPVs. Continuous variation of the IFL compositions tunes the conduction band minima over a broad range, affording optimized OPV power conversion efficiencies for multiple classes of organic active layer materials and establishing clear correlations between IFL/photoactive layer energetics and device performance.

| S-EPMC4491778 | biostudies-literature

Transparent heater with meshed amorphous oxide/metal/amorphous oxide for electric vehicle applications.

Project description:For electric vehicle application, one of the problems to be solved is defrosting or defogging a windshield or a side mirror without gas-fired heaters. In this paper, we report on a high performance of transparent heater with meshed amorphous-SiInZnO (SIZO)/ Ag/ amorphous-SiInZnO (SIZO) (SAS) for pure electric vehicles. We have adopted amorphous oxide materials like SIZO since SIZO is well known amorphous oxide materials showing high transparency and smooth surface roughness. With the mesh processing technology, a transparent electrode with high transmittance of 91% and low sheet resistance of 13.8 Ω/ϒ was implemented. When a 10 V supply voltage is applied to transparent heater, the transparent heater on glass substrate was heated up to 130oC in just 5 seconds and then reached to 250oC after tens of seconds due to the low sheet resistance. In addition, the SAS transparent meshed heater (TMH) showed high stability under cycling test and long time working stability test.

| S-EPMC7297967 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data