Dataset Information

A novel method for assessing respiratory deposition of welding fume nanoparticles.

ABSTRACT: Welders are exposed to high concentrations of nanoparticles. Compared to larger particles, nanoparticles have been associated with more toxic effects at the cellular level, including the generation of more reactive oxygen species activity. Current methods for welding-fume aerosol exposures do not differentiate between the nano-fraction and the larger particles. The objectives of this work are to establish a method to estimate the respiratory deposition of the nano-fraction of selected metals in welding fumes and test this method in a laboratory setting. Manganese (Mn), Nickel (Ni), Chromium (Cr), and hexavalent chromium (Cr(VI)) are commonly found in welding fume aerosols and have been linked with severe adverse health outcomes. Inductively coupled plasma mass spectrometry (ICP-MS) and ion chromatography (IC) were evaluated as methods for analyzing the content of Mn, Ni, Cr, and Cr(VI) nanoparticles in welding fumes collected with nanoparticle respiratory deposition (NRD) samplers. NRD samplers collect nanoparticles at deposition efficiencies that closely resemble physiological deposition in the respiratory tract. The limits of detection (LODs) and quantitation (LOQs) for ICP-MS and IC were determined analytically. Mild and stainless steel welding fumes generated with a robotic welder were collected with NRD samplers inside a chamber. LODs (LOQs) for Mn, Ni, Cr, and Cr(VI) were 1.3 ?g (4.43 ?g), 0.4 ?g (1.14 ?g), 1.1 ?g (3.33 ?g), and 0.4 ?g (1.42 ?g), respectively. Recovery of spiked samples and certified welding fume reference material was greater than 95%. When testing the method, the average percentage of total mass concentrations collected by the NRD samplers was ~30% for Mn, ~50% for Cr, and ~60% for Ni, indicating that a large fraction of the metals may lie in the nanoparticle fraction. This knowledge is critical to the development of toxicological studies aimed at finding links between exposure to welding fume nanoparticles and adverse health effects. Future work will involve the validation of the method in workplace settings. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of Occupational and Environmental Hygiene for the following free supplemental resource: Digestion, extraction, and analysis procedures for nylon mesh screens.].

SUBMITTER: Cena LG

PROVIDER: S-EPMC4783140 | biostudies-literature | 2014

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

A novel method for assessing respiratory deposition of welding fume nanoparticles.

Cena L G LG Keane M J MJ Chisholm W P WP Stone S S Harper M M Chen B T BT

Journal of occupational and environmental hygiene 20140101 12

Welders are exposed to high concentrations of nanoparticles. Compared to larger particles, nanoparticles have been associated with more toxic effects at the cellular level, including the generation of more reactive oxygen species activity. Current methods for welding-fume aerosol exposures do not differentiate between the nano-fraction and the larger particles. The objectives of this work are to establish a method to estimate the respiratory deposition of the nano-fraction of selected metals in ...[more]

PMID: 24824154

Similar Datasets

Project description:The welding of shear stud connectors to structural steel in construction requires a prolonged stooped posture that exposes ironworkers to biomechanical and welding fume hazards. In this study, biomechanical and welding fume exposures during stud welding using conventional methods were compared to exposures associated with use of a prototype system that allowed participants to weld from an upright position. The effect of base material (i.e. bare structural beam versus galvanized decking) on welding fume concentration (particle number and mass), particle size distribution, and particle composition was also explored. Thirty participants completed a series of stud welding simulations in a local apprenticeship training facility. Use of the upright system was associated with substantial reductions in trunk inclination and the activity levels of several muscle groups. Inhalable mass concentrations of welding fume (averaged over ~18 min) when using conventional methods were high (18.2 mg m(-3) for bare beam; 65.7 mg m(-3) for through deck), with estimated mass concentrations of iron (7.8 mg m(-3) for bare beam; 15.8 mg m(-3) for through deck), zinc (0.2 mg m(-3) for bare beam; 15.8 mg m(-3) for through deck), and manganese (0.9 mg m(-3) for bare beam; 1.5 mg m(-3) for through deck) often exceeding the American Conference of Governmental Industrial Hygienists Threshold Limit Values (TLVs). Number and mass concentrations were substantially reduced when using the upright system, although the total inhalable mass concentration remained above the TLV when welding through decking. The average diameters of the welding fume particles for both bare beam (31±17 nm) through deck conditions (34±34 nm) and the chemical composition of the particles indicated the presence of metallic nanoparticles. Stud welding exposes ironworkers to potentially high levels of biomechanical loading (primarily to the low back) and welding fume. The upright system used in this study improved exposure levels during stud welding simulations, but further development is needed before field deployment is possible.

Project description:BackgroundOccupational welding fumes contain varieties of toxic metal particles and may affect cardiovascular system like the Particulate Matters (PM). Few studies have focused on the effects of toxic metals on the hemodynamic balance; however, the reporting results were not consistent. This study aimed to investigate the association between toxic metals exposure (Chromium (Cr), Manganese (Mn) and Lead (Pb)) and blood hemostatic parameters status after a 3-week exposure cessation among workers exposed to welding fumes.MethodologyStructured interviews and biological samplings were conducted for 86 male workers without a history of Anemia and Cardiovascular diseases (CVDs) and working in a confined space to construct crude oil tanks. Metal levels of Cr, Mn and Pb in urine were measured during the working days using Inductively Coupled Plasma Mass Spectrometer (ICP-MS) method. The concentrations of hemostatic proteins in blood (White blood cell counts (WBC), Lymphocytes, Monocyte, Eosinophil, Neutrophil, Hematocrit (Hct) were assessed after a 3 weeks exposure cessation. Workers were divided into groups based on occupation type (welder group and non-welder group), and based on metal levels (high and low exposure groups) for comparison. Linear regression models were used to explore the association between metal exposure and multiple blood hemostatic parameters adjusted for age, Body Mass Index (BMI), and smoking status.ResultsUrine Mn and Cr level of the welder group was significantly higher than the non-welder group (Mn: 0.96 VS 0.22 ug/g creatinine, p < 0.001; Cr: 0.63 VS 0.22 ug/g creatinine, p < 0.01). The mean value of Hct in the welder group was 44.58 ± 2.84 vol%, significantly higher than the non-welder group (43.07 ± 3.31 vol%, p = 0.026). The median value of WBC in the high Mn-exposed group (6.93 ± 1.59 X 106 Cell/ml) was significantly lower than the low Mn-exposed group (7.90 ± 2.13 X 106 Cell/ml, p = 0.018). The linear regression analyses showed that there was a significantly negative association between log transformed WBC value and the Mn exposure groups (high and low) after adjusting for age, BMI, and smoking status (β = - 0.049, p = 0.045), but no significant result was found between WBC and occupation types (welder and non-welder) (p > 0.05). Multiple linear regression analysis also showed positive association between Hct and occupational types (welder and non-welders) (β = 0.014, p = 0.055). The other hemostatic parameters were not different from controls when divided by occupation type or metal level groups.ConclusionsOur results showed that welders were exposed to about 3 to 4 times higher Mn and Cr concentrations than non-welders. Moreover, one third of the non-welders were exposed to high-exposure groups of Mn and Cr metals. Regression models revealed a significant association of the WBC counts with the Mn exposure group. Therefore, we infer that Mn exposure may play a significant role on the blood hemostatic parameters of workers in the confined space. Hazard identification for non-welders should also be conducted in the confined space.

Project description:BackgroundTungsten inert gas (TIG) welding represents one of the most widely used metal joining processes in industry. It has been shown to generate a large majority of particles at the nanoscale and to have low mass emission rates when compared to other types of welding. Despite evidence that TIG fume particles may produce reactive oxygen species (ROS), limited data is available for the time course changes of particle-associated oxidative stress in exposed TIG welders.MethodsTwenty non-smoking male welding apprentices were exposed to TIG welding fumes for 60 min under controlled, well-ventilated settings. Exhaled breathe condensate (EBC), blood and urine were collected before exposure, immediately after exposure, 1 h and 3 h post exposure. Volunteers participated in a control day to account for oxidative stress fluctuations due to circadian rhythm. Biological liquids were assessed for total reducing capacity, hydrogen peroxide (H2O2), malondialdehyde (MDA), and 8-hydroxy-2'-deoxyguanosine (8-OHdG) concentrations at each time point. A linear mixed model was used to assess within day and between day differences.ResultsSignificant increases in the measured biomarkers were found at 3 h post exposure. At 3 h post exposure, we found a 24 % increase in plasma-H2O2 concentrations ([95%CI: 4 % to 46 %], p?=?0.01); a 91 % increase in urinary-H2O2 ([2 % to 258 %], p?=?0.04); a 14 % increase in plasma-8-OHdG ([0 % to 31 %], p?=?0.049); and a 45 % increase in urinary-8-OHdG ([3 % to 105 %], p?=?0.03). Doubling particle number concentration (PNC) exposure was associated with a 22 % increase of plasma-8-OHdG at 3 h post exposure (p?=?0.01).ConclusionA 60-min exposure to TIG welding fume in a controlled, well-ventilated setting induced acute oxidative stress at 3 h post exposure in healthy, non-smoking apprentice welders not chronically exposed to welding fumes. As mass concentration of TIG welding fume particles is very low when compared to other types of welding, it is recommended that additional exposure metrics such as PNC are considered for occupational risk assessments. Our findings highlight the importance of increasing awareness of TIG welding fume toxicity, especially given the realities of welding workplaces that may lack ventilation; and beliefs among interviewed welders that TIG represents a cleaner and safer welding process.

Dataset Information

A novel method for assessing respiratory deposition of welding fume nanoparticles.

Publications

A novel method for assessing respiratory deposition of welding fume nanoparticles.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets