Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Efficient Multiterminal Spectrum Splitting via a Nanowire Array Solar Cell.

ABSTRACT: Nanowire-based solar cells opened a new avenue for increasing conversion efficiency and rationalizing material use by growing different III-V materials on silicon substrates. Here, we propose a multiterminal nanowire solar cell design with a theoretical conversion efficiency of 48.3% utilizing an efficient lateral spectrum splitting between three different III-V material nanowire arrays grown on a flat silicon substrate. This allows choosing an ideal material combination to achieve the proper spectrum splitting as well as fabrication feasibility. The high efficiency is possible due to an enhanced absorption cross-section of standing nanowires and optimization of the geometric parameters. Furthermore, we propose a multiterminal contacting scheme that can be fabricated with a technology close to standard CMOS. As an alternative we also consider a single power source with a module level voltage matching. These new concepts open avenues for next-generation solar cells for terrestrial and space applications.

SUBMITTER: Dorodnyy A

PROVIDER: S-EPMC4727932 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Gold-Sensitized Silicon/ZnO Core/Shell Nanowire Array for Solar Water Splitting.

Project description:Solar water splitting represents one of the most promising strategies in the quest for clean and renewable energy. However, low conversion efficiency, use of sacrificial agents, and external bias for current water splitting system limit its practical application. Here, a gold-sensitized Si/ZnOcore/shell nanowire photoelectrochemical (PEC) cell is reported for efficient solar water oxidation. We demonstrated gold-sensitized n-Si/n-ZnO nanowire arrays exhibited higher energy conversion efficiency than gold-sensitized p-Si/n-ZnO nanowire arrays due to the favorable energy-band alignment characteristics. Without any assistance from an external electrical source and sacrificial reagents, gold-sensitized n-Si/n-ZnO core/shell nanowire array photoanode achieved unbiased water splitting under simulated solar light illumination. This method opens a promising venue to cost-efficient production of solar fuels.

| S-EPMC6456691 | biostudies-literature

A molecular tandem cell for efficient solar water splitting.

Project description:Artificial photosynthesis provides a way to store solar energy in chemical bonds. Achieving water splitting without an applied external potential bias provides the key to artificial photosynthetic devices. We describe here a tandem photoelectrochemical cell design that combines a dye-sensitized photoelectrosynthesis cell (DSPEC) and an organic solar cell (OSC) in a photoanode for water oxidation. When combined with a Pt electrode for H2 evolution, the electrode becomes part of a combined electrochemical cell for water splitting, 2H2O ? O2 + 2H2, by increasing the voltage of the photoanode sufficiently to drive bias-free reduction of H+ to H2 The combined electrode gave a 1.5% solar conversion efficiency for water splitting with no external applied bias, providing a mimic for the tandem cell configuration of PSII in natural photosynthesis. The electrode provided sustained water splitting in the molecular photoelectrode with sustained photocurrent densities of 1.24 mA/cm2 for 1 h under 1-sun illumination with no applied bias.

| S-EPMC7306789 | biostudies-literature

Design for strong absorption in a nanowire array tandem solar cell.

Project description:Semiconductor nanowires are a promising candidate for next-generation solar cells. However, the optical response of nanowires is, due to diffraction effects, complicated to optimize. Here, we optimize through optical modeling the absorption in a dual-junction nanowire-array solar cell in terms of the Shockley-Quessier detailed balance efficiency limit. We identify efficiency maxima that originate from resonant absorption of photons through the HE11 and the HE12 waveguide modes in the top cell. An efficiency limit above 40% is reached in the band gap optimized Al0.10Ga0.90As/In0.34Ga0.66As system when we allow for different diameter for the top and the bottom nanowire subcell. However, for experiments, equal diameter for the top and the bottom cell might be easier to realize. In this case, we find in our modeling a modest 1-2% drop in the efficiency limit. In the Ga0.51In0.49P/InP system, an efficiency limit of ??=?37.3% could be reached. These efficiencies, which include reflection losses and sub-optimal absorption, are well above the 31.0% limit of a perfectly-absorbing, idealized single-junction bulk cell, and close to the 42.0% limit of the idealized dual-junction bulk cell. Our results offer guidance in the choice of materials and dimensions for nanowires with potential for high efficiency tandem solar cells.

| S-EPMC5004118 | biostudies-literature

Synthesis of a single-crystal Fe2O3 nanowire array based on stress-induced atomic diffusion used for solar water splitting.

Project description:In this study, we successfully fabricated a single-crystal Fe2O3 nanowire array based on stress-induced atomic diffusion and used this array as the photoelectrode for solar water splitting. With the surface polishing treatment on the sample surface, the density of the Fe2O3 nanowire array reached up to 28.75?wire?µm-2 when heated for 90?min at 600°C. The photocurrent density of the optimized sample was 0.9?mA?cm-2 at 1.23?V versus a reversible hydrogen electrode in a three-electrode system under AM 1.5 G illumination. The incident photon-to-electron conversion efficiency was 6.8% at 400?nm.

| S-EPMC5882730 | biostudies-literature

Hydrogen-doped Brookite TiO<sub>2</sub> Nanobullets Array as a Novel Photoanode for Efficient Solar Water Splitting.

Project description:As a representative photocatalyst for photoelectrochemical solar water splitting, TiO2 has been intensively studied but most researches have focused on the rutile and anatsase phases because brookite, another important crystalline polymorph of TiO2, rarely exists in nature and is difficult to synthesize. In this work, hydrogen doped brookite (H:brookite) nanobullet arrays were synthesized via a well-designed solution reaction for the first time. H:brookite shows highly improved PEC properties with excellent stability, enhanced photocurrent, and significantly high Faradaic efficiency for overall solar water splitting. To support the experimental data, ab initio density functional theory calculations were also conducted. At the interstitial doping site that has minimum formation energy, the hydrogen atoms act as shallow donors and exist as H+. which has the minimum formation energy among three states of hydrogen (H+. H0, and H-). The calculated density of states of H:brookite shows a narrowed bandgap and an increased electron density compared to the pristine brookite. The combined experimental and theoretical results provide frameworks for the exploration of the PEC properties of doped brookite and extend our knowledge regarding the undiscovered properties of brookite of TiO2.

| S-EPMC5080591 | biostudies-literature

Resonant Nanophotonic Spectrum Splitting for Ultrathin Multijunction Solar Cells.

Project description:We present an approach to spectrum splitting for photovoltaics that utilizes the resonant optical properties of nanostructures for simultaneous voltage enhancement and spatial separation of different colors of light. Using metal-insulator-metal resonators commonly used in broadband metamaterial absorbers we show theoretically that output voltages can be enhanced significantly compared to single-junction devices. However, the approach is general and works for any type of resonator with a large absorption cross section. Due to its resonant nature, the spectrum splitting occurs within only a fraction of the wavelength, as opposed to traditional spectrum splitting methods, where many wavelengths are required. Combining nanophotonic spectrum splitting with other nanophotonic approaches to voltage enhancements, such as angle restriction and concentration, may lead to highly efficient but deeply subwavelength photovoltaic devices.

| S-EPMC4550012 | biostudies-literature

Single-crystalline, wormlike hematite photoanodes for efficient solar water splitting.

Project description:A hematite photoanode showing a stable, record-breaking performance of 4.32?mA/cm² photoelectrochemical water oxidation current at 1.23?V vs. RHE under simulated 1-sun (100?mW/cm²) irradiation is reported. This photocurrent corresponds to ca. 34% of the maximum theoretical limit expected for hematite with a band gap of 2.1?V. The photoanode produced stoichiometric hydrogen and oxygen gases in amounts close to the expected values from the photocurrent. The hematitle has a unique single-crystalline "wormlike" morphology produced by in-situ two-step annealing at 550°C and 800°C of ?-FeOOH nanorods grown directly on a transparent conducting oxide glass via an all-solution method. In addition, it is modified by platinum doping to improve the charge transfer characteristics of hematite and an oxygen-evolving co-catalyst on the surface.

| S-EPMC3775410 | biostudies-literature

Ultrathin metal-organic framework array for efficient electrocatalytic water splitting.

Project description:Two-dimensional metal-organic frameworks represent a family of materials with attractive chemical and structural properties, which are usually prepared in the form of bulk powders. Here we show a generic approach to fabricate ultrathin nanosheet array of metal-organic frameworks on different substrates through a dissolution-crystallization mechanism. These materials exhibit intriguing properties for electrocatalysis including highly exposed active molecular metal sites owning to ultra-small thickness of nanosheets, improved electrical conductivity and a combination of hierarchical porosity. We fabricate a nickel-iron-based metal-organic framework array, which demonstrates superior electrocatalytic performance towards oxygen evolution reaction with a small overpotential of 240?mV at 10?mA?cm-2, and robust operation for 20,000?s with no detectable activity decay. Remarkably, the turnover frequency of the electrode is 3.8?s-1 at an overpotential of 400?mV. We further demonstrate the promise of these electrodes for other important catalytic reactions including hydrogen evolution reaction and overall water splitting.

| S-EPMC5465318 | biostudies-literature

Performance Enhancement of Ultra-Thin Nanowire Array Solar Cells by Bottom Reflectivity Engineering.

Project description:A bottom-reflectivity-enhanced ultra-thin nanowire array solar cell is proposed and studied by 3D optoelectronic simulations. By inserting a small-index MgF2 layer between the polymer and substrate, the absorption is significantly improved over a broad wavelength range due to the strong reabsorption of light reflected at the polymer/MgF2 interface. With a 5 nm-thick MgF2 layer, the GaAs nanowire array solar cell with a height of 0.4-1 ?m yields a remarkable conversion efficiency ranging from 14% to 15.6%, significantly higher than conventional structures with a much larger height. Moreover, by inserting the MgF2 layer between the substrate and a part of the nanowire, in addition to between the substrate and polymer, the absorption of substrate right below the nanowire is further suppressed, leading to an optimal efficiency of 15.9%, 18%, and 5.4% for 1 ?m-high GaAs, InP, and Si nanowire solar cells, respectively. This work provides a simple and universal way to achieve low-cost high-performance nanoscale solar cells.

| S-EPMC7074864 | biostudies-literature

An Electrospun Porous CuBi2O4 Nanofiber Photocathode for Efficient Solar Water Splitting.

Project description:While the CuBi2O4-based photocathode has emerged as an ideal candidate for photoelectrochemical water splitting, it is still far from its theoretical values due to poor charge carrier transport, poor electron-hole separation, and instability caused by self-photoelectric-corrosion with electrolytes. Establishing synthesis methods to produce a CuBi2O4 photocathode with sufficient cocatalyst sites would be highly beneficial for water splitting. Here, the platinum-enriched porous CuBi2O4 nanofiber (CuBi2O4/Pt) with uniform coverage and high surface area was prepared as a photocathode through an electrospinning and electrodeposition process for water splitting. The prepared photocathode material was composed of a CuBi2O4 nanofiber array, which has a freestanding porous structure, and the Pt nanoparticle is firmly embedded on the rough surface. The highly porous nanofiber structures allow the cocatalyst (Pt) better alignment on the surface of CuBi2O4, which can effectively suppress the electron-hole recombination at the electrolyte interface. The as-fabricated CuBi2O4 nanofiber has a tetragonal crystal structure, and its band gap was determined to be 1.8 eV. The self-supporting porous structure and electrocatalytic activity of Pt can effectively promote the separation of electron-hole pairs, thus obtaining high photocurrent density (0.21 mA/cm2 at 0.6 V vs. RHE) and incident photon-to-current conversion efficiency (IPCE, 4% at 380 nm). This work shows a new view for integrating an amount of Pt nanoparticles with CuBi2O4 nanofibers and demonstrates the synergistic effect of cocatalysts for future solar water splitting.

| S-EPMC8512590 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data