Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Bioactive Carbon Nanotube-Based Ink for Printing 2D and 3D Flexible Electronics.

ABSTRACT: The development of electrically conductive carbon nanotube-based inks is reported. Using these inks, 2D and 3D structures are printed on various flexible substrates such as paper, hydrogels, and elastomers. The printed patterns have mechanical and electrical properties that make them beneficial for various biological applications.

SUBMITTER: Shin SR

PROVIDER: S-EPMC4850092 | biostudies-literature | 2016 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

A Bioactive Carbon Nanotube-Based Ink for Printing 2D and 3D Flexible Electronics.

Shin Su Ryon SR Farzad Raziyeh R Tamayol Ali A Manoharan Vijayan V Mostafalu Pooria P Zhang Yu Shrike YS Akbari Mohsen M Jung Sung Mi SM Kim Duckjin D Comotto Mattia M Annabi Nasim N Al-Hazmi Faten Ebrahim FE Dokmeci Mehmet R MR Khademhosseini Ali A Khademhosseini Ali A

Advanced materials (Deerfield Beach, Fla.) 20160224 17

The development of electrically conductive carbon nanotube-based inks is reported. Using these inks, 2D and 3D structures are printed on various flexible substrates such as paper, hydrogels, and elastomers. The printed patterns have mechanical and electrical properties that make them beneficial for various biological applications. ...[more]

PMID: 26915715

Similar Datasets

Gravure Printing of Water-based Silver Nanowire ink on Plastic Substrate for Flexible Electronics.

Project description:Gravure printing is a promising technique for large-scale printed electronics. However, gravure printing of silver nanowires (AgNWs) so far has been limited in terms of resolution and electrical conductivity. In this study, gravure printing of water-based AgNW ink on a flexible substrate is demonstrated. By tailoring the ink properties, printing conditions and post-printing treatment, gravure printing enables printing of high-resolution, highly conductive AgNW patterns in large areas, with resolution as fine as 50 µm and conductivity as high as 5.34 × 104 S cm-1. The printed AgNW patterns on the flexible substrate show excellent flexibility under repeated bending. All these characteristics demonstrate the excellent potential of gravure printing of AgNWs for developing large-area flexible electronics.

| S-EPMC6181915 | biostudies-literature

Flexible and Stretchable Bio-Integrated Electronics Based on Carbon Nanotube and Graphene.

Project description:Scientific and engineering progress associated with increased interest in healthcare monitoring, therapy, and human-machine interfaces has rapidly accelerated the development of bio-integrated multifunctional devices. Recently, compensation for the cons of existing materials on electronics for health care systems has been provided by carbon-based nanomaterials. Due to their excellent mechanical and electrical properties, these materials provide benefits such as improved flexibility and stretchability for conformal integration with the soft, curvilinear surfaces of human tissues or organs, while maintaining their own unique functions. This review summarizes the most recent advanced biomedical devices and technologies based on two most popular carbon based materials, carbon nanotubes (CNTs) and graphene. In the beginning, we discuss the biocompatibility of CNTs and graphene by examining their cytotoxicity and/or detrimental effects on the human body for application to bioelectronics. Then, we scrutinize the various types of flexible and/or stretchable substrates that are integrated with CNTs and graphene for the construction of high-quality active electrode arrays and sensors. The convergence of these carbon-based materials and bioelectronics ensures scalability and cooperativity in various fields. Finally, future works with challenges are presented in bio-integrated electronic applications with these carbon-based materials.

| S-EPMC6073353 | biostudies-literature

Shape-Controlled, Self-Wrapped Carbon Nanotube 3D Electronics.

Project description:The mechanical flexibility and structural softness of ultrathin devices based on organic thin films and low-dimensional nanomaterials have enabled a wide range of applications including flexible display, artificial skin, and health monitoring devices. However, both living systems and inanimate systems that are encountered in daily lives are all 3D. It is therefore desirable to either create freestanding electronics in a 3D form or to incorporate electronics onto 3D objects. Here, a technique is reported to utilize shape-memory polymers together with carbon nanotube flexible electronics to achieve this goal. Temperature-assisted shape control of these freestanding electronics in a programmable manner is demonstrated, with theoretical analysis for understanding the shape evolution. The shape control process can be executed with prepatterned heaters, desirable for 3D shape formation in an enclosed environment. The incorporation of carbon nanotube transistors, gas sensors, temperature sensors, and memory devices that are capable of self-wrapping onto any irregular shaped-objects without degradations in device performance is demonstrated.

| S-EPMC5115380 | biostudies-literature

Aligned 2D carbon nanotube liquid crystals for wafer-scale electronics.

Project description:[Figure: see text].

| S-EPMC8442871 | biostudies-literature

High-Throughput Fabrication of Flexible and Transparent All-Carbon Nanotube Electronics.

Project description:This study reports a simple and effective technique for the high-throughput fabrication of flexible all-carbon nanotube (CNT) electronics using a photosensitive dry film instead of traditional liquid photoresists. A 10 in. sized photosensitive dry film is laminated onto a flexible substrate by a roll-to-roll technology, and a 5 µm pattern resolution of the resulting CNT films is achieved for the construction of flexible and transparent all-CNT thin-film transistors (TFTs) and integrated circuits. The fabricated TFTs exhibit a desirable electrical performance including an on-off current ratio of more than 105, a carrier mobility of 33 cm2 V-1 s-1, and a small hysteresis. The standard deviations of on-current and mobility are, respectively, 5% and 2% of the average value, demonstrating the excellent reproducibility and uniformity of the devices, which allows constructing a large noise margin inverter circuit with a voltage gain of 30. This study indicates that a photosensitive dry film is very promising for the low-cost, fast, reliable, and scalable fabrication of flexible and transparent CNT-based integrated circuits, and opens up opportunities for future high-throughput CNT-based printed electronics.

| S-EPMC5979759 | biostudies-literature

Carbon Nanotube Ink Dispersed by Chitin Nanocrystals for Thermoelectric Converter for Self-Powering Multifunctional Wearable Electronics.

Project description:The screen-printing process of conductive ink can realize simple and large-scale manufacture of micro/nano patterns for producing wearable electronic products. Herein, chitin nanocrystals (ChNCs) are used as a dispersant for the preparation of multiwalled carbon nanotube (MWCNT) ink with high viscosity and uniformity by ultrasound treatment. ChNCs can interact with MWCNT in noncovalent ways, including π-π and hydrophobic interactions. ChNCs/MWCNT (CCNT) ink does not aggregate even after standing for 3 months with a maximum MWCNT concentration of 33 mg mL-1 and dispersion efficiency of 91.1%. Using CCNT ink, a paper-based thermoelectric generator (TEG) is manufactured by screen-printing technology. With good thermoelectric and strain sensing properties, CCNT coated paper can stably collect human energy at room temperature to realize self-powering. The CCNT coated paper-based TEG can convert thermal voltage signals into musical notes, monitor the changes in human behavior and respiratory rate, and monitor joint movements. Moreover, CCNT coated paper has no cytotoxicity by CCK-8 and live/dead staining. This work puts forward a strategy of green preparation of MWCNT-based ink by adding renewable chitin, which opens up a new way to apply MWCNT-based ink in self-powering wearable multifunctional sensors.

| S-EPMC9685456 | biostudies-literature

Radio frequency analog electronics based on carbon nanotube transistors.

Project description:The potential to exploit single-walled carbon nanotubes (SWNTs) in advanced electronics represents a continuing, major source of interest in these materials. However, scalable integration of SWNTs into circuits is challenging because of difficulties in controlling the geometries, spatial positions, and electronic properties of individual tubes. We have implemented solutions to some of these challenges to yield radio frequency (RF) SWNT analog electronic devices, such as narrow band amplifiers operating in the VHF frequency band with power gains as high as 14 dB. As a demonstration, we fabricated nanotube transistor radios, in which SWNT devices provide all of the key functions, including resonant antennas, fixed RF amplifiers, RF mixers, and audio amplifiers. These results represent important first steps to practical implementation of SWNTs in high-speed analog circuits. Comparison studies indicate certain performance advantages over silicon and capabilities that complement those in existing compound semiconductor technologies.

| S-EPMC2234156 | biostudies-literature

Uniform and Stable Aerosol Jet Printing of Carbon Nanotube Thin-Film Transistors by Ink Temperature Control.

Project description:Semiconducting carbon nanotube (CNT) networks exhibit electrical, mechanical, and chemical properties attractive for thin-film applications, and printing allows for scalable and economically favorable fabrication of CNT thin-film transistors (TFTs). However, device-to-device variation of printed CNT-TFTs remains a concern, which largely stems from variations in printed CNT thin-film morphology and resulting properties. In this work, we overcome the challenges associated with printing uniformity and demonstrate an aerosol jet printing process that yields devices exhibiting a hole mobility of μh = 12.5 cm2/V·s with a relative standard deviation as small as 4% (from over 38 devices). The enabling factors of such high uniformity include control of the CNT ink bath temperature during printing, ink formulation with nonvolatile and viscosifying additives, and a thermal treatment for polymer removal. It is discovered that a low CNT ink temperature benefits aerosol jet printing uniformity and stability in both short-term (∼1 min) and long-term (∼1 h) printing settings. These findings shed light on the effect of a commonly overlooked dimension of CNT aerosol jet printing and provide a practical strategy for large-scale, high-consistency realization of CNT-TFTs.

| S-EPMC7895321 | biostudies-literature

Printing Highly Controlled Suspended Carbon Nanotube Network on Micro-patterned Superhydrophobic Flexible Surface.

Project description:Suspended single-walled carbon nanotubes (SWCNTs) offer unique functionalities for electronic and electromechanical systems. Due to their outstanding flexible nature, suspended SWCNT architectures have great potential for integration into flexible electronic systems. However, current techniques for integrating SWCNT architectures with flexible substrates are largely absent, especially in a manner that is both scalable and well controlled. Here, we present a new nanostructured transfer paradigm to print scalable and well-defined suspended nano/microscale SWCNT networks on 3D patterned flexible substrates with micro- to nanoscale precision. The underlying printing/transfer mechanism, as well as the mechanical, electromechanical, and mechanical resonance properties of the suspended SWCNTs are characterized, including identifying metrics relevant for reliable and sensitive device structures. Our approach represents a fast, scalable and general method for building suspended nano/micro SWCNT architectures suitable for flexible sensing and actuation systems.

| S-EPMC4625127 | biostudies-literature

VOC Emissions and Formation Mechanisms from Carbon Nanotube Composites during 3D Printing.

Project description:A commercially available, 3D printer nanocomposite filament of carbon nanotubes (CNTs) and acrylonitrile-butadiene-styrene (ABS) was analyzed with respect to its VOC emissions during simulated fused deposition modeling (FDM) and compared with a regular ABS filament. VOC emissions were quantified and characterized under a variety of conditions to simulate the thermal degradation that takes place during FDM. Increasing the residence time and temperature resulted in significant increases in VOC emissions, and the oxygen content of the reaction gas influenced the VOC profile. In agreement with other studies, the primary emitted VOC was styrene. Multiple compounds are reported in this work for the first time as having formed during FDM, including 4-vinylcyclohexene and 2-phenyl-2-propanol. Our results show that printing 222.0 g of filament is enough to surpass the reference concentration for inhalation exposure of 1 mg/m3 according to the EPA's Integrated Risk Information System (IRIS). The presence of CNTs in the filament influenced VOC yields and product ratios through three types of surface interactions: (1) adsorption of O2 on CNTs lowers the available O2 for oxidation of primary backbone cleavage intermediates, (2) adsorption of styrene and other VOCs to CNTs leads to surface-catalyzed degradation, and (3) CNTs act as a trap for certain VOCs and prevent them from entering vapor emissions. While the presence of CNTs in the filament lowered the total VOC emission under most experimental conditions, they increased the emission of the most hazardous VOCs, such as α-methylstyrene and benzaldehyde. The present study has identified an increased risk associated with the use of CNT nanocomposites in 3D printing.

| S-EPMC6532411 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data