Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Impact of ultrasonic dispersion on the photocatalytic activity of titania aggregates.

ABSTRACT: The effectiveness of photocatalytic materials increases with the specific surface area, thus nanoscale photocatalyst particles are preferred. However, such nanomaterials are frequently found in an aggregated state, which may reduce the photocatalytic activity due to internal obscuration and the extended diffusion path of the molecules to be treated. This paper investigates the effect of aggregate size on the photocatalytic activity of pyrogenic titania (Aeroxide(®) P25, Evonik), which is widely used in fundamental photocatalysis research. Well-defined and reproducible aggregate sizes were achieved by ultrasonic dispersion. The photocatalytic activity was examined by the color removal of methylene blue (MB) with a laboratory-scale setup based on a plug flow reactor (PFR) and planar UV illumination. The process parameters such as flow regime, optical path length and UV intensity are well-defined and can be varied. Our results firstly show that a complete dispersion of the P25 aggregates is not practical. Secondly, the photocatalytic activity is not further increased beyond a certain degree of dispersion, which probably corresponds to a critical size for which UV irradiation can penetrate the aggregate without significant obscuration.

SUBMITTER: Le HN

PROVIDER: S-EPMC4685913 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Recyclable Magnetic Titania Nanocomposite from Ilmenite with Enhanced Photocatalytic Activity.

Project description:Using ilmenite as a raw material, iron was converted into Fe?O? magnetic fluid, which further was combined with titanium filtrate by a solvothermal method. Finally Fe?O?/TiO? nanocomposites with the uniform size of 100-200 nm were prepared. This approach uses rich, inexpensive ilmenite as a titanium and iron source, which effectively reduces the production cost. The crystal structure, chemical properties and morphologies of the products were characterized by SEM, TEM, XRD, FTIR, BET, UV-Vis, XPS and VSM. The novel photocatalyst composed of face-centered cubic Fe?O? and body-centered tetragonal anatase-TiO? exhibits a spherical shape with porous structures, superparamagnetic behavior and strong absorption in the visible light range. Using the degradation reaction of Rhodamine B (RhB) to evaluate the photocatalytic performance, the results suggest that Fe?O?/TiO? nanocomposites exhibit excellent photocatalytic activities and stability under visible light and solar light. Moreover, the magnetic titania nanocomposites displayed good magnetic response and were recoverable over several cycles. Based on the trapping experiments, the main active species in the photocatalytic reaction were confirmed and the possible photocatalytic mechanism of RhB with magnetic titania was proposed. The enhanced photocatalytic activity and stability, combined with excellent magnetic recoverability, make the prepared nanocomposite a potential candidate in wastewater purification.

| S-EPMC6149852 | biostudies-other

Carbon/Graphene-Modified Titania with Enhanced Photocatalytic Activity under UV and Vis Irradiation.

Project description:Laser synthesis was used for one-step synthesis of titania/graphene composites (G-TiO2 (C)) from a suspension of 0.04 wt% commercial reduced graphene oxide (rGO) dispersed in liquid titanium tetraisopropoxide (TTIP). Reference titania sample (TiO2(C)) was prepared by the same method without graphene addition. Both samples and commercial titania P25 were characterized by various methods and tested under UV/vis irradiation for oxidative decomposition of acetic acid and dehydrogenation of methanol (with and without Pt co-catalyst addition), and under vis irradiation for phenol degradation and inactivation of Escherichia coli. It was found that both samples (TiO2(C) and G-TiO2(C)) contained carbon resulting from TTIP and C2H4 (used as a synthesis sensitizer), which activated titania towards vis activity. The photocatalytic activity under UV/vis irradiation was like that by P25. The highest activity of TiO2(C) sample for acetic acid oxidation was probably caused by its surface enrichment with hydroxyl groups. G-TiO2(C) was the most active for methanol dehydrogenation in the absence of platinum (ca. five times higher activity than that by TiO2(C) and P25), suggesting that graphene works as a co-catalyst for hydrogen evolution. High activity under both UV and vis irradiation for decomposition of organic compounds, hydrogen evolution and inactivation of bacteria suggests that laser synthesis allows preparation of cheap (carbon-modified) and efficient photocatalysts for broad environmental applications.

| S-EPMC6947090 | biostudies-literature

Liquid-Plasma Hydrogenated Synthesis of Gray Titania with Engineered Surface Defects and Superior Photocatalytic Activity.

Project description:Defect engineering in photocatalysts recently exhibits promising performances in solar-energy-driven reactions. However, defect engineering techniques developed so far rely on complicated synthesis processes and harsh experimental conditions, which seriously hinder its practical applications. In this work, we demonstrated a facile mass-production approach to synthesize gray titania with engineered surface defects. This technique just requires a simple liquid-plasma treatment under low temperature and atmospheric pressure. The in situ generation of hydrogen atoms caused by liquid plasma is responsible for hydrogenation of TiO2. Electron paramagnetic resonance (EPR) measurements confirm the existence of surface oxygen vacancies and Ti3+ species in gray TiO2-x. Both kinds of defects concentrations are well controllable and increase with the output plasma power. UV-Vis diffused reflectance spectra show that the bandgap of gray TiO2-x is 2.9 eV. Due to its extended visible-light absorption and engineered surface defects, gray TiO2-x exhibits superior visible-light photoactivity. Rhodamine B was used to evaluate the visible-light photodegradation performance, which shows that the removal rate constant of gray TiO2-x reaches 0.126 min-1 and is 6.5 times of P25 TiO2. The surface defects produced by liquid-plasma hydrogenation are proved stable in air and water and could be a candidate hydrogenation strategy for other photocatalysts.

| S-EPMC7075135 | biostudies-literature

Development of Porous Titania Structure with Improved Photocatalytic Activity: Response Surface Modeling and Multi-Objective Optimization.

Project description:Porous titania was successfully synthesized by an ultrasound-assisted sol-gel route. The synthesis process was empirically modeled and optimized using the response surface methodology (RSM). Input variables adopted for optimization dealt with the weight ratio of precursors (r) and the sonication time (t), representing the used factors in the synthesis procedure. With regard to application, the synthesized TiO2 samples were tested for the photodegradation of two water-soluble organic pollutants under UV-Vis irradiation. Optimal conditions for the efficient pollutants' photodegradation were found to involve a precursors ratio of 3 and a sonication time of 60 min. Thus, the M5 sample prepared under the founded optimal conditions yielded the maximal removal efficiencies of 98.4% and 46.3% for the photodegradation of CR dye and 2,4-D herbicide, respectively. In addition, the photodegradation kinetics revealed the pseudo first-order rate constants, showing the photodegradation of CR (k1 = 8.86 × 10-2 min-1) by M5 sample is about 1.3-fold faster than the photodegradation of 2,4-D pesticide (k2 = 6.84 × 10-2 min-1).

| S-EPMC7279558 | biostudies-literature

Improving the Photocatalytic Activity of Mesoporous Titania Films through the Formation of WS2/TiO2 Nano-Heterostructures.

Project description:Heterostructures formed by anatase nanotitania and bidimensional semiconducting materials are expected to become the next-generation photocatalytic materials with an extended operating range and higher performances. The capability of fabricating optically transparent photocatalytic thin films is also a highly demanded technological issue, and increasing the performances of such devices would significantly impact several applications, from self-cleaning surfaces to photovoltaic systems. To improve the performances of such devices, WS2/TiO2 heterostructures obtained by incorporating two-dimensional transition metal dichalcogenides layers into titania mesoporous ordered thin films have been fabricated. The self-assembly process has been carefully controlled to avoid disruption of the order during film fabrication. WS2 nanosheets of different sizes have been exfoliated by sonication and incorporated in the mesoporous films via one-pot processing. The WS2 nanosheets result as well-dispersed within the titania anatase mesoporous film that retains a mesoporous ordered structure. An enhanced photocatalytic response due to an interparticle electron transfer effect has been observed. The structural characterization of the heterostructure has revealed a tight interplay between the matrix and nanosheets rather than a simple additive co-catalyst effect.

| S-EPMC9000319 | biostudies-literature

Size and shape distributions of primary crystallites in titania aggregates.

Project description:The primary crystallite size of titania powder relates to its properties in a number of applications. Transmission electron microscopy was used in this interlaboratory comparison (ILC) to measure primary crystallite size and shape distributions for a commercial aggregated titania powder. Data of four size descriptors and two shape descriptors were evaluated across nine laboratories. Data repeatability and reproducibility was evaluated by analysis of variance. One-third of the laboratory pairs had similar size descriptor data, but 83% of the pairs had similar aspect ratio data. Scale descriptor distributions were generally unimodal and were well-described by lognormal reference models. Shape descriptor distributions were multi-modal but data visualization plots demonstrated that the Weibull distribution was preferred to the normal distribution. For the equivalent circular diameter size descriptor, measurement uncertainties of the lognormal distribution scale and width parameters were 9.5% and 22%, respectively. For the aspect ratio shape descriptor, the measurement uncertainties of the Weibull distribution scale and width parameters were 7.0% and 26%, respectively. Both measurement uncertainty estimates and data visualizations should be used to analyze size and shape distributions of particles on the nanoscale.

| S-EPMC5709820 | biostudies-literature

Solvent-Free Ultrasonic Dispersion of Nanofillers in Epoxy Matrix.

Project description:Dispersion of carbon nanotubes and carbon nanofibers is a crucial processing step in the production of polymer-based nanocomposites and poses a great challenge due to the tendency of nanofillers to agglomerate. One of the most effective methods for dispersion is the use of a three-roll mill, which is a well-established method and results in agglomerates below 5 µm. Nevertheless, this process is time-consuming and thus a limiting factor for industrial applications. Our aim was to establish an easy and efficient ultrasonic dispersion process, characterize the dispersion parameters, and compare both methods, ultrasonication and the three-roll mill. We applied rheological tests and analyzed the agglomerate sizes by an image fit of the microscopy images. All these analyses combined deliver a valuable set of information about the dispersion's quality and, therefore, allows the improvement and further adaptation of the dispersion process.

| S-EPMC7835899 | biostudies-literature

Direct Writing of a Titania Foam in Microgravity for Photocatalytic Applications.

Project description:This work explores the potential for additive manufacturing to be used to fabricate ultraviolet light-blocking or photocatalytic materials with in situ resource utilization, using a titania foam as a model system. Direct foam writing was used to deposit titania-based foam lines in microgravity using parabolic flight. The wet foam was based on titania primary particles and a titania precursor (Ti (IV) bis(ammonium lactato) dihydroxide). Lines were also printed in Earth gravity and their resulting properties were compared with regard to average cross-sectional area, height, and width. The cross-sectional height was found to be higher when printing at low speeds in microgravity compared to Earth gravity, but lower when printing at high speeds in microgravity compared to Earth gravity. It was also observed that volumetric flow rate was generally higher when writing in Earth gravity compared to microgravity. Additionally, heterogeneous photocatalytic degradation of methylene blue was studied to characterize the foams for water purification and was found to generally increase as the foam heat treatment temperature increased. Optical and scanning electron microscopies were used to observe foam morphology. X-ray diffraction spectroscopy was used to study the change in crystallinity with respect to temperature. Contact angle of water was found to increase on the surface of the foam as ultraviolet light exposure time increased. Additionally, the foam blocked more ultraviolet light over time when exposed to ultraviolet radiation. Finally, bubble coarsening measurements were taken to observe bubble radius growth over time.

| S-EPMC10571002 | biostudies-literature

Evidence-based guidelines for the ultrasonic dispersion of cellulose nanocrystals.

Project description:Nanoparticles possess unique, size-driven properties. However, they can be challenging to use as they easily agglomerate - their high surface area-to-volume ratio induces strong interparticle forces, generating agglomerates that are difficult to break. This issue prevails in organic particles as well, such as cellulose nanocrystals (CNCs); when in their dried form, strong hydrogen bonding enhances agglomeration. Ultrasonication is widely applied to prepare CNC suspensions, but the methodology employed is non-standardized and typically under-reported, and process efficiency is unknown. This limits the ability to adapt dispersion protocols at industrial scales. Herein, numerical simulations are used in conjunction with validation experiments to define and optimize key parameters for ultrasonic dispersion of CNCs, allowing an operating window to be inferred.

| S-EPMC7786632 | biostudies-literature

Data on the effect of the dispersion of functionalized nanoparticles TiO2 with photocatalytic activity in LDPE.

Project description:This article contains the dataset referring to the article "Study of the effect of the dispersion of functionalized nanoparticles TiO2 with photocatalytic activity in LDPE" (Jahell et al., 2016) [1]. It includes the FT-IR data of the functionalized nanoparticles of TiO2 with Hexadecyltrimethoxysilane in different degrees of functionalization, thermogravimetric analysis, distribution and particle size in the polymer matrix by scanning electron microscopy (SEM), carbonyl index, gravimetry and scanning electron microscopy of the nanocomposite degraded by UV radiation.

| S-EPMC5752085 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data