Browse
Submit Data
Databases
API
Help

Dataset Information

5 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Conductance tomography of conductive filaments in intrinsic silicon-rich silica RRAM.

ABSTRACT: We present results from an imaging study of filamentary conduction in silicon suboxide resistive RAM devices. We used a conductive atomic force microscope to etch through devices while measuring current, allowing us to produce tomograms of conductive filaments. To our knowledge this is the first report of such measurements in an intrinsic resistance switching material.

SUBMITTER: Buckwell M

PROVIDER: S-EPMC4718172 | biostudies-literature | 2015 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Conductance tomography of conductive filaments in intrinsic silicon-rich silica RRAM.

Buckwell Mark M Montesi Luca L Hudziak Stephen S Mehonic Adnan A Kenyon Anthony J AJ

Nanoscale 20151101 43

We present results from an imaging study of filamentary conduction in silicon suboxide resistive RAM devices. We used a conductive atomic force microscope to etch through devices while measuring current, allowing us to produce tomograms of conductive filaments. To our knowledge this is the first report of such measurements in an intrinsic resistance switching material. ...[more]

PMID: 26482563

Similar Datasets

Plasmon-induced nanoscale quantised conductance filaments.

Project description:Plasmon-induced phenomena have recently attracted considerable attention. At the same time, relatively little research has been conducted on electrochemistry mediated by plasmon excitations. Here we report plasmon-induced formation of nanoscale quantized conductance filaments within metal-insulator-metal heterostructures. Plasmon-enhanced electromagnetic fields in an array of gold nanodots provide a straightforward means of forming conductive CrOx bridges across a thin native chromium oxide barrier between the nanodots and an underlying metallic Cr layer. The existence of these nanoscale conducting filaments is verified by transmission electron microscopy and contact resistance measurements. Their conductance was interrogated optically, revealing quantised relative transmission of light through the heterostructures across a wavelength range of 1-12??m. Such plasmon-induced electrochemical processes open up new possibilities for the development of scalable devices governed by light.

| S-EPMC5460164 | biostudies-literature

Geometric conductive filament confinement by nanotips for resistive switching of HfO2-RRAM devices with high performance.

Project description:Filament-type HfO2-based RRAM has been considered as one of the most promising candidates for future non-volatile memories. Further improvement of the stability, particularly at the "OFF" state, of such devices is mainly hindered by resistance variation induced by the uncontrolled oxygen vacancies distribution and filament growth in HfO2 films. We report highly stable endurance of TiN/Ti/HfO2/Si-tip RRAM devices using a CMOS compatible nanotip method. Simulations indicate that the nanotip bottom electrode provides a local confinement for the electrical field and ionic current density; thus a nano-confinement for the oxygen vacancy distribution and nano-filament location is created by this approach. Conductive atomic force microscopy measurements confirm that the filaments form only on the nanotip region. Resistance switching by using pulses shows highly stable endurance for both ON and OFF modes, thanks to the geometric confinement of the conductive path and filament only above the nanotip. This nano-engineering approach opens a new pathway to realize forming-free RRAM devices with improved stability and reliability.

| S-EPMC4867633 | biostudies-literature

Electrically conductive and optically active porous silicon nanowires.

Project description:We report the synthesis of vertical silicon nanowire array through a two-step metal-assisted chemical etching of highly doped n-type silicon (100) wafers in a solution of hydrofluoric acid and hydrogen peroxide. The morphology of the as-grown silicon nanowires is tunable from solid nonporous nanowires, nonporous/nanoporous core/shell nanowires, to entirely nanoporous nanowires by controlling the hydrogen peroxide concentration in the etching solution. The porous silicon nanowires retain the single crystalline structure and crystallographic orientation of the starting silicon wafer and are electrically conductive and optically active with visible photoluminescence. The combination of electronic and optical properties in the porous silicon nanowires may provide a platform for novel optoelectronic devices for energy harvesting, conversion, and biosensing.

| S-EPMC2810957 | biostudies-literature

Quantum conductance in silicon oxide resistive memory devices.

Project description:Resistive switching offers a promising route to universal electronic memory, potentially replacing current technologies that are approaching their fundamental limits. In many cases switching originates from the reversible formation and dissolution of nanometre-scale conductive filaments, which constrain the motion of electrons, leading to the quantisation of device conductance into multiples of the fundamental unit of conductance, G0. Such quantum effects appear when the constriction diameter approaches the Fermi wavelength of the electron in the medium - typically several nanometres. Here we find that the conductance of silicon-rich silica (SiOx) resistive switches is quantised in half-integer multiples of G0. In contrast to other resistive switching systems this quantisation is intrinsic to SiOx, and is not due to drift of metallic ions. Half-integer quantisation is explained in terms of the filament structure and formation mechanism, which allows us to distinguish between systems that exhibit integer and half-integer quantisation.

| S-EPMC3776960 | biostudies-literature

Electrically Conductive Polyetheretherketone Nanocomposite Filaments: From Production to Fused Deposition Modeling.

Project description:The present work reports the production and characterization of polyetheretherketone (PEEK) nanocomposite filaments incorporating carbon nanotubes (CNT) and graphite nanoplates (GnP), electrically conductive and suitable for fused deposition modeling (FDM) processing. The nanocomposites were manufactured by melt mixing and those presenting electrical conductivity near 10 S/m were selected for the production of filaments for FDM. The extruded filaments were characterized for mechanical and thermal conductivity, polymer crystallinity, thermal relaxation, nanoparticle dispersion, thermoelectric effect, and coefficient of friction. They presented electrical conductivity in the range of 1.5 to 13.1 S/m, as well as good mechanical performance and higher thermal conductivity compared to PEEK. The addition of GnP improved the composites' melt processability, maintained the electrical conductivity at target level, and reduced the coefficient of friction by up to 60%. Finally, three-dimensional (3D) printed test specimens were produced, showing a Young's modulus and ultimate tensile strength comparable to those of the filaments, but a lower strain at break and electrical conductivity. This was attributed to the presence of large voids in the part, revealing the need for 3D printing parameter optimization. Finally, filament production was up-scaled to kilogram scale maintaining the properties of the research-scale filaments.

| S-EPMC6403709 | biostudies-literature

Operando characterization of conductive filaments during resistive switching in Mott VO2.

Project description:Vanadium dioxide (VO2) has attracted much attention owing to its metal-insulator transition near room temperature and the ability to induce volatile resistive switching, a key feature for developing novel hardware for neuromorphic computing. Despite this interest, the mechanisms for nonvolatile switching functioning as synapse in this oxide remain not understood. In this work, we use in situ transmission electron microscopy, electrical transport measurements, and numerical simulations on Au/VO2/Ge vertical devices to study the electroforming process. We have observed the formation of V5O9 conductive filaments with a pronounced metal-insulator transition and that vacancy diffusion can erase the filament, allowing for the system to "forget." Thus, both volatile and nonvolatile switching can be achieved in VO2, useful to emulate neuronal and synaptic behaviors, respectively. Our systematic operando study of the filament provides a more comprehensive understanding of resistive switching, key in the development of resistive switching-based neuromorphic computing.

| S-EPMC7936358 | biostudies-literature

Tin nanoparticles as an effective conductive additive in silicon anodes.

Project description:We have found that the addition of tin nanoparticles to a silicon-based anode provides dramatic improvements in performance in terms of both charge capacity and cycling stability. Using a simple procedure and off-the-shelf additives and precursors, we developed a structure in which the tin nanoparticles are segregated at the interface between the silicon-containing active layer and the solid electrolyte interface. Even a minor addition of tin, as small as ?2% by weight, results in a significant decrease in the anode resistance, as confirmed by electrochemical impedance spectroscopy. This leads to a decrease in charge transfer resistance, which prevents the formation of electrically inactive "dead spots" in the anode structure and enables the effective participation of silicon in the lithiation reaction.

| S-EPMC4971508 | biostudies-literature

Early silica crust formation in planetesimals by metastable silica-rich liquid immiscibility or cristobalite crystallisation: the possible origin of silica-rich chondrules.

Project description:The formation and differentiation processes of planetesimals-small bodies in the solar system-remain actively debated. Planetesimal differentiation is known to have occurred early (<1.5 Myr after the formation of Ca-Al-rich inclusions), as attested by the ages of iron meteorites. Metal-silicate segregation implies global-scale melting, induced by heat released from short-lived radiogenic isotopes, and the consequent generation of a silicate magma ocean. Thermodynamic calculations show that silicate magma crystallisation would have induced silicate-silicate differentiation, leading to the formation of a thick olivine-dominated "mantle" and a thin basaltic "crust". However, thermodynamic modelling of magma ocean crystallisation does not produce any silica phases. Here I experimentally show that crystallisation of a chondritic liquid does not follow the thermodynamically predicted path. Silica phases are generated early (before 55% differentiation) as a function of initial magma ocean temperature. As cristobalite or liquid silica phases are less dense than residual liquids or olivine, silica phases could have formed proto-crusts that would have acted as buoyant lids at the surfaces of planetesimals, allowing the eventual accretion and preservation of debris (chondrites). Moreover, the destruction of such a crust by impacts could provide an explanation for the origin of the silica reservoir that condensed around some chondrules.

| S-EPMC7075931 | biostudies-literature

Template?Free Electrochemical Formation of Silicon Nanotubes from Silica

Project description:Abstract Silicon, with its elaborate microstructure, plays important roles in energy materials. In operando engineering of microstructure during extraction is an ideal protocol to develop advanced Si?based materials. A template?free electrochemical preparation of silicon nanotubes (Si?NT) is herein achieved by co?electrolysis of SiO2 and AgCl in molten NaCl–CaCl2 at 850 °C. The in situ electrodeposited Ag facilitates the generation of a liquid Ag–Si intermediate, triggering a liquid–solid mechanism to direct the growth of Si?NT. An automatic separation of Ag from Si then occurs in the following cooling process, resulting in Ag deposits on the Ni current collector and recycling of Ag. Such a facile and smart preparation of Si?NT from affordable silica guarantees an enhanced current efficiency of 74%, a decreased energy consumption of 12.1 kW h kgSi?1, and enhanced lithium?storage capability of the electrolytic Si?NT. An in situ coating of Ag over the Si?NT can also be fulfilled by simply introducing soluble AgCl in the melts. The present study provides a template?free preparation and an in situ surface modification of Si?NT. A template?free preparation and in situ surface modification of silicon nanotubes is achieved by electrochemical reduction of SiO2 and AgCl in NaCl–CaCl2 molten salt. The elaborately designed process ensures enhanced production yield for massive Si extraction and enhanced lithium?storage capability of the electrolytic Si.

| S-EPMC7507395 | biostudies-literature

TEM Nanostructural Investigation of Ag-Conductive Filaments in Polycrystalline ZnO-Based Resistive Switching Devices.

Project description:Memristive devices based on a resistive switching mechanism are considered very promising for nonvolatile memory and unconventional computing applications, even though many details of the switching mechanisms are not yet fully understood. Here, we report a nanostructural study by means of high-resolution transmission electron microscopy and spectroscopy techniques of a Ag/ZnO/Pt memristive device. To ease the localization of the filament position for its characterization, we propose to use the guiding effect of regular perturbation arrays obtained by FIB technology to assist the filament formation. HRTEM and EDX were used to identify the composition and crystalline structure of the so-obtained conductive filaments and surrounding regions. It was determined that the conducting paths are composed mainly of monocrystalline Ag, which remains polycrystalline in some circumstances, including the zone where the switching occurs and at secondary filaments created at the grain boundaries of the polycrystalline ZnO matrix. We also observed that the ZnO matrix shows a degraded quality in the switching zone, while it remains unaltered in the rest of the memristive device.

| S-EPMC8008384 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data