Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The role of nano-perovskite in the negligible thorium release in seawater from Greek bauxite residue (red mud).

ABSTRACT: We present new data about the chemical and structural characteristics of bauxite residue (BR) from Greek Al industry, using a combination of microscopic, analytical, and spectroscopic techniques. SEM-EDS indicated a homogeneous dominant "Al-Fe-Ca-Ti-Si-Na-Cr matrix", appearing at the microscale. The bulk chemical analyses showed considerable levels of Th (111 μg g(-1)), along with minor U (15 μg g(-1)), which are responsible for radioactivity (355 and 133 Bq kg(-1) for (232)Th and (238)U, respectively) with a total dose rate of 295 nGy h(-1). Leaching experiments, in conjunction with SF-ICP-MS, using Mediterranean seawater from Greece, indicated significant release of V, depending on S/L ratio, and negligible release of Th at least after 12 months leaching. STEM-EDS/EELS &HR-STEM-HAADF study of the leached BR at the nanoscale revealed that the significant immobility of Th(4+) is due to its incorporation into an insoluble perovskite-type phase with major composition of Ca(0.8)Na(0.2)TiO3 and crystallites observed in nanoscale. The Th L(III)-edge EXAFS spectra demonstrated that Th(4+) ions, which are hosted in this novel nano-perovskite of BR, occupy Ca(2+) sites, rather than Ti(4+) sites. That is most likely the reason of no Th release in Mediterranean seawater.

SUBMITTER: Gamaletsos PN

PROVIDER: S-EPMC4761986 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Synthesis of Scandium Phosphate after Peroxide Assisted Leaching of Iron Depleted Bauxite Residue (Red Mud) Slags.

Project description:Anticipated future demand and limited primary sources of Sc highlight the importance of secondary Sc resources such as bauxite residue (red mud). In this study, a process route starting from red mud aiming to recover Sc as a concentrate by a combination of pyrometallurgical and hydrometallurgical processes was developed. Bauxite residue was treated in an electric arc furnace (EAF) for Fe removal as well as slag conditioning with varying flux additions and various cooling conditions. 95% of iron recovery to the metal was achieved. Resulting slags were subjected to identical H2O2 supported H2SO4 leaching conditions at 75 °C. The effect of slag mineralogy and crystallinity on the leaching efficiencies were investigated using XRD and QEMSCAN analysis. As a result of the highly amorphous nature of acidic slags, maximum of 72% Sc leaching was obtained. For leached slags, water quenched basic slag was found to be the most promising condition resulting in an extreme Sc leaching yield of 97% and this slag was selected for the further Sc precipitation. High impurity removal rates and selective Sc separation were achieved with a triple-stage successive precipitation to synthesize a Sc concentrate. Starting from EAF treatment followed by leaching and precipitation, 85% of the initial Sc in the red mud was successfully recovered as Sc phosphate.

| S-EPMC6694154 | biostudies-literature

Evaluation of Main Factors for Improvement of the Scandium Leaching Process from Russian Bauxite Residue (Red Mud) in Carbonate Media.

Project description:The carbonate leaching of scandium from the landfilled bauxite residue (red mud) of the Bogoslovsky Aluminum Plant (Russia) and samples of red mud (RM) after alkaline pretreatment has been investigated. The results of kinetic studies allowing to compare and evaluate the effectiveness of different conditions and intensification factors in the process of scandium leaching from RM in carbonate/bicarbonate media are presented. It was determined that for 2.0 mol L-1 Na2CO3 leaching solution ultrasonic treatment under gas (CO2) carbonation conditions in the pH range of 9.5-10.0 allows reducing the scandium leaching time by two times and reaching 40-45% scandium extraction. Leaching of RM in carbonate/bicarbonate media is accompanied by secondary processes (adsorption, hydrolysis, and coprecipitation) leading to a decrease in scandium extraction. The obtained results allow improving understanding of scandium chemical behavior in complex aqueous carbonate/bicarbonate systems and can be used for the optimization of the alternative carbonate process for scandium extraction from RM.

| S-EPMC8757361 | biostudies-literature

Leaching of copper and nickel in soil-water systems contaminated by bauxite residue (red mud) from Ajka, Hungary: the importance of soil organic matter.

Project description:Red mud is a highly alkaline (pH >12) waste product from bauxite ore processing. The red mud spill at Ajka, Hungary, in 2010 released 1 million m(3) of caustic red mud into the surrounding area with devastating results. Aerobic and anaerobic batch experiments and solid phase extraction techniques were used to assess the impact of red mud addition on the mobility of Cu and Ni in soils from near the Ajka spill site. Red mud addition increases aqueous dissolved organic carbon (DOC) concentrations due to soil alkalisation, and this led to increased mobility of Cu and Ni complexed to organic matter. With Ajka soils, more Cu was mobilised by contact with red mud than Ni, despite a higher overall Ni concentration in the solid phase. This is most probably because Cu has a higher affinity to form complexes with organic matter than Ni. In aerobic experiments, contact with the atmosphere reduced soil pH via carbonation reactions, and this reduced organic matter dissolution and thereby lowered Cu/Ni mobility. These data show that the mixing of red mud into organic rich soils is an area of concern, as there is a potential to mobilise Cu and Ni as organically bound complexes, via soil alkalisation. This could be especially problematic in locations where anaerobic conditions can prevail, such as wetland areas contaminated by the spill.

| S-EPMC4490175 | biostudies-literature

bauxite residue eco-engineering

Project description:bauxite residue eco-engineering Raw sequence reads

| PRJNA1002762 | ENA

The potential of Hungarian bauxite residue isolates for biotechnological applications.

Project description:Bauxite residue (red mud) is considered an extremely alkaline and salty environment for the biota. We present the first attempt to isolate, identify and characterise microbes from Hungarian bauxite residues. Four identified bacterial strains belonged to the Bacilli class, one each to the Actinomycetia, Gammaproteobacteria, and Betaproteobacteria classes, and two to the Alphaproteobacteria class. All three identified fungi strains belonged to the Ascomycota division. Most strains tolerated pH 8-10 and salt content at 5-7% NaCl concentration. Alkalihalobacillus pseudofirmus BRHUB7 and Robertmurraya beringensis BRHUB9 can be considered halophilic and alkalitolerant. Priestia aryabhattai BRHUB2, Penicillium chrysogenum BRHUF1 and Aspergillus sp. BRHUF2 are halo- and alkalitolerant strains. Most strains produced siderophores and extracellular polymeric substances, could mobilise phosphorous, and were cellulose degraders. These strains and their enzymes are possible candidates for biotechnological applications in processes requiring extreme conditions, e.g. bioleaching of critical raw materials and rehabilitation of alkaline waste deposits.

| S-EPMC10788403 | biostudies-literature

red mud

Project description:red mud Raw sequence reads

| PRJNA782784 | ENA

Effect of nano-hydroxyapatite and phosphate on thorium toxicity – Arabidopsis transcriptomic study

Project description:Thorium (Th) is a ubiquitous element but elevated concentrations caused by anthropogenic or natural activities pose health and environmental risks. Nowadays, Th is obtained mainly as by-product during the mining and extraction rare earth element. However, due to its abundance in nature, which is higher than the abundance of uranium, Th is considered as a potential fuel for the reactors. Therefore, in this study, we focused on the effect of thorium on Arabidopsis plants at the transcriptomic level. Since Th and phosphorus form insoluble phosphates, we focused on the effect of Th in the presence/absence of phosphate. Furthermore, we investigated the effect of hydroxyapatite nanoparticles, which are considered as material for in situ remediation, on Th toxicity. Not surprisingly, the highest number of DEGs was recorded in the combination of P absence and Th presence followed by the presence of Th in the standard hydroponic medium, the absence of P in the medium, the presence of nano-hydroxyapatite, and the presence of Th together with hydroxyapatite. Besides a high number of genes involved in stress response, Th also induced the transcription of genes involved in response to P starvation, indicating that Th decreased the availability of P. P deficiency caused by Th contributed to the phytotoxic effect of Th. Nano-hydroxyapatite significantly reduced Th toxicity. Nano-hydroxyapatite also served as a source of inorganic P for the plants, but caused deficiency of essential metals indicated by up-regulation of genes involved in their acquisition.

2023-06-24 | GSE233480 | GEO

Separation of Scandium from Hydrochloric Acid-Ethanol Leachate of Bauxite Residue by a Supported Ionic Liquid Phase.

Project description:Solvometallurgy is a new branch of extractive metallurgy in which green organic solvents are used instead of aqueous solutions to improve selectivity in separation processes. In the present study, nonaqueous leaching of a Greek bauxite residue (BR) was performed and scandium was separated from other elements in the leachate by column chromatography. At first, the selectivity of sorbents for scandium(III) over iron(III) was tested in batch mode using various organic solvents. The following three sorbents were tested: (1) a carboxylic acid-functionalized supported ionic liquid phase (SILP), (2) silica (SiO2), and (3) silica functionalized with ethylenediaminetetraacetic acid (SiO2-TMS-EDTA). The best separation of scandium and iron was achieved from ethanolic solution by the SILP. The BR was then leached with 0.7 mol L-1 HCl in ethanol or in water. The leaching efficiency of scandium with both lixiviants was similar. However, much less sodium was leached, and silica remained in solution when leaching was performed with the ethanolic lixiviant. By using ethanol as opposed to water, the serious drawback of silica gel formation that is taking place in the aqueous leachate of BR was circumvented. The sorption preference of the SILP for metal ions in the ethanolic leachate was partly reversed compared to the aqueous leachate. Iron was separated from other metals of the ethanolic BR leachate by a simple elution with ethanol. The formation of the anionic tetrachloroferrate(III) complex, [FeCl4]-, enabled the selective elution. This complex was not observed in the aqueous leachate of BR. Scandium was separated from the vast majority of other components of the BR by elution with 0.1 mol L-1 H3PO4.

| S-EPMC7499406 | biostudies-literature

High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2.

Project description:Even though the mesoporous-type perovskite solar cell (PSC) is known for high efficiency, its planar-type counterpart exhibits lower efficiency and hysteretic response. Herein, we report success in suppressing hysteresis and record efficiency for planar-type devices using EDTA-complexed tin oxide (SnO2) electron-transport layer. The Fermi level of EDTA-complexed SnO2 is better matched with the conduction band of perovskite, leading to high open-circuit voltage. Its electron mobility is about three times larger than that of the SnO2. The record power conversion efficiency of planar-type PSCs with EDTA-complexed SnO2 increases to 21.60% (certified at 21.52% by Newport) with negligible hysteresis. Meanwhile, the low-temperature processed EDTA-complexed SnO2 enables 18.28% efficiency for a flexible device. Moreover, the unsealed PSCs with EDTA-complexed SnO2 degrade only by 8% exposed in an ambient atmosphere after 2880?h, and only by 14% after 120?h under irradiation at 100?mW?cm-2.

| S-EPMC6089874 | biostudies-other

High-Performance Planar Perovskite Solar Cells with Negligible Hysteresis Using 2,2,2-Trifluoroethanol-Incorporated SnO2.

Project description:An efficient electron transport layer (ETL) between the perovskite absorber and the cathode plays a crucial role in obtaining high-performance planar perovskite solar cells (PSCs). Here, we incorporate 2,2,2-trifluoroethanol (TFE) in the commonly used tin oxide (SnO2) ETL, and it successfully improves the power conversation efficiency (PCE) and suppresses the hysteresis of the PSCs: the PCE is increased from 19.17% to 20.92%, and the hysteresis is largely reduced to be almost negligible. The origin of the enhancement is due to the improved electron mobility and optimized work function of the ETL, together with the reduced traps in the perovskite film. In addition, O2 plasma is employed to treat the surface of the TFE-incorporated SnO2 film, and the PCE is further increased to 21.68%. The concept here of incorporating organic small molecules in the ETL provides a strategy for enhancing the performance of the planar PSCs.

| S-EPMC6593143 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data