Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

CFD and experimental data of closed-loop wind tunnel flow.

ABSTRACT: The data presented in this article were the basis for the study reported in the research articles entitled 'A validated design methodology for a closed loop subsonic wind tunnel' (Calautit et al., 2014) [1], which presented a systematic investigation into the design, simulation and analysis of flow parameters in a wind tunnel using Computational Fluid Dynamics (CFD). The authors evaluated the accuracy of replicating the flow characteristics for which the wind tunnel was designed using numerical simulation. Here, we detail the numerical and experimental set-up for the analysis of the closed-loop subsonic wind tunnel with an empty test section.

SUBMITTER: Calautit JK

PROVIDER: S-EPMC4773566 | biostudies-literature | 2016 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

CFD and experimental data of closed-loop wind tunnel flow.

Calautit John Kaiser JK Hughes Ben Richard BR

Data in brief 20160220

The data presented in this article were the basis for the study reported in the research articles entitled 'A validated design methodology for a closed loop subsonic wind tunnel' (Calautit et al., 2014) [1], which presented a systematic investigation into the design, simulation and analysis of flow parameters in a wind tunnel using Computational Fluid Dynamics (CFD). The authors evaluated the accuracy of replicating the flow characteristics for which the wind tunnel was designed using numerical ...[more]

PMID: 26958641

Similar Datasets

Airborne particle dispersion by high flow nasal oxygen: An experimental and CFD analysis.

Project description:High Flow Nasal Oxygen (HFNO) therapy offers a proven means of delivering respiratory support to critically ill patients suffering from viral illness such as COVID-19. However, the therapy has the potential to modify aerosol generation and dispersion patterns during exhalation and thereby put healthcare workers at increased risk of disease transmission. Fundamentally, a gap exists in the literature with regards to the effect of the therapy on the fluid dynamics of the exhalation jet which is essential in understanding the dispersion of aerosols and hence quantifying the disease transmission risk posed by the therapy. In this paper, a multi-faceted approach was taken to studying the aerosol-laden exhalation jet. Schlieren imaging was used to visualise the flow field for a range of expiratory activities for three healthy human volunteers receiving HFNO therapy at flow rates of 0-60 L/min. A RANS turbulence model was implemented using the CFD software OpenFOAM and used to perform a parametric study on the influence of exhalation velocity and duration on the dispersion patterns of non-evaporating droplets in a room environment. A dramatic increase in the turbulence of the exhalation jet was observed when HFNO was applied. Quantitative analysis indicated that the mean exhalation velocity was increased by 2.2-3.9 and 2.3-3 times that for unassisted breathing and coughing, respectively. A 1-2 second increase was found in the exhalation duration. The CFD model showed that small droplets (10-40 μm) were most greatly affected, where a 1 m/s increase in velocity and 1 s increase in duration caused an 80% increase in axial travel distance.

| S-EPMC8782405 | biostudies-literature

Wind tunnel data of the analysis of heat pipe and wind catcher technology for the built environment.

Project description:The data presented in this article were the basis for the study reported in the research articles entitled 'Climate responsive behaviour heat pipe technology for enhanced passive airside cooling' by Chaudhry and Hughes [10] which presents the passive airside cooling capability of heat pipes in response to gradually varying external temperatures and related to the research article "CFD and wind tunnel study of the performance of a uni-directional wind catcher with heat transfer devices" by Calautit and Hughes [1] which compares the ventilation performance of a standard roof mounted wind catcher and wind catcher incorporating the heat pipe technology. Here, we detail the wind tunnel test set-up and inflow conditions and the methodologies for the transient heat pipe experiment and analysis of the integration of heat pipes within the control domain of a wind catcher design.

| S-EPMC4773393 | biostudies-literature

Experimental Investigation and CFD Modeling of Slush Cryogen Flow Measurement Using Circular Shape Capacitors.

Project description:The measurement of two-phase cryogenic fluid mixtures flow, also known as slush cryogen flow, with its most attractive form (liquid and solid) is of great interest for various applications, due to its thermodynamic advantages. This paper presents a newly developed device, under the form of a circular capacitor prototype, together with an experimental stand for slush formation. Slush nitrogen was used as testing fluid during the experimental work. Then, the experimental data for slush cryogen flow measurement using the proposed circular shape capacitor were compared with theoretical results obtained by simulation. A three-dimensional flow field model was built and solved for the innovative design slush flowmeter using a computational fluid dynamic (CFD) model. Nitrogen slush density of 874 kg/m3, representing approximately 30% solid fraction, was reported for both the modeling and experimental testing, although the numerical investigation is not limited to these values. By comparing experimental vs. simulation results, a deeper view on the designed configuration can be achieved, thus improving the progress in producing high-performance next generation devices for two-phase flow measurement in terms of physical dimensions, length and space between armatures. Even so, the mathematical model has limitations when mixtures with higher percentages of solid phase and particle sizes are encountered.

| S-EPMC7181137 | biostudies-literature

Influence of Wind Tunnel Test Duration on Wind Load Factors.

Project description:A method is presented for calculating the uncertainty associated with the estimation of peak pressure coefficients from wind tunnel test records of various lengths and how this uncertainty influences design wind effects. The proposed method is applicable to any type of structure and any type of civil engineering aerodynamic testing facility, including large-scale facilities. As an example of the application of the method, an investigation is presented of time series belonging to five categories of pressure coefficients implicit in Chapter 27 of the ASCE 7-10 Standard. The results of the investigation show that, for typical civil engineering wind tunnels, estimated design wind effects based on tests with durations as low as 10 s, corresponding to prototype durations of less than 6 min, are larger than their counterparts based on tests with 100 s duration by only approximately 5%. The proposed method provides useful indications on minimum lengths of pressure records to be measured in wind tunnels.

| S-EPMC7905990 | biostudies-literature

An open design for a low-cost open-loop subsonic wind tunnel for aerodynamic measurement and characterization.

Project description:A wind tunnel is an essential device for aerodynamic modeling and measurement. High cost and relatively huge size with no open market design hinder the wind tunnel from being widely available in laboratory design for universities and small R&D companies, particularly in a developed country with limited research funding. Thus, most aerodynamic modeling and measurement are done by simulating through computer software which leads to high deviation as the nature of wind is unpredictable. This project aims to provide an open design for a relatively low-cost wind tunnel that universities and R&D companies can quickly adapt. An open design for an open-loop wind tunnel is presented in this article. The proposed wind tunnel design is specifically intended to help the researcher with the aerodynamic measurement with minimum cost for building, customizable design, and reliable measurement. The components, parts, and equipment use the widely available part, which can be obtained across the globe. Validation and characterization are done using software simulation and actual measurement through the device. The proposed design can meet the criteria for aerodynamic measurement and can help the researcher provide a better analysis by combining the actual measurement and software simulation.

| S-EPMC9445376 | biostudies-literature

CFD simulation study on wind load of perforated traffic sign board.

Project description:Traffic sign boards are often blown away by strong winds, seriously endangering the safety of vehicles and pedestrians. To increase their resistance to strong winds, sign boards are perforated. Using computational fluid dynamics simulations, the wind load resistance of traffic signs with holes was optimised. By comparing the solutions to different turbulence models with empirical results, it was found that the simulation results of the re-normalisation group (RNG) model have the smallest error. Therefore, the RNG model is used to simulate the wind load of traffic sign boards with different perforation diameters and different hole spacings under different wind speeds. By analysing the wind pressure distribution on the surface of the perforated traffic sign board, the perforation scheme for different regions of the sign board under different wind loads was obtained. The results show that reasonable perforation diameters and hole spacings can reduce the wind load and improve the wind load resistance of sign boards. This study provides decision-makers with useful information for installing traffic signs in areas affected with strong winds, thereby improving the wind resistance of traffic signs and ensuring traffic safety.

| S-EPMC7580890 | biostudies-literature

Wind tunnel and numerical data on the ventilation performance of windcatcher with wing wall.

Project description:The data presented in this article were the basis for the study reported in the research articles entitled "Evaluation of a two-sided windcatcher integrated with wing wall (as a new design) and comparison with a conventional windcatcher" (P. Nejat, J.K. Calautit, M.Z.A. Majid, B.R. Hughes, I. Zeynali, F. Jomehzadeh, 2016) [1] which presents the effect of wing wall on the air flow distribution under using the windcatchers as a natural ventilation equipment. Here, we detail the wind tunnel testing and numerical set-up used for obtaining the data on ventilation rates and indoor airflow distribution inside a test room with a two-sided windcatcher and wing wall. Three models were integrated with wing wall angled at 30°, 45° and 60° and another windcatcher was a conventional two-sided device. The computer-aided design (CAD) three-dimensional geometries which were produced using Solid Edge modeler are also included in the data article.

| S-EPMC5040639 | biostudies-literature

Measurement uncertainties in quantifying aeolian mass flux: evidence from wind tunnel and field site data.

Project description:Aeolian sediment traps are widely used to estimate the total volume of wind-driven sediment transport, but also to study the vertical mass distribution of a saltating sand cloud. The reliability of sediment flux estimations from such measurements are dependent upon the specific configuration of the measurement compartments and the analysis approach used. In this study, we analyse the uncertainty of these measurements by investigating the vertical cumulative distribution and relative sediment flux derived from both wind tunnel and field studies. Vertical flux data was examined using existing data in combination with a newly acquired dataset; comprising meteorological data and sediment fluxes from six different events, using three customized catchers at Ameland beaches in northern Netherlands. Fast-temporal data collected in a wind tunnel shows that the median transport height has a scattered pattern between impact and fluid threshold, that increases linearly with shear velocities above the fluid threshold. For finer sediment, a larger proportion was transported closer to the surface compared to coarser sediment fractions. It was also shown that errors originating from the distribution of sampling compartments, specifically the location of the lowest sediment trap relative to the surface, can be identified using the relative sediment flux. In the field, surface conditions such as surface moisture, surface crusts or frozen surfaces have a more pronounced but localized effect than shear velocity. Uncertainty in aeolian mass flux estimates can be reduced by placing multiple compartments in closer proximity to the surface.

| S-EPMC4103076 | biostudies-literature

The DecNef collection, fMRI data from closed-loop decoded neurofeedback experiments.

Project description:Decoded neurofeedback (DecNef) is a form of closed-loop functional magnetic resonance imaging (fMRI) combined with machine learning approaches, which holds some promises for clinical applications. Yet, currently only a few research groups have had the opportunity to run such experiments; furthermore, there is no existing public dataset for scientists to analyse and investigate some of the factors enabling the manipulation of brain dynamics. We release here the data from published DecNef studies, consisting of 5 separate fMRI datasets, each with multiple sessions recorded per participant. For each participant the data consists of a session that was used in the main experiment to train the machine learning decoder, and several (from 3 to 10) closed-loop fMRI neural reinforcement sessions. The large dataset, currently comprising more than 60 participants, will be useful to the fMRI community at large and to researchers trying to understand the mechanisms underlying non-invasive modulation of brain dynamics. Finally, the data collection size will increase over time as data from newly run DecNef studies will be added.

| S-EPMC7902847 | biostudies-literature

Creating the feedback loop: closed-loop neurostimulation.

Project description:Current DBS therapy delivers a train of electrical pulses at set stimulation parameters. This open-loop design is effective for movement disorders, but therapy may be further optimized by a closed loop design. The technology to record biosignals has outpaced our understanding of their relationship to the clinical state of the whole person. Neuronal oscillations may represent or facilitate the cooperative functioning of brain ensembles, and may provide critical information to customize neuromodulation therapy. This review addresses advances to date, not of the technology per se, but of the strategies to apply neuronal signals to trigger or modulate stimulation systems.

| S-EPMC4058859 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data