Browse
Submit Data
Databases
API
Help

Dataset Information

8 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Spatial control of chemical processes on nanostructures through nano-localized water heating.

ABSTRACT: Optimal performance of nanophotonic devices, including sensors and solar cells, requires maximizing the interaction between light and matter. This efficiency is optimized when active moieties are localized in areas where electromagnetic (EM) fields are confined. Confinement of matter in these 'hotspots' has previously been accomplished through inefficient 'top-down' methods. Here we report a rapid 'bottom-up' approach to functionalize selective regions of plasmonic nanostructures that uses nano-localized heating of the surrounding water induced by pulsed laser irradiation. This localized heating is exploited in a chemical protection/deprotection strategy to allow selective regions of a nanostructure to be chemically modified. As an exemplar, we use the strategy to enhance the biosensing capabilities of a chiral plasmonic substrate. This novel spatially selective functionalization strategy provides new opportunities for efficient high-throughput control of chemistry on the nanoscale over macroscopic areas for device fabrication.

SUBMITTER: Jack C

PROVIDER: S-EPMC4792951 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Manipulating Chemical Processes by Pseudosolid Spatial Limitation.

Project description:It is always preferred to perform chemical processes in liquid or gas phases because of the merits of operation convenience, reaction efficiency, and component homogeneity. However, tremendous efforts have to be made to purify the final product and minimize procedure losses unless a well-defined chemical mechanism is found. Herein, an unconventional chemical functioning system accommodating molecule-in-pseudosolid manipulation is reported. It entails the properties of enhanced molecular effective collision and directional guidance for delicate chemical reaction spatial controls. This design achieves facilitated rates on multicomponent chemical reactions with pros of unique simultaneous final product separation through intrapseudosolid spatial limitation. Localized homogeneous component mixing, pronounced molecular collision, and pure product separation happening in this action surmount the obstacles of conventional chemical operation with a straightforward sketch. A path toward fine chemistry is therefore paved, where traditional thoughts on beneficial reaction environments may be reconsidered.

| S-EPMC8479777 | biostudies-literature

Chemical Control and Spectral Fingerprints of Electronic Coupling in Carbon Nanostructures.

Project description:The optical and electronic properties of atomically thin materials such as single-walled carbon nanotubes and graphene are sensitively influenced by substrates, the degree of aggregation, and the chemical environment. However, it has been experimentally challenging to determine the origin and quantify these effects. Here we use time-dependent density-functional-theory calculations to simulate these properties for well-defined molecular systems. We investigate a series of core-shell structures containing C60 enclosed in progressively larger carbon shells and their perhydrogenated or perfluorinated derivatives. Our calculations reveal strong electronic coupling effects that depend sensitively on the interparticle distance and on the surface chemistry. In many of these systems we predict considerable orbital mixing and charge transfer between the C60 core and the enclosing shell. We predict that chemical functionalization of the shell can modulate the electronic coupling to the point where the core and shell are completely decoupled into two electronically independent chemical systems. Additionally, we predict that the C60 core will oscillate within the confining shell, at a frequency directly related to the strength of the electronic coupling. This low-frequency motion should be experimentally detectable in the IR region.

| S-EPMC5555747 | biostudies-literature

Control of Bandgaps and Energy Levels in Water-Soluble Discontinuously Conjugated Polymers through Chemical Modification.

Project description:Bandgap and energy levels are crucial for developing new electronic and photonic devices because photoabsorption is highly dependent on the bandgap. Moreover, the transfer of electrons and holes between different materials depends on their respective bandgaps and energy levels. In this study, we demonstrate the preparation of a series of water-soluble discontinuously π-conjugated polymers through the addition-condensation polymerization of pyrrole (Pyr), 1,2,3-trihydroxybenzene (THB) or 2,6-dihydroxytoluene (DHT), and aldehydes, including benzaldehyde-2-sulfonic acid sodium salt (BS) and 2,4,6-trihydroxybenzaldehyde (THBA). To control the energy levels of the polymers, varying amounts of phenols (THB or DHT) were introduced to alter the electronic properties of the polymer structure. The introduction of THB or DHT into the main chain results in discontinuous conjugation and enables the control of both the energy level and bandgap. Chemical modification (acetoxylation of phenols) of the polymers was employed to further tune the energy levels. The optical and electrochemical properties of the polymers were also investigated. The bandgaps of the polymers were controlled in the range of 0.5-1.95 eV, and their energy levels could also be effectively tuned.

| S-EPMC10304089 | biostudies-literature

Temperature Assessment Of Microwave-Enhanced Heating Processes.

Project description:In this study, real-time and in-situ permittivity measurements under intense microwave electromagnetic fields are proposed as a powerful technique for the study of microwave-enhanced thermal processes in materials. In order to draw reliable conclusions about the temperatures at which transformations occur, we address how to accurately measure the bulk temperature of the samples under microwave irradiation. A new temperature calibration method merging data from four independent techniques is developed to obtain the bulk temperature as a function of the surface temperature in thermal processes under microwave conditions. Additionally, other analysis techniques such as Differential Thermal Analysis (DTA) or Raman spectroscopy are correlated to dielectric permittivity measurements and the temperatures of thermal transitions observed using each technique are compared. Our findings reveal that the combination of all these procedures could help prove the existence of specific non-thermal microwave effects in a scientifically meaningful way.

| S-EPMC6658534 | biostudies-literature

Spatial metabolomics identifies localized chemical changes in heart tissue during chronic cardiac Chagas Disease.

Project description:Chagas disease (CD), caused by the parasite Trypanosoma cruzi, is one of nineteen neglected tropical diseases. CD is a vector-borne disease transmitted by triatomines, but CD can also be transmitted through blood transfusions, organ transplants, T. cruzi-contaminated food and drinks, and congenital transmission. While endemic to the Americas, T. cruzi infects 7-8 million people worldwide and can induce severe cardiac symptoms including apical aneurysms, thromboembolisms and arrhythmias during the chronic stage of CD. However, these cardiac clinical manifestations and CD pathogenesis are not fully understood. Using spatial metabolomics (chemical cartography), we sought to understand the localized impact of chronic CD on the cardiac metabolome of mice infected with two divergent T. cruzi strains. Our data showed chemical differences in localized cardiac regions upon chronic T. cruzi infection, indicating that parasite infection changes the host metabolome at specific sites in chronic CD. These sites were distinct from the sites of highest parasite burden. In addition, we identified acylcarnitines and glycerophosphocholines as discriminatory chemical families within each heart region, comparing infected and uninfected samples. Overall, our study indicated global and positional metabolic differences common to infection with different T. cruzi strains and identified select infection-modulated pathways. These results provide further insight into CD pathogenesis and demonstrate the advantage of a systematic spatial perspective to understand infectious disease tropism.

| S-EPMC8516257 | biostudies-literature

Air-source heat pump heating based water vapor compression for localized steam sterilization applications during the COVID-19 pandemic.

Project description:Sterilization is of great importance to prevent the spread and resurgence of the COVID-19, yet sterilization methods are all energy intensive in general. Steam sterilization is easily maintained and can be applied in various scenarios with less residual pollution. However, the current steam generator (so called boiler) has brought many energy and environmental concerns. With the investigation on steam sterilization's features, this study proposed a clean and flexible steam generation system with the air source heat pump and water vapor compressor, and the system can be further simplified through the combination with district heating pipeline. The critical design parameters and simulated performance of the system are evaluated and optimized through a MATLAB simulation, and a prototype was built with experimental performance assessing. The results show the system has an average boiler efficiency of over 170% when the ambient temperature varies from 5 °C to 35 °C and the temperature of outlet steam is above 110 °C, and has the best economic performance when the operating period is above 3 years. Furthermore, the air-source heat pump boiler system is proved to effectively respond to the surging sterilization demands during the peaks of the COVID-19 pandemic and is well consistent with the UN Sustainable Development Goals.

| S-EPMC9760490 | biostudies-literature

Direction control of quasi-stokeslet induced by thermoplasmonic heating of a water vapor microbubble.

Project description:We investigate the control of flow direction around a water vapor bubble using the thermoplasmonic effect of a gold nanoisland film (GNF) under laser irradiation with multiple spots. By focusing a laser spot on the GNF immersed in degassed water, a water vapor bubble with a diameter of ~10 μm is generated. Simultaneously, a sub laser spot was focused next to the bubble to yield a temperature gradient in the direction parallel to the GNF surface. Consequently, rapid flow was generated around the bubble, whose flow direction was dependent on the power of the sub laser spot. The observed flow was well-described using a stokeslet; the latter contained components normal and parallel to the GNF surface and was set to 10 μm above the GNF. This technique allows us to apply a significant force on the microfluid at the vicinity of the wall in the direction parallel to the wall surface, where the flow speed is generally suppressed by viscosity. It is expected to be useful for microfluidic pumping and microfluidic thermal management.

| S-EPMC6423281 | biostudies-literature

Spatial control of gene expression within a scaffold by localized inducer release.

Project description:Gene expression can be controlled in genetically modified cells by employing an inducer/promoter system where presence of the inducer molecule regulates the timing and level of gene expression. By applying the principles of controlled release, it should be possible to control gene expression on a biomaterial surface by the presence or absence of inducer release from the underlying material matrix, thus avoiding alternative techniques that rely upon uptake of relatively labile DNA from material surfaces. To evaluate this concept, a modified ecdysone-responsive gene expression system was transfected into B16 murine cells and the ability of an inducer ligand, which was released from elastomeric poly(ester urethane) urea (PEUU), to initiate gene expression was studied. The synthetic inducer ligand was first loaded into PEUU to demonstrate extended release of the bioactive molecule at various loading densities over a one year period in vitro. Patterning films of PEUU variably-loaded with inducer resulted in spatially controlled cell expression of the gene product (green fluorescent protein, GFP). In porous scaffolds made from PEUU by salt leaching, where the central region was exclusively loaded with inducer, cells expressed GFP predominately in the loaded central regions whereas expression was minimal in outer regions where ligand was omitted. This scaffold system may ultimately provide a means to precisely control progenitor cell commitment in a spatially-defined manner in vivo for soft tissue repair and regeneration.

| S-EPMC3178343 | biostudies-literature

Precision chemical heating for diagnostic devices.

Project description:Decoupling nucleic acid amplification assays from infrastructure requirements such as grid electricity is critical for providing effective diagnosis and treatment at the point of care in low-resource settings. Here, we outline a complete strategy for the design of electricity-free precision heaters compatible with medical diagnostic applications requiring isothermal conditions, including nucleic acid amplification and lysis. Low-cost, highly energy dense components with better end-of-life disposal options than conventional batteries are proposed as an alternative to conventional heating methods to satisfy the unique needs of point of care use.

| S-EPMC10249953 | biostudies-literature

Control of actin-based motility through localized actin binding.

Project description:A wide variety of cell biological and biomimetic systems use actin polymerization to drive motility. It has been suggested that an object such as a bacterium can propel itself by self-assembling a high concentration of actin behind it, if it is repelled by actin. However, it is also known that it is essential for the moving object to bind actin. Therefore, a key question is how the actin tail can propel an object when it both binds and repels the object. We present a physically consistent Brownian dynamics model for actin-based motility that includes the minimal components of the dendritic nucleation model and allows for both attractive and repulsive interactions between actin and a moveable disc. We find that the concentration gradient of filamentous actin generated by polymerization is sufficient to propel the object, even with moderately strong binding interactions. Additionally, actin binding can act as a biophysical cap, and may directly control motility through modulation of network growth. Overall, this mechanism is robust in that it can drive motility against a load up to a stall pressure that depends on the Young's modulus of the actin network and can explain several aspects of actin-based motility.

| S-EPMC3902021 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data