Browse
Submit Data
Databases
API
Help

Dataset Information

34 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Structural, optical and charge generation properties of chalcostibite and tetrahedrite copper antimony sulfide thin films prepared from metal xanthates.

ABSTRACT: Herein, we report on a solution based approach for the preparation of thin films of copper antimony sulfide, an emerging absorber material for third generation solar cells. In this work, copper and antimony xanthates are used as precursor materials for the formation of two different copper antimony sulfide phases: chalcostibite (CuSbS₂) and tetrahedrite (Cu₁₂Sb₄S₁₃). Both phases were thoroughly investigated regarding their structural and optical properties. Moreover, thin films of chalcostibite and tetrahedrite were prepared on mesoporous TiO₂ layers and photoinduced charge transfer in these metal sulfide/TiO₂ heterojunctions was studied via transient absorption spectroscopy. Photoinduced charge transfer was detected in both the chalcostibite as well as the tetrahedrite sample, which is an essential property in view of applying these materials as light-harvesting agents in semiconductor sensitized solar cells.

SUBMITTER: Rath T

PROVIDER: S-EPMC4786956 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Antimony thin films demonstrate programmable optical nonlinearity.

Project description:The use of metals of nanometer dimensions to enhance and manipulate light-matter interactions for emerging plasmonics-enabled nanophotonic and optoelectronic applications is an interesting yet not highly explored area of research beyond plasmonics. Even more importantly, the concept of an active metal that can undergo an optical nonvolatile transition has not been explored. Here, we demonstrate that antimony (Sb), a pure metal, is optically distinguishable between two programmable states as nanoscale thin films. We show that these states, corresponding to the crystalline and amorphous phases of the metal, are stable at room temperature. Crucially from an application standpoint, we demonstrate both its optoelectronic modulation capabilities and switching speed using single subpicosecond pulses. The simplicity of depositing a single metal portends its potential for use in any optoelectronic application where metallic conductors with an actively tunable state are important.

| S-EPMC7775754 | biostudies-literature

Influence of Antimony Species on Electrical Properties of Sb-Doped Zinc Oxide Thin Films Prepared by Pulsed Laser Deposition.

Project description:This study systematically investigates the influence of antimony (Sb) species on the electrical properties of Sb-doped zinc oxide (SZO) thin films prepared by pulsed laser deposition in an oxygen-rich environment. The Sb species-related defects were controlled through a qualitative change in energy per atom by increasing the Sb content in the Sb2O3:ZnO-ablating target. By increasing the content of Sb2O3 (wt.%) in the target, Sb3+ became the dominant Sb ablation species in the plasma plume. Consequently, n-type conductivity was converted to p-type conductivity in the SZO thin films prepared using the ablating target containing 2 wt.% Sb2O3. The substituted Sb species in the Zn site (SbZn3+ and SbZn+) were responsible for forming n-type conductivity at low-level Sb doping. On the other hand, the Sb-Zn complex defects (SbZn-2VZn) contributed to the formation of p-type conductivity at high-level doping. The increase in Sb2O3 content in the ablating target, leading to a qualitative change in energy per Sb ion, offers a new pathway to achieve high-performing optoelectronics using ZnO-based p-n junctions.

| S-EPMC10255333 | biostudies-literature

Structural and optical properties of amorphous Si-Ge-Te thin films prepared by combinatorial sputtering.

Project description:The lack of order in amorphous chalcogenides offers them novel properties but also adds increased challenges in the discovery and design of advanced functional materials. The amorphous compositions in the Si-Ge-Te system are of interest for many applications such as optical data storage, optical sensors and Ovonic threshold switches. But an extended exploration of this system is still missing. In this study, magnetron co-sputtering is used for the combinatorial synthesis of thin film libraries, outside the glass formation domain. Compositional, structural and optical properties are investigated and discussed in the framework of topological constraint theory. The materials in the library are classified as stressed-rigid amorphous networks. The bandgap is heavily influenced by the Te content while the near-IR refractive index dependence on Ge concentration shows a minimum, which could be exploited in applications. A transition from a disordered to a more ordered amorphous network at 60 at% Te, is observed. The thermal stability study shows that the formed crystalline phases are dictated by the concentration of Ge and Te. New amorphous compositions in the Si-Ge-Te system were found and their properties explored, thus enabling an informed and rapid material selection and design for applications.

| S-EPMC8175571 | biostudies-literature

Copper-Arsenic-Sulfide Thin-Films from Local Raw Materials Deposited via RF Co-Sputtering for Photovoltaics.

Project description:The inexorable increase of energy demand and the efficiency bottleneck of monocrystalline silicon solar cell technology is promoting the research and development of alternative photovoltaic materials. Copper-arsenic-sulfide (CAS) compounds are still rather unexplored in the literature, yet they have been regarded as promising candidates for use as p-type absorber in solar cells, owing to their broad raw material availability, suitable bandgap and high absorption coefficient. Here, a comprehensive study is presented on the structural and optoelectronic properties of CAS thin-films deposited via radio-frequency magnetron co-sputtering, using a commercial Cu target together with a Cu-As-S target with material obtained from local resources, specifically from mines in the Portuguese region of the Iberian Pyrite Belt. Raman and X-ray diffraction analysis confirm that the use of two targets results in films with pronounced stoichiometry gradients, suggesting a transition from amorphous CAS compounds to crystalline djurleite (Cu31S16), with the increasing proximity to the Cu target. Resistivity values from 4.7 mΩ·cm to 17.4 Ω·cm are obtained, being the lowest resistive films, those with pronounced sub-bandgap free-carrier absorption. The bandgap values range from 2.20 to 2.65 eV, indicating promising application as wide-bandgap semiconductors in third-generation (e.g., multi-junction) photovoltaic devices.

| S-EPMC9565231 | biostudies-literature

Evolution of topological surface states in antimony ultra-thin films.

Project description:Based on an inverted bulk band order, antimony thin films presumably could become topological insulators if quantum confinement effect opens up a gap in the bulk bands. Coupling between topological surface states (TSS) from opposite surfaces, however, tends to degrade or even destroy their novel characters. Here the evolution and coupling of TSS on Sb(111) thin films from 30 bilayers down to 4 bilayers was investigated using in-situ Fourier-transform scanning tunneling spectroscopy and density functional theory computations. On a 30-bilayer sample, quasi-particle interference patterns are generated by the scattering of TSS from the top surface only. As the thickness decreases, inter-surface coupling degrades spin polarisation of TSS and opens up new wavevector-dependent scattering channels, resulting in spin degenerate states in most part of the surface Brillouin zone, whereas the TSS near the zone centre exhibit little inter-surface coupling, so they remain spin-polarised without opening a gap at the Dirac point.

| S-EPMC3684810 | biostudies-other

Temperature, Crystalline Phase and Influence of Substrate Properties in Intense Pulsed Light Sintering of Copper Sulfide Nanoparticle Thin Films.

Project description:Intense Pulsed Light sintering (IPL) uses pulsed, visible light to sinter nanoparticles (NPs) into films used in functional devices. While IPL of chalcogenide NPs is demonstrated, there is limited work on prediction of crystalline phase of the film and the impact of optical properties of the substrate. Here we characterize and model the evolution of film temperature and crystalline phase during IPL of chalcogenide copper sulfide NP films on glass. Recrystallization of the film to crystalline covellite and digenite phases occurs at 126?°C and 155?°C respectively within 2-7?seconds. Post-IPL films exhibit p-type behavior, lower resistivity (~10-3-10-4??-cm), similar visible transmission and lower near-infrared transmission as compared to the as-deposited film. A thermal model is experimentally validated, and extended by combining it with a thermodynamic approach for crystal phase prediction and via incorporating the influence of film transmittivity and optical properties of the substrate on heating during IPL. The model is used to show the need to a-priori control IPL parameters to concurrently account for both the thermal and optical properties of the film and substrate in order to obtain a desired crystalline phase during IPL of such thin films on paper and polycarbonate substrates.

| S-EPMC5797230 | biostudies-literature

Influence of Heat Treatment on Surface, Structural and Optical Properties of Nickel and Copper Phthalocyanines Thin Films.

Project description:The work presents the effect of annealing on the change of polycrystalline α and β phases of copper and nickel phthalocyanines. We have found that this process has a great influence on the optical properties of the vapor-deposited layers. The performed measurements showed that for various forms of MPc, the values of the refractive index and the extinction coefficient increased, and consequently, so did the absorption coefficient. The AFM images taken showed that the values before and after heating are morphologically different. Raman measurements showed that the band at about 1526 cm-1 (B1g symmetry) has higher intensity for the α form than for the β form. The intensity of this band is related to changing the form of phthalocyanine from α to β. Our measurements have shown that by changing the annealing temperature of the layers, we change their optical properties. As a consequence, we change their optoelectronic parameters, adjusting them to the requirements of new optoelectronic devices, such as solar cells, sensors, displays and OLEDs.

| S-EPMC9569429 | biostudies-literature

Silver content dependent thermal conductivity and thermoelectric properties of electrodeposited antimony telluride thin films.

Project description:While electrodeposited antimony telluride thin films with silver contents demonstrated promising thermoelectric properties, their thermal conductivity and the silver content dependence remain unknown. Here, we report the thermal conductivities of Ag3.9Sb33.6Te62.5 and AgSbTe2 thin films with controlled annealing and temperature conditions and demonstrate the impact of silver content on thermal transport. After annealing at 160 °C, the room-temperature thermal conductivity of Ag3.9Sb33.6Te62.5 and AgSbTe2 thin films increases from 0.24 to 1.59 Wm-1 K-1 and from 0.17 to 0.56 Wm-1 K-1, respectively. Using phonon transport models and X-ray diffraction measurements, we attribute the thermal conductivity increases to the crystal growth and explain the thermal conductivity variations with the degree of crystallization. Unlike electrical properties reported in previous studies, the presence of silver contents has little impact on the thermal conductivity of Ag3.9Sb33.6Te62.5 and leads to a strong reduction in the thermal conductivity of AgSbTe2 thin films. By performing transient thermal conductivity measurements at 94 °C, we find the crystallization activation energy of Ag3.9Sb33.6Te62.5 and AgSbTe2 films as 1.14 eV and 1.16 eV, respectively. Their differences reveal the role of silver in inhibiting the nucleation and growth of Sb2Te3 crystals and impeding thermal transport. These findings provide guidance for optimizing doping and annealing conditions of antimony tellurides for near-room-temperature thermoelectric applications.

| S-EPMC6592942 | biostudies-literature

Magnetic characteristics of copper ion-modified DNA thin films.

Project description:We developed a new method of fabricating a divalent copper ion (Cu(2+)) modified DNA thin film on a glass substrate and studied its magnetic properties. We evaluated the coercive field (Hc), remanent magnetization (Mr), susceptibility (?), and thermal variation of magnetization with varying Cu(2+) concentrations [Cu(2+)] resulting in DNA thin films. Although thickness of the two dimensional DNA thin film with Cu(2+) in dry state was extremely thin (0.6?nm), significant ferromagnetic signals were observed at room temperature. The DNA thin films with a [Cu(2+)] near 5?mM showed the distinct S-shape hysteresis with appreciable high Hc, Mr and ? at low field (?600?Oe). These were primarily caused by the presence of small magnetic dipoles of Cu(2+) coordination on the DNA molecule, through unpaired d electrons interacting with their nearest neighbors and the inter-exchange energy in the magnetic dipoles making other neighboring dipoles oriented in the same direction.

| S-EPMC3650661 | biostudies-literature

Polymorphism and structure formation in copper phthalocyanine thin films.

Project description:Many polymorphic crystal structures of copper phthalocyanine (CuPc) have been reported over the past few decades, but despite its manifold applicability, the structure of the frequently mentioned α polymorph remained unclear. The base-centered unit cell (space group C2/c) suggested in 1966 was ruled out in 2003 and was replaced by a primitive triclinic unit cell (space group P 1). This study proves unequivocally that both α structures coexist in vacuum-deposited CuPc thin films on native silicon oxide by reciprocal space mapping using synchrotron radiation in grazing incidence. The unit-cell parameters and the space group were determined by kinematic scattering theory and provide possible molecular arrangements within the unit cell of the C2/c structure by excluded-volume considerations. In situ X-ray diffraction experiments and ex situ atomic force microscopy complement the experimental data further and provide insight into the formation of a smooth thin film by a temperature-driven downward diffusion of CuPc molecules during growth.

| S-EPMC7941321 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data