Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Spectral reflectance data of a high temperature stable solar selective coating based on MoSi2 -Si3N4.

ABSTRACT: Data of optical performance, thermal stability and ageing are given for solar selective coatings (SSC) based on a novel MoSi2-Si3N4 absorbing composite. SSC have been prepared as multilayer stacks formed by silver as metallic infrared reflector, a double layer composite and an antireflective layer (doi: 10.1016/j.solmat.2016.04.001 [1]). Spectroscopic reflectance data corresponding to the optical performance of samples after moderate vacuum annealing at temperatures up to 600 °C and after ageing test of more than 200 h with several heating-cooling cycles are shown here.

SUBMITTER: Hernandez-Pinilla D

PROVIDER: S-EPMC4857402 | biostudies-literature | 2016 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Spectral reflectance data of a high temperature stable solar selective coating based on MoSi2 -Si3N4.

Hernández-Pinilla D D Rodríguez-Palomo A A Álvarez-Fraga L L Céspedes E E Prieto J E JE Muñoz-Martín A A Prieto C C

Data in brief 20160423

Data of optical performance, thermal stability and ageing are given for solar selective coatings (SSC) based on a novel MoSi2-Si3N4 absorbing composite. SSC have been prepared as multilayer stacks formed by silver as metallic infrared reflector, a double layer composite and an antireflective layer (doi: 10.1016/j.solmat.2016.04.001 [1]). Spectroscopic reflectance data corresponding to the optical performance of samples after moderate vacuum annealing at temperatures up to 600 °C and after ageing ...[more]

PMID: 27182544

Similar Datasets

Spectral Knowledge (SK-UTALCA): Software for Exploratory Analysis of High-Resolution Spectral Reflectance Data on Plant Breeding.

Project description:This article describes public, free software that provides efficient exploratory analysis of high-resolution spectral reflectance data. Spectral reflectance data can suffer from problems such as poor signal to noise ratios in various wavebands or invalid measurements due to changes in incoming solar radiation or operator fatigue leading to poor orientation of sensors. Thus, exploratory data analysis is essential to identify appropriate data for further analyses. This software overcomes the problem that analysis tools such as Excel are cumbersome to use for the high number of wavelengths and samples typically acquired in these studies. The software, Spectral Knowledge (SK-UTALCA), was initially developed for plant breeding, but it is also suitable for other studies such as precision agriculture, crop protection, ecophysiology plant nutrition, and soil fertility. Various spectral reflectance indices (SRIs) are often used to relate crop characteristics to spectral data and the software is loaded with 255 SRIs which can be applied quickly to the data. This article describes the architecture and functions of SK-UTALCA and the features of the data that led to the development of each of its modules.

| S-EPMC5220079 | biostudies-literature

Spectral data of specular reflectance, narrow-angle transmittance and angle-resolved surface scattering of materials for solar concentrators.

Project description:The spectral specular reflectance of conventional and novel reflective materials for solar concentrators is measured with an acceptance angle of 17.5 mrad over the wavelength range 300-2500 nm at incidence angles 15-60° using a spectroscopic goniometry system. The same experimental setup is used to determine the spectral narrow-angle transmittance of semi-transparent materials for solar collector covers at incidence angles 0-60°. In addition, the angle-resolved surface scattering of reflective materials is recorded by an area-scan CCD detector over the spectral range 350-1050 nm. A comprehensive summary, discussion, and interpretation of the results are included in the associated research article "Spectral reflectance, transmittance, and angular scattering of materials for solar concentrators" in Solar Energy Materials and Solar Cells.

| S-EPMC4706600 | biostudies-literature

Highly solar reflectance and infrared transparent porous coating for non-contact heat dissipations.

Project description:Passive daytime radiative cooling (PDRC) can dissipate heat to outer space with high solar reflectance (R¯solar) and thermal emittance (ε¯LWIR) in the atmospheric transmission window. However, for the non-contact heat dissipation, besides the high R¯solar , a high infrared transmittance (τ¯LWIR) is needed to directly emit thermal radiation through the IR-transparent coating to outer space. In this work, An IR-transparent porous PE (P-PE) coating with R¯solar = 0.96 and τ¯LWIR = 0.88 was prepared for non-contact heat dissipations. Under the direct sunlight of 860 W m-2, the IR-transparent coating obtained a 4°C lower heater temperature than the normal PDRC coating under the same condition. In addition, the spectral reflectance of the P-PE coating after immersing in air or water changed little, which showed excellent durability for long-term outdoor applications. These results indicate the P-PE coating can be a potential IR-transparent coating for non-contact heat dissipations under direct sunlight.

| S-EPMC9293775 | biostudies-literature

Scalable PbS Quantum Dot Solar Cell Production by Blade Coating from Stable Inks.

Project description:The recent development of phase transfer ligand exchange methods for PbS quantum dots (QD) has enhanced the performance of quantum dots solar cells and greatly simplified the complexity of film deposition. However, the dispersions of PbS QDs (inks) used for film fabrication often suffer from colloidal instability, which hinders large-scale solar cell production. In addition, the wasteful spin-coating method is still the main technique for the deposition of QD layer in solar cells. Here, we report a strategy for scalable solar cell fabrication from highly stable PbS QD inks. By dispersing PbS QDs capped with CH3NH3PbI3 in 2,6-difluoropyridine (DFP), we obtained inks that are colloidally stable for more than 3 months. Furthermore, we demonstrated that DFP yields stable dispersions even of large diameter PbS QDs, which are of great practical relevance owing to the extended coverage of the near-infrared region. The optimization of blade-coating deposition of DFP-based inks enabled the fabrication of PbS QD solar cells with power conversion efficiencies of up to 8.7%. It is important to underline that this performance is commensurate with the devices made by spin coating of inks with the same ligands. A good shelf life-time of these inks manifests itself in the comparatively high photovoltaic efficiency of 5.8% obtained with inks stored for more than 120 days.

| S-EPMC7863069 | biostudies-literature

Colored and paintable bilayer coatings with high solar-infrared reflectance for efficient cooling.

Project description:Solar reflective and thermally emissive surfaces offer a sustainable way to cool objects under sunlight. However, white or silvery reflectance of these surfaces does not satisfy the need for color. Here, we present a paintable bilayer coating that simultaneously achieves color and radiative cooling. The bilayer comprises a thin, visible-absorptive layer atop a nonabsorptive, solar-scattering underlayer. The top layer absorbs appropriate visible wavelengths to show specific colors, while the underlayer maximizes the reflection of near-to-short wavelength infrared (NSWIR) light to reduce solar heating. Consequently, the bilayer attains higher NSWIR reflectance (by 0.1 to 0.51) compared with commercial paint monolayers of the same color and stays cooler by as much as 3.0° to 15.6°C under strong sunlight. High NSWIR reflectance of 0.89 is realized in the blue bilayer. The performances show that the bilayer paint design can achieve both color and efficient radiative cooling in a simple, inexpensive, and scalable manner.

| S-EPMC7182418 | biostudies-literature

Superinsulating BNNS/PVA Composite Aerogels with High Solar Reflectance for Energy-Efficient Buildings.

Project description:With the mandate of worldwide carbon neutralization, pursuing comfortable living environment while consuming less energy is an enticing and unavoidable choice. Novel composite aerogels with super thermal insulation and high sunlight reflection are developed for energy-efficient buildings. A solvent-assisted freeze-casting strategy is used to produce boron nitride nanosheet/polyvinyl alcohol (BNNS/PVA) composite aerogels with a tailored alignment channel structure. The effects of acetone and BNNS fillers on microstructures and multifunctional properties of aerogels are investigated. The acetone in the PVA suspension enlarges the cell walls to suppress the shrinkage, giving rise to a lower density and a higher porosity, accompanied with much diminished heat conduction throughout the whole product. The addition of BNNS fillers creates whiskers in place of disconnected transverse ligaments between adjacent cell walls, further ameliorating the thermal insulation transverse to the cell wall direction. The resultant BNNS/PVA aerogel delivers an ultralow thermal conductivity of 23.5 mW m-1 K-1 in the transverse direction. The superinsulating aerogel presents both an infrared stealthy capability and a high solar reflectance of 93.8% over the whole sunlight wavelength, far outperforming commercial expanded polystyrene foams with reflective coatings. The anisotropic BNNS/PVA composite aerogel presents great potential for application in energy-saving buildings.

| S-EPMC8811070 | biostudies-literature

Reconciling the statistics of spectral reflectance and colour.

Project description:The spectral reflectance function of a surface specifies the fraction of the illumination reflected by it at each wavelength. Jointly with the illumination spectral density, this function determines the apparent colour of the surface. Models for the distribution of spectral reflectance functions in the natural environment are considered. The realism of the models is assessed in terms of the individual reflectance functions they generate, and in terms of the overall distribution of colours which they give rise to. Both realism assessments are made in comparison to empirical datasets. Previously described models (PCA- and fourier-based) of reflectance function statistics are evaluated, as are improved versions; and also a novel model, which synthesizes reflectance functions as a sum of sigmoid functions. Key model features for realism are identified. The new sigmoid-sum model is shown to be the most realistic, generating reflectance functions that are hard to distinguish from real ones, and accounting for the majority of colours found in natural images with the exception of an abundance of vegetation green and sky blue.

| S-EPMC6839875 | biostudies-literature

Soybean Aphid (Hemiptera: Aphididae) Affects Soybean Spectral Reflectance.

Project description:Soybean aphid, Aphis glycines Matsumura (Hemiptera: Aphididae), is the most economically important insect pest of soybean in the north central United States. Scouting-based integrated pest management (IPM) programs could become more efficient and more widely adopted by using plant spectral reflectance to estimate soybean aphid injury. Our objective was to determine whether plant spectral reflectance is affected by soybean aphid feeding. Field trials were conducted in 2013 and 2014 using caged plots. Early-, late-, and noninfested treatments were established to create a gradient of soybean aphid pressure. Whole-plant soybean aphid densities were recorded weekly. Measurements of plant spectral reflectance occurred on two sample dates per year. Simple linear regression models were used to test the effect of cumulative aphid-days (CAD) on plant spectral reflectance at 680?nm (RED) and 800?nm (NIR), normalized difference vegetation index (NDVI), and relative chlorophyll content. Data indicated that CAD had no effect on canopy-level RED reflectance, but CAD decreased canopy-level NIR reflectance and NDVI. Canopy- and leaf-level measurements typically indicated similar plant spectral response to increasing CAD. CAD generally had no effect on relative chlorophyll content. The present study provides the first documentation that remote sensing holds potential for detecting changes in plant spectral reflectance induced by soybean aphid. The use of plant spectral reflectance in soybean aphid management may assist future IPM programs to reduce sampling costs and prevent prophylactic insecticide sprays.

| S-EPMC4689275 | biostudies-literature

Data of plant diversity, spectral reflectance at specie level and satellite spectral variables from the largest dry forest nucleus in South America.

Project description:The use of satellite remote sensing makes it possible to acquire useful information about the environment, since it presents tools capable of assisting the practical search of information related to species richness. Here we present data on richness and Shannon index from phytosociological researches, vegetation indices and individual bands spectral reflectance from satellite images and leaf-level spectral reflectance from eight Caatinga species. For further interpretation of the data presented in this article, please see the research article "Predicting plant species richness with satellite images in the largest dry forest nucleus in South America" [1].

| S-EPMC6717164 | biostudies-literature

Efficient Volumetric Absorption Solar Thermal Platforms Employing Thermally Stable - Solar Selective Nanofluids Engineered from Used Engine Oil.

Project description:We report a low cost and scalable method to synthesize solar selective nanofluids from 'used engine oil'. The as-prepared nanofluids exhibit excellent long-term stability (presently tested up to 6 months under undisturbed stagnant conditions at room temperature) and photo-thermal conversion efficiency. Moreover, these were found to retain their stability and functional characteristics even after extended periods (72?hours) of high temperature (300°C) heating, ultra violet light exposure and thermal cyclic loading. Building upon it, we have been able to successfully engineer an efficient volumetric absorption solar thermal platform that employs the as-prepared nanofluids and achieves higher steady state temperatures (approximately 5% higher) relative to the conventional surface absorption based solar thermal system under the sun. The developed volumetric absorption solar thermal platform could prove to be significant step in the evolution of efficient solar thermal systems which could potentially be deployed for host of applications ranging from solar driven heating, air-conditioning, and desalination units to solar energy electricity generation systems.

| S-EPMC6646354 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data