Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Rapid mixing of viscous liquids by electrical coiling.

ABSTRACT: The control for the processing of precursor liquids determines whether the properties and functions of the final material product can be engineered. An inherent challenge of processing viscous liquids arises from their large resistance to deform. Here, we report on the discovery of an electric approach that can significantly contribute to address this challenge. The applied electric force can induce a straight viscous jet to coil, and the resulting coiling characteristics are governed by the electric stress. We demonstrate the promising use of electrical coiling in the rapid and efficient mixing of viscous liquids. Remarkably, the degree of mixing can be precisely adjusted by tuning the applied electric stress. Our approach of controlling the coiling electrically has important implications on applications such as dispensing and printing of resins, printing patterned surfaces and scaffolds, processing of food and generating non-woven fabrics.

SUBMITTER: Kong T

PROVIDER: S-EPMC4748218 | biostudies-literature | 2016 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Rapid mixing of viscous liquids by electrical coiling.

Kong Tiantian T Li Jingmei J Liu Zhou Z Zhou Zhuolong Z Ng Peter Hon Yu PH Wang Liqiu L Shum Ho Cheung HC

Scientific reports 20160210

The control for the processing of precursor liquids determines whether the properties and functions of the final material product can be engineered. An inherent challenge of processing viscous liquids arises from their large resistance to deform. Here, we report on the discovery of an electric approach that can significantly contribute to address this challenge. The applied electric force can induce a straight viscous jet to coil, and the resulting coiling characteristics are governed by the ele ...[more]

PMID: 26860660

Similar Datasets

Viscous Fingering of Miscible Liquids in Porous and Swellable Media for Rapid Diagnostic Tests.

Project description:In lateral flow and colorimetric test strip diagnostics, the effects of capillary action and diffusion on speed and sensitivity have been well studied. However, another form of fluid motion can be generated due to stresses and instabilities generated in pores when two miscible liquids with different densities and viscosities come into contact. This study explored how a swellable test pad can be deployed for measuring urea in saliva by partially prefilling the pad with a miscible solution of greater viscosity and density. The resultant Korteweg stresses and viscous fingering patterns were analyzed using solutions with added food color through video analysis and image processing. Image analysis was simplified using the saturation channel after converting RGB image sequences to HSB. The kinetics of liquid mixing agreed with capillary displacement results for miscible liquids undergoing movement from Korteweg stresses. After capillary filling, there was significant movement of liquid due to these fluidic effects, which led to mixing of the saliva sample with an enzyme test solution. Owing to the simplicity and speed of this test method, urea can be analyzed with an electronic nose over a useful range for detecting salivary urea concentration for rapid and early detection of dehydration.

| S-EPMC6315716 | biostudies-literature

On Viscous Flow in Glass-Forming Organic Liquids.

Project description:The two-exponential Sheffield equation of viscosity ?(T) = A1·T·[1 + A2·exp(Hm/RT)]·[1 + C·exp(Hd/RT)], where A1, A2, Hm, C, and Hm are material-specific constants, is used to analyze the viscous flows of two glass-forming organic materials-salol and ?-phenyl-o-cresol. It is demonstrated that the viscosity equation can be simplified to a four-parameter version: ?(T) = A·T·exp(Hm/RT)]·[1 + C·exp(Hd/RT)]. The Sheffield model gives a correct description of viscosity, with two exact Arrhenius-type asymptotes below and above the glass transition temperature, whereas near the Tg it gives practically the same results as well-known and widely used viscosity equations. It is revealed that the constants of the Sheffield equation are not universal for all temperature ranges and may need to be updated for very high temperatures, where changes occur in melt properties leading to modifications of A and Hm for both salol and ?-phenyl-o-cresol.

| S-EPMC7504771 | biostudies-literature

Dynamics of superparamagnetic nanoparticles in viscous liquids in rotating magnetic fields.

Project description:The dynamics of magnetic nanoparticles in a viscous liquid in a rotating magnetic field has been studied by means of numerical simulations and analytical calculations. In the magneto-dynamics approximation three different modes of motion of the unit magnetization vector and particle director are distinguished depending on frequency and amplitude of the rotating magnetic field. The specific absorption rate of a dilute assembly of superparamagnetic nanoparticles in rotating magnetic field is calculated by solving the Landau-Lifshitz stochastic equation for the unit magnetization vector and the stochastic equation for the particle director. At elevated frequencies an optimal range of particle diameters is found where the specific absorption rate of an assembly in a rotating magnetic field has a maximum. It is shown that with an optimal choice of the particle sizes sufficiently large SAR values of the order of 400-500 W/g can be obtained in a rotating magnetic field with a frequency f = 400 kHz and a moderate magnetic field amplitude H 0 = 100 Oe.

| S-EPMC6880845 | biostudies-literature

Homogeneous and Reproducible Mixing of Highly Viscous Biomaterial Inks and Cell Suspensions to Create Bioinks.

Project description:Highly viscous bioinks offer great advantages for the three-dimensional fabrication of cell-laden constructs by microextrusion printing. However, no standardised method of mixing a high viscosity biomaterial ink and a cell suspension has been established so far, leading to non-reproducible printing results. A novel method for the homogeneous and reproducible mixing of the two components using a mixing unit connecting two syringes is developed and investigated. Several static mixing units, based on established mixing designs, were adapted and their functionality was determined by analysing specific features of the resulting bioink. As a model system, we selected a highly viscous ink consisting of fresh frozen human blood plasma, alginate, and methylcellulose, and a cell suspension containing immortalized human mesenchymal stem cells. This bioink is crosslinked after fabrication. A pre-crosslinked gellan gum-based bioink providing a different extrusion behaviour was introduced to validate the conclusions drawn from the model system. For characterisation, bioink from different zones within the mixing device was analysed by measurement of its viscosity, shape fidelity after printing and visual homogeneity. When taking all three parameters into account, a comprehensive and reliable comparison of the mixing quality was possible. In comparison to the established method of manual mixing inside a beaker using a spatula, a significantly higher proportion of viable cells was detected directly after mixing and plotting for both bioinks when the mixing unit was used. A screw-like mixing unit, termed "HighVisc", was found to result in a homogenous bioink after a low number of mixing cycles while achieving high cell viability rates.

| S-EPMC8628813 | biostudies-literature

Water in the Electrical Double Layer of Ionic Liquids on Graphene.

Project description:The performance of electrochemical devices using ionic liquids (ILs) as electrolytes can be impaired by water uptake. This work investigates the influence of water on the behavior of hydrophilic and hydrophobic ILs─with ethylsulfate and tris(perfluoroalkyl)trifluorophosphate or bis(trifluoromethyl sulfonyl)imide (TFSI) anions, respectively─on electrified graphene, a promising electrode material. The results show that water uptake slightly reduces the IL electrochemical stability and significantly influences graphene's potential of zero charge, which is justified by the extent of anion depletion from the surface. Experiments confirm the dominant contribution of graphene's quantum capacitance (CQ) to the total interfacial capacitance (Cint) near the PZC, as expected from theory. Combining theory and experiments reveals that the hydrophilic IL efficiently screens surface charge and exhibits the largest double layer capacitance (CIL ∼ 80 μF cm-2), so that CQ governs the charge stored. The hydrophobic ILs are less efficient in charge screening and thus exhibit a smaller capacitance (CIL ∼ 6-9 μF cm-2), which governs Cint already at small potentials. An increase in the total interfacial capacitance is observed at positive voltages for humid TFSI-ILs relative to dry ones, consistent with the presence of a satellite peak. Short-range surface forces reveal the change of the interfacial layering with potential and water uptake owing to reorientation of counterions, counterion binding, co-ion repulsion, and water enrichment. These results are consistent with the charge being mainly stored in a ∼2 nm-thick double layer, which implies that ILs behave as highly concentrated electrolytes. This knowledge will advance the design of IL-graphene-based electrochemical devices.

| S-EPMC10210538 | biostudies-literature

Rapid mixing of sub-microlitre drops by magnetic micro-stirring.

Project description:We demonstrate rapid mixing of sub-microlitre droplets (250 nl) using miniaturized magnetic stir bars (400 ?m × 200 ?m × 15 ?m). The stir bars are fabricated using laser micromachining and placed on the substrate on which the drops are manipulated. They are activated by an externally applied magnetic field and used in combination with on-demand drop merging in enthalpy arrays. This technique results in a 10-fold increase in mixing rate, and a mixing time constant of about 2 s. Drop mixing times are measured by Förster resonance energy transfer (FRET) and verified by thermodynamic measurements of binding and enzymatic reactions.

| S-EPMC3278472 | biostudies-literature

Rapid, Self-driven Liquid Mixing on Open-Surface Microfluidic Platforms.

Project description:Self-driven surface micromixers (SDSM) relying on patterned-wettability technology provide an elegant solution for low-cost, point-of-care (POC) devices and lab-on-a-chip (LOC) applications. We present a SDSM fabricated by strategically patterning three wettable wedge-shaped tracks onto a non-wettable, flat surface. This SDSM operates by harnessing the wettability contrast and the geometry of the patterns to promote mixing of small liquid volumes (µL droplets) through a combination of coalescence and Laplace pressure-driven flow. Liquid droplets dispensed on two juxtaposed branches are transported to a coalescence station, where they merge after the accumulated volumes exceed a threshold. Further mixing occurs during capillary-driven, advective transport of the combined liquid over the third wettable track. Planar, non-wettable "islands" of different shapes are also laid on this third track to alter the flow in such a way that mixing is augmented. Several SDSM designs, each with a unique combination of island shapes and positions, are tested, providing a greater understanding of the different mixing regimes on these surfaces. The study offers design insights for developing low-cost surface microfluidic mixing devices on open substrates.

| S-EPMC5431963 | biostudies-literature

An asymmetric flow-focusing droplet generator promotes rapid mixing of reagents.

Project description:Nowadays droplet microfluidics is widely used to perform high throughput assays and for the synthesis of micro- and nanoparticles. These applications usually require packaging several reagents into droplets and their mixing to start a biochemical reaction. For rapid mixing microfluidic devices usually require additional functional elements that make their designs more complex. Here we perform a series of 2D numerical simulations, followed by experimental studies, and introduce a novel asymmetric flow-focusing droplet generator, which enhances mixing during droplet formation due to a 2D or 3D asymmetric vortex, located in the droplet formation area of the microfluidic device. Our results suggest that 2D numerical simulations can be used for qualitative analysis of two-phase flows and droplet generation process in quasi-two-dimensional devices, while the relative simplicity of such simulations allows them to be easily applied to fairly complicated microfluidic geometries. Mixing inside droplets formed in the asymmetric generator occurs up to six times faster than in a conventional symmetric one. The best mixing efficiency is achieved in a specific range of droplet volumes, which can be changed by scaling the geometry of the device. Thus, the droplet generator suggested here can significantly simplify designs of microfluidic devices because it enables both the droplet formation and fast mixing of the reagents within droplets. Moreover, it can be used to precisely estimate reaction kinetics.

| S-EPMC8062447 | biostudies-literature

Fabrication of Doxorubicin-Loaded Lipid-Based Nanocarriers by Microfluidic Rapid Mixing.

Project description:Doxorubicin (Dox) is a widely known chemotherapeutic drug that has been encapsulated into liposomes for clinical use, such as Doxil® and Myocet®. Both of these are prepared via remote loading methods, which require multistep procedures. Additionally, their antitumor efficacy is hindered due to the poor drug release from PEGylated liposomes in the tumor microenvironment. In this study, we aimed to develop doxorubicin-loaded lipid-based nanocarriers (LNC-Dox) based on electrostatic interaction using microfluidic technology. The resulting LNC-Dox showed high loading capacity, with a drug-to-lipid ratio (D/L ratio) greater than 0.2, and high efficacy of drug release in an acidic environment. Different lipid compositions were selected based on critical packing parameters and further studied to outline their effects on the physicochemical characteristics of LNC-Dox. Design of experiments was implemented for formulation optimization. The optimized LNC-Dox showed preferred release in acidic environments and better therapeutic efficacy compared to PEGylated liposomal Dox in vivo. Thus, this study provides a feasible approach to efficiently encapsulate doxorubicin into lipid-based nanocarriers fabricated by microfluidic rapid mixing.

| S-EPMC9219747 | biostudies-literature

Rapid photoacclimation during episodic deep mixing augments the biological carbon pump.

Project description:Episodic deep mixing events are one component of the biological carbon pump that physically transports organic carbon into the mesopelagic. Episodic deep mixing also disrupts summertime thermal stratification thereby changing the light field and nutrient concentrations available for phytoplankton growth. Phytoplankton survival and growth below the mixed layer following restratification depends on how rapidly cells can employ a variety of photoacclimation processes in response to the environmental changes. To compare the relative timescales of summertime episodic deep mixing events with the timescales of phytoplankton photoacclimation processes, we first analyzed autonomous float data to survey the frequency and magnitude of deep mixing events in the western North Atlantic Ocean. Next, we simulated a sustained deep mixing event in the laboratory and measured rates of acclimation processes ranging from light harvesting to growth in a model diatom and green alga. In both algae increases in chlorophyll (Chl) were coupled to growth, but growth of the green alga lagged the diatom by about a day. In float profiles, significant increases in Chl and phytoplankton carbon (C phyto) were detected below the mixed layer following episodic deep mixing events. These events pose a previously unrecognized source of new production below the mixed layer that can significantly boost the amount of carbon available for export to the deep ocean.

| S-EPMC8252461 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data