Browse
Submit Data
Databases
API
Help

Dataset Information

13 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Fabrication of Radially Symmetric Graded Porous Silicon using a Novel Cell Design.

ABSTRACT: A contactless method using a novel design of the experimental cell for formation of porous silicon with morphological gradient is reported. Fabricated porous silicon layers show a large distribution in porosity, pore size and depth along the radius of the samples. Symmetrical arrangements of morphology gradient were successfully formulated radially on porous films and the formation was attributed to decreasing current density radially inward on the silicon surface exposed to Triton(®) X-100 containing HF based etchant solution. Increasing the surfactant concentration increases the pore depth gradient but has a reverse effect on the pore size distribution. Interestingly, when dimethyl sulfoxide was used instead of Triton(®) X-100 in the etchant solution, no such morphological gradients were observed and a homogeneous porous film was formed.

SUBMITTER: Zhao M

PROVIDER: S-EPMC4840451 | biostudies-literature | 2016 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Fabrication of Radially Symmetric Graded Porous Silicon using a Novel Cell Design.

Zhao Mingrui M Keswani Manish M

Scientific reports 20160422

A contactless method using a novel design of the experimental cell for formation of porous silicon with morphological gradient is reported. Fabricated porous silicon layers show a large distribution in porosity, pore size and depth along the radius of the samples. Symmetrical arrangements of morphology gradient were successfully formulated radially on porous films and the formation was attributed to decreasing current density radially inward on the silicon surface exposed to Triton(®) X-100 cont ...[more]

PMID: 27103508

Similar Datasets

Tailored porous silicon microparticles: fabrication and properties.

Project description:The use of mesoporous silicon particles for drug delivery has been widely explored thanks to their biodegradability and biocompatibility. The ability to tailor the physicochemical properties of porous silicon at the micro- and nanoscale confers versatility to this material. A method for the fabrication of highly reproducible, monodisperse, mesoporous silicon particles with controlled physical characteristics through electrochemical etching of patterned silicon trenches is presented. The particle size is tailored in the micrometer range and pore size in the nanometer range, the shape from tubular to discoidal to hemispherical, and the porosity from 46 to over 80%. In addition, the properties of the porous matrix are correlated with the loading of model nanoparticles (quantum dots) and their three-dimensional arrangement within the matrix is observed by transmission electron microscopy tomography. The methods developed in this study provide effective means to fabricate mesoporous silicon particles according to the principles of rational design for therapeutic vectors and to characterize the distribution of nanoparticles within the porous matrix.

| S-EPMC2920042 | biostudies-literature

The novel peptide HEADY specifies apical fate in a simple radially symmetric metazoan.

Project description:One of the first steps in animal development is axis formation, during which an uneven distribution of signals and/or transcription factors results in the establishment of polarity in the embryo. Hydra, one of the simplest metazoan animals, shows characteristics of a permanent embryo. Even adult polyps have a striking capacity to regenerate, suggesting that molecular mechanisms underlying de novo pattern formation are permanently active and self regulatory. Here we show that HEADY, a short, amidated peptide, plays a central role in the specification of apical fate in this simple metazoan. The HEADY gene, whose transcripts accumulate at the apical organizing center, is required for specification of apical fate, as disruption of HEADY function by dsRNA mediated interference (RNAi) results in severe defects in head formation. Conversely, an instructive role of HEADY in head specification is demonstrated by the application of synthetic HEADY peptide, which induces formation of secondary axes with head morphology. Thus, the HEADY peptide acts as developmental switch to pattern the apical-basal axis of Hydra, providing a first insight into how initial asymmetry is specified in lower metazoan animals.

| S-EPMC317037 | biostudies-literature

Fabrication of porous silicon by metal-assisted etching using highly ordered gold nanoparticle arrays.

Project description:A simple method for the fabrication of porous silicon (Si) by metal-assisted etching was developed using gold nanoparticles as catalytic sites. The etching masks were prepared by spin-coating of colloidal gold nanoparticles onto Si. An appropriate functionalization of the gold nanoparticle surface prior to the deposition step enabled the formation of quasi-hexagonally ordered arrays by self-assembly which were translated into an array of pores by subsequent etching in HF solution containing H2O2. The quality of the pattern transfer depended on the chosen preparation conditions for the gold nanoparticle etching mask. The influence of the Si surface properties was investigated by using either hydrophilic or hydrophobic Si substrates resulting from piranha solution or HF treatment, respectively. The polymer-coated gold nanoparticles had to be thermally treated in order to provide a direct contact at the metal/Si interface which is required for the following metal-assisted etching. Plasma treatment as well as flame annealing was successfully applied. The best results were obtained for Si substrates which were flame annealed in order to remove the polymer matrix - independent of the substrate surface properties prior to spin-coating (hydrophilic or hydrophobic). The presented method opens up new resources for the fabrication of porous silicon by metal-assisted etching. Here, a vast variety of metal nanoparticles accessible by well-established wet-chemical synthesis can be employed for the fabrication of the etching masks.

| S-EPMC3463426 | biostudies-other

Design and fabrication of silicon-tessellated structures for monocentric imagers.

Project description:Compared with conventional planar optical image sensors, a curved focal plane array can simplify the lens design and improve the field of view. In this paper, we introduce the design and implementation of a segmented, hemispherical, CMOS-compatible silicon image plane for a 10-mm diameter spherical monocentric lens. To conform to the hemispherical focal plane of the lens, we use flexible gores that consist of arrays of spring-connected silicon hexagons. Mechanical functionality is demonstrated by assembling the 20-?m-thick silicon gores into a hemispherical test fixture. We have also fabricated and tested a photodiode array on a silicon-on-insulator substrate for use with the curved imager. Optical testing shows that the fabricated photodiodes achieve good performance; the hemispherical imager enables a compact 160?° field of view camera with >80% fill factor using a single spherical lens.

| S-EPMC6444745 | biostudies-literature

Design, Fabrication, and Experimental Validation of Novel Flexible Silicon-Based Dry Sensors for Electroencephalography Signal Measurements.

Project description:Many commercially available electroencephalography (EEG) sensors, including conventional wet and dry sensors, can cause skin irritation and user discomfort owing to the foreign material. The EEG products, especially sensors, highly prioritize the comfort level during devices wear. To overcome these drawbacks for EEG sensors, this paper designs Societe Generale de Surveillance S [Formula: see text] A [Formula: see text] (SGS)-certified, silicon-based dry-contact EEG sensors (SBDSs) for EEG signal measurements. According to the SGS testing report, SBDSs extract does not irritate skin or induce noncytotoxic effects on L929 cells according to ISO10993-5. The SBDS is also lightweight, flexible, and nonirritating to the skin, as well as capable of easily fitting to scalps without any skin preparation or use of a conductive gel. For forehead and hairy sites, EEG signals can be measured reliably with the designed SBDSs. In particular, for EEG signal measurements at hairy sites, the acicular and flexible design of SBDS can push the hair aside to achieve satisfactory scalp contact, as well as maintain low skin-electrode interface impedance. Results of this paper demonstrate that the proposed sensors perform well in the EEG measurements and are feasible for practical applications.

| S-EPMC4848051 | biostudies-literature

Design and fabrication of hierarchically porous carbon with a template-free method.

Project description:Fabrication of hierarchically porous carbon materials (HPCs) with high surface area and pore volume has always been pursued. However, the currently effective template methods and acid/base activation strategies suffer from the drawbacks of either high costs or tedious steps. Herein, HPCs with 3D macro-mesopores and short-range meso-micropores were fabricated via an easy and sustainable two-step method from biomass. Macro-mesopores were constructed by slightly accumulation/aggregation of carbon spheres ranging from 60?nm to 80?nm, providing efficient mass diffusion pathways. Short-range mesopores and micropores with high electrolyte accessibility were developed in these spheres by air activation. The obtained HPCs showed surface area values up to 1306?m(2)/g and high mesopore volume proportion (63.9%). They demonstrated excellent capacitance and low equivalent series resistance (ESR) as supercapacitor electrode materials, suggesting the efficient diffusion and adsorption of electrolyte ions in the designed hierarchically porous structure.

| S-EPMC4162313 | biostudies-literature

Computational design of a symmetric homodimer using ?-strand assembly.

Project description:Computational design of novel protein-protein interfaces is a test of our understanding of protein interactions and has the potential to allow modification of cellular physiology. Methods for designing high-affinity interactions that adopt a predetermined binding mode have proved elusive, suggesting the need for new strategies that simplify the design process. A solvent-exposed backbone on a ?-strand is thought of as "sticky" and ?-strand pairing stabilizes many naturally occurring protein complexes. Here, we computationally redesign a monomeric protein to form a symmetric homodimer by pairing exposed ?-strands to form an intermolecular ?-sheet. A crystal structure of the designed complex closely matches the computational model (rmsd = 1.0 Å). This work demonstrates that ?-strand pairing can be used to computationally design new interactions with high accuracy.

| S-EPMC3251150 | biostudies-literature

Stamping Fabrication of Flexible Planar Micro?Supercapacitors Using Porous Graphene Inks

Project description:Abstract High performance, flexibility, safety, and robust integration for micro?supercapacitors (MSCs) are of immense interest for the urgent demand for miniaturized, smart energy?storage devices. However, repetitive photolithography processes in the fabrication of on?chip electronic components including various photoresists, masks, and toxic etchants are often not well?suited for industrial production. Here, a cost?effective stamping strategy is developed for scalable and rapid preparation of graphene?based planar MSCs. Combining stamps with desired shapes and highly conductive graphene inks, flexible MSCs with controlled structures are prepared on arbitrary substrates without any metal current collectors, additives, and polymer binders. The interdigitated MSC exhibits high areal capacitance up to 21.7 mF cm?2 at a current of 0.5 mA and a high power density of 6 mW cm?2 at an energy density of 5 µWh cm?2. Moreover, the MSCs show outstanding cycling performance and remarkable flexibility over 10 000 charge–discharge cycles and 300 bending cycles. In addition, the capacitance and output voltage of the MSCs are easily adjustable through interconnection with well?defined arrangements. The efficient, rapid manufacturing of the graphene?based interdigital MSCs with outstanding flexibility, shape diversity, and high areal capacitance shows great potential in wearable and portable electronics. Highly flexible micro?supercapacitors are manufactured on a large scale by a cost?effective stamping strategy with highly conductive graphene inks. The efficient production of the flexible micro?supercapacitor devices with outstanding shape diversity, high areal capacitance, and excellent cycling stability shows great potential for future applications in portable and wearable electronics.

| S-EPMC7539196 | biostudies-literature

Bioconjugate functionalization of thermally carbonized porous silicon using a radical coupling reaction.

Project description:The high stability of Salonen's thermally carbonized porous silicon (TCPSi) has attracted attention for environmental and biochemical sensing applications, where corrosion-induced zero point drift of porous silicon-based sensor elements has historically been a significant problem. Prepared by the high temperature reaction of porous silicon with acetylene gas, the stability of this silicon carbide-like material also poses a challenge--many sensor applications require a functionalized surface, and the low reactivity of TCPSi has limited the ability to chemically modify its surface. This work presents a simple reaction to modify the surface of TCPSi with an alkyl carboxylate. The method involves radical coupling of a dicarboxylic acid (sebacic acid) to the TCPSi surface using a benzoyl peroxide initiator. The grafted carboxylic acid species provides a route for bioconjugate chemical modification, demonstrated in this work by coupling propylamine to the surface carboxylic acid group through the intermediacy of pentafluorophenol and 1-ethyl-3-[3-dimethylaminopropyl]carbodiimide hydrochloride (EDC). The stability of the carbonized porous Si surface, both before and after chemical modification, is tested in phosphate buffered saline solution and found to be superior to either hydrosilylated (with undecylenic acid) or thermally oxidized porous Si surfaces.

| S-EPMC3051409 | biostudies-literature

Hybrid Porous Silicon Biosensors Using Plasmonic and Fluorescent Nanomaterials: A Mini Review.

Project description:During the last two decades, porous silicon (PSi) has been proposed as a high-performance biosensing platform due to its biocompatibility, surface tailorability, and reproducibility. This review focuses on the recent developments and progress in the area related to hybrid PSi biosensors using plasmonic metal nanoparticles (MNPs), fluorescent quantum dots (QDs), or a combination of both MNPs and QDs for creating hybrid nanostructured architectures for ultrasensitive detection of biomolecules. The review discusses the mechanisms of sensitivity enhancement based on Localized Surface Plasmon Resonance (LSPR) of MNPs, Fluorescence Resonance Energy Transfer (FRET) in the case of MNPs/QDs donor-acceptor interactions, and photoluminescence/fluorescence enhancement resulting from the embedded fluorescent QDs inside the PSi microcavity. The review highlights the key features of hybrid PSi/MNPs/QDs biosensors for dual-mode detection applications.

| S-EPMC7272471 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data