Browse
Submit Data
Databases
API
Help

Dataset Information

41 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Micro/Nano hierarchical peony-like Al doped ZnO superhydrophobic film: The guiding effect of (100) preferred seed layer.

ABSTRACT: In this communication, we present a versatile and controllable strategy for formation of superhydrophobic micro/nano hierarchical Al doped ZnO (AZO) films with a water contact angle (CA) of 170?±?4°. This strategy involves a two-step layer-by-layer process employing an atomic layer deposition (ALD) technique followed by a hydrothermal method, and the resulting novel AZO surface layer consists of (100) dominant nano-rice-like AZO seed layer (the water CA of 110?±?4°) covered with micro-peony-like AZO top. The growth mechanisms and superhydrophobic properties of the hierarchical AZO layer are discussed. It is believed that the present route holds promise for future success in the design and development of practical superhydrophobic materials.

SUBMITTER: Li Y

PROVIDER: S-EPMC4709682 | biostudies-literature | 2016 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Micro/Nano hierarchical peony-like Al doped ZnO superhydrophobic film: The guiding effect of (100) preferred seed layer.

Li Yang Y Wang Jingfeng J Kong Yi Y Zhou Jia J Wu Jinzhu J Wang Gang G Bi Hai H Wu Xiaohong X Qin Wei W Li Qingkun Q

Scientific reports 20160112

In this communication, we present a versatile and controllable strategy for formation of superhydrophobic micro/nano hierarchical Al doped ZnO (AZO) films with a water contact angle (CA) of 170 ± 4°. This strategy involves a two-step layer-by-layer process employing an atomic layer deposition (ALD) technique followed by a hydrothermal method, and the resulting novel AZO surface layer consists of (100) dominant nano-rice-like AZO seed layer (the water CA of 110 ± 4°) covered with micro-peony-like ...[more]

PMID: 26753877

Similar Datasets

A Superhydrophobic Moso Bamboo Cellulose Nano-Fibril Film Modified by Dopamine Hydrochloride.

Project description:The moso bamboo fiber powder was used as raw material to prepare cellulose nano-fibril films, 5% of polyvinyl alcohol solution was used as a structural reinforcement agent, dopamine hydrochloride (DA) was used as a surface adhesive, and hexadecyl trimethoxy silane was used as a surface modifier. The superhydrophobic films were prepared by vacuum filtration and impregnation. The results showed that the water contact angle on the surface of the film could reach 156°. The microstructure and chemical composition of the film surface was further studied by scanning electron microscopy (SEM), Fourier transforms infrared spectroscopy (FTIR), and roughness measurement The scanning electron microscopy images showed that the nanofibers on the surface of Cellulose nanofibers film were arranged and randomly distributed, thus forming a dense network interwoven structure. In PDA hydrophobic modification solution, an Hexadecyltrimethoxysilane was hydrolyzed to a hexadecyl silanol to obtain the polar terminal hydroxyl of Hexadecyl silanol molecule. The -OCH3 terminal group of HDTMS reacted with hydroxyl/H2O to form a silanol (Si-OH) bond and further condensed to form a Si-O-Si network. In addition, due to the hydrophilicity of the surface of the nano cellulose film, a large amount of-OH was adsorbed on the surface of the nano cellulose film, resulted in the chemical connection between cetyl groups, thus realized the grafting of cetyl long-chain alkyl groups onto the fibers of the nano cellulose film.The film showed good self-cleaning and waterproof properties, which can be widely used in wet environment packaging and building.

| S-EPMC8563781 | biostudies-literature

A Stable and Indurative Superhydrophobic Film with Excellent Anti-Bioadhesive Performance for 6061 Al Protection.

Project description:Superhydrophobic surfaces have attracted intensive attention in the antifouling field because of their excellent anti-bioadhesive performance and environmental friendliness. However, promising surfaces have met great challenges of poor mechanical robustness under harsh serving conditions. Herein, an organic-inorganic composite strategy, that the silane-modified TiO2 nanoparticles are compounded into the porous framework provided by the stable and indurative aluminum oxide film, is proposed to address the common serious problem in superhydrophobic surfaces. Different from the traditional superhydrophobic surfaces, this composite film possesses a ~18 μm thick layer which can provide strong support to silane-modified TiO2 nanoparticles. The resulting film can reserve superhydrophobicity to the surface even after a thickness loss of ~15 μm under continuous abrasion. At the same time, the results of the bacterial adhesive tests also verify that the film has the same long-term anti-bioadhesive performance. The film with superhydrophobicity, excellent anti-bioadhesive property, and stable robustness will make it a promising candidate for serving in a harsh environment, and the design concept of this film could be applied to various substrates.

| S-EPMC7731204 | biostudies-literature

Tuning the Superhydrophobic Properties of Hierarchical Nano-microstructural Silica Biomorph Arrays Grown at Triphasic Interfaces.

Project description:The three-dimensional hierarchical morphology of surfaces greatly affects the wettability, absorption and microfabrication properties of their hybrid materials, however few scalable methods exist that controls simultaneously complex geometric shape and spatial scattered location and their physical properties tuned. Consequently, this report describes a synthetic strategy that enables the position of well-ordered biomorph nano-microstructures on hydrophobic surfaces to be precisely controlled. The hierarchical architecture can be accurately positioned on polydimethylsiloxane (PDMS) surfaces in an unprecedented level by leveraging a solid/liquid/gas triphase dynamic reaction diffusion system strategy. The effect of salt concentrations, pH, CO2 levels, temperature and substrate patterning on this self-assembly process has been investigated, enabling protocols to be devised that enables the hydrophobic properties of the hierarchically assembled multiscale microstructures to be tuned as required. This combined top-down/bottom-up approach can be used to produce composites with outstanding hydrophobicity properties, affording superhydrophobic materials that are capable of retaining water droplets on their surfaces, even when the material is inverted by 180°, with a wide range of potential applications in oil/water separation technology and for selective cell recognition in biological systems.

| S-EPMC7067859 | biostudies-literature

UV sensing using film bulk acoustic resonators based on Au/n-ZnO/piezoelectric-ZnO/Al structure.

Project description:A new type of ultraviolet (UV) light sensor based on film bulk acoustic wave resonator (FBAR) is proposed. The new sensor uses gold and a thin n-type ZnO layer deposited on the top of piezoelectric layer of FBAR to form a Schottky barrier. The Schottky barrier's capacitance can be changed with UV light, resulting in an enhanced shift in the entire FBAR's resonant frequency. The fabricated UV sensor has a 50 nm thick n-ZnO semiconductor layer with a carrier concentration of ~ 10(17) cm(-3). A large frequency downshift is observed when UV light irradiates the FBAR. With 365 nm UV light of intensity 1.7 mW/cm(2), the FBAR with n-ZnO/Au Schottky diode has 250 kHz frequency downshift, much larger than the 60 kHz frequency downshift in a conventional FBAR without the n-ZnO layer. The shift in the new FBAR's resonant frequency is due to the junction formed between Au and n-ZnO semiconductor and its properties changes with UV light. The experimental results are in agreement with the theoretical analysis using an equivalent circuit model of the new FBAR structure.

| S-EPMC4360626 | biostudies-other

Understanding of mobility limiting factors in solution grown Al doped ZnO thin film and its low temperature remedy.

Project description:The solution grown doped ZnO based transparent electrode has shown great potential in future generation flexible and smart devices due to its abundance in earth, low cost, simple and low temperature synthesis process. But solution grown doped ZnO possesses one major drawback, its mobility decreases rapidly with an increase in doping concentration. To eliminate this issue, the understanding of factors that limiting mobility is a prerequisite. But till date, there are very limited resources with detailed understanding of mobility limiting factors in solution grown TCO. Here in this report, with the morphological, optical and electrical investigations, the mobility limiting factor comes out to be surface related property and assigned to be the defects related to surface adsorbed oxygen and oxygen species at the surface. Furthermore, we have modified the surface to remove the surface adsorbed oxygen species by a low temperature (70 °C) simple solution process. Surface modified sample shows more than two orders of improvement in resistivity without any significant change in the transparency in visible range.

| S-EPMC9573931 | biostudies-literature

Selective antibiofilm properties and biocompatibility of nano-ZnO and nano-ZnO/Ag coated surfaces.

Project description:Spread of pathogenic microbes and antibiotic-resistant bacteria in health-care settings and public spaces is a serious public health challenge. Materials that prevent solid surface colonization or impede touch-transfer of viable microbes could provide means to decrease pathogen transfer from high-touch surfaces in critical applications. ZnO and Ag nanoparticles have shown great potential in antimicrobial applications. Less is known about nano-enabled surfaces. Here we demonstrate that surfaces coated with nano-ZnO or nano-ZnO/Ag composites are not cytotoxic to human keratinocytes and possess species-selective medium-dependent antibiofilm activity against Escherichia coli, Staphylococcus aureus and Candida albicans. Colonization of nano-ZnO and nano-ZnO/Ag surfaces by E. coli and S. aureus was decreased in static oligotrophic conditions (no planktonic growth). Moderate to no effect was observed for bacterial biofilms in growth medium (supporting exponential growth). Inversely, nano-ZnO surfaces enhanced biofilm formation by C. albicans in oligotrophic conditions. However, enhanced C. albicans biofilm formation on nano-ZnO surfaces was effectively counteracted by the addition of Ag. Possible selective enhancement of biofilm formation by the yeast C. albicans on Zn-enabled surfaces should be taken into account in antimicrobial surface development. Our results also indicated the importance of the use of application-appropriate test conditions and exposure medium in antimicrobial surface testing.

| S-EPMC7417576 | biostudies-literature

Aligned hierarchical Ag/ZnO nano-heterostructure arrays via electrohydrodynamic nanowire template for enhanced gas-sensing properties.

Project description:Gas sensing performance can be improved significantly by the increase in both the effective gas exposure area and the surface reactivitiy of ZnO nanorods. Here, we propose aligned hierarchical Ag/ZnO nano-heterostructure arrays (h-Ag/ZnO-NAs) via electrohydrodynamic nanowire template, together with a subsequent hydrothermal synthesis and photoreduction reaction. The h-Ag/ZnO-NAs scatter at top for higher specific surface areas with the air, simultaneously contact at root for the electrical conduction. Besides, the ZnO nanorods are uniformly coated with dispersed Ag nanoparticles, resulting in a tremendous enhancement of the surface reactivity. Compared with pure ZnO, such h-Ag/ZnO-NAs exhibit lower electrical resistance and faster responses. Moreover, they demonstrate enhanced NO2 gas sensing properties. Self-assembly via electrohydrodynamic nanowire template paves a new way for the preparation of high performance gas sensors.

| S-EPMC5610263 | biostudies-other

Facile fabrication of superhydrophobic surfaces with hierarchical structures.

Project description:Hierarchical structures were fabricated on the surfaces of SUS304 plates using a one-step process of direct microwave irradiation under a carbon dioxide atmosphere. The surface nanostructures were composed of chrome-doped hematite single crystals. Superhydrophobic surfaces with a water contact angle up to 169° were obtained by chemical modification of the hierarchical structures. The samples maintained superhydrophobicity under NaCl solution up to 2 weeks.

| S-EPMC5840334 | biostudies-literature

Application of ZnO-Nd Nano-Photocatalyst for the Reactive Red 198 Dye Decolorization in the Falling-Film Photocatalytic Reactor.

Project description:A large amount of Reactive red 198 (RR198) is released yearly into the environment. RR198 is toxic for human and aquatic creatures; therefore, it should be removed from wastewater before releasing into the environment. In this study, the nano ZnO-Nd -photo-catalyst for the first time was synthesized by the combustion method. First, the physical characteristics of the generated nano photocatalyst were evaluated using FESEM, XRD, Bandgap calculation, and FTIR analysis. Then, the ZnO-Nd nano-photocatalyst was suspended into the contaminated water with RR198 dye in a falling-film photocatalytic reactor. The effects of parameters such as the amount of H2O2, catalyst dose, pH, and initial concentration of dye were investigated during the experiments. Finally, the decolorization process with the falling-film photocatalytic reactor was optimized using response surface methodology (RSM). The physical characteristics showed that the average particle size of the synthesized ZnO-Nd was 40 nm. Doping ZnO with Nd reduced the photocatalyst energy bandgap by 14%. The results indicated that the optimum amount of catalyst dose and pH level was 0.1 g/L and 5, respectively. The simultaneous usage of H2O2 and ZnO-Nd with an H2O2/dye ratio of two increased dye removal performance by 90%. The results demonstrated that the developed equations can be applied to predict the performance of the falling-film photoreactor. This study showed that using the nano ZnO-Nd photocatalyst in a falling-film photocatalytic reactor under optimum operating conditions is an appropriate way to remove RR198 from water.

| S-EPMC8540491 | biostudies-literature

Reliability enhancement in thin film transistors using Hf and Al co-incorporated ZnO active channels deposited by atomic-layer-deposition.

Project description:Oxide thin films transistors (TFTs) with Hf and Al co-incorporated ZnO active channels prepared by atomic-layer deposition are presented. The Al concentration was fixed at 2.6 at% and the Hf concentration was varied from 3.3 to 6.3 at%. The HfAlZnO (HAZO) TFTs exhibited positive shifts in turn on voltages toward 0 V with a slight decrease in carrier mobility with increases in the incorporated Hf content and the post-annealing temperature. It was suggested that the carrier concentration and defect densities within the HAZO channels were reduced by incorporating Hf and performing the thermal annealing process. The TFT with HAZO channels with Hf content of 6.3 at% exhibited a turn-on operation at around 0 V and a low SS value of 0.3 V dec-1 without a marked decrease in carrier mobility. Furthermore, the device stabilities under bias, illumination, and temperature stresses could be greatly enhanced by reducing the formation of additional carriers and defects caused by weak Zn-O bonds due to the high binding energy of Hf with oxygen.

| S-EPMC9086866 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data