Highly compact refractive index sensor based on stripe waveguides for lab-on-a-chip sensing applications.
Ontology highlight
ABSTRACT:
SUBMITTER: Perera C
PROVIDER: S-EPMC4901982 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Hydrogel waveguides have found increased use for variety of applications where biocompatibility and flexibility are important. In this work, we demonstrate the use of polyethylene glycol diacrylate (PEGDA) waveguides to realize a monolithic lab-on-a-chip device. We performed a comprehensive study on the swelling and optical properties for different chain lengths and concentrations in order to realize an integrated biocompatible waveguide in a microfluidic device for chemical sensing. Waveguiding properties of PEGDA hydrogel were used to guide excitation light into a microfluidic channel to measure the fluorescence emission profile of rhodamine 6G as well as collect the fluorescence signal from the same device. Overall, this work shows the potential of hydrogel waveguides to facilitate delivery and collection of optical signals for potential use in wearable and implantable lab-on-a-chip devices.
| S-EPMC6806100 | biostudies-literature
Project description:Refractive index sensors based on surface plasmon resonance (SPR) promise to deliver high sensitivities. However, these sensitivities depend on the derivative of the monitored SPR parameters near resonance, so this dependency leads to a relatively narrow detection range for refractive index changes. Herein, we introduce an idea to improve the detection range refractive index through a high-contrast-index curved waveguide surrounded with an outer gold ring. The proposed detection technique, based on the output power measurement of the curved waveguide, offers a linear response over an ultrabroad range of the refractive index for a surrounding medium from n = 1 to 2.36. Meanwhile, an theoretically ultrahigh refractive index resolution (RIU) of 4.53 × 10-10 could be accessible for such a broad testing range, available for both gas and aqueous chemical sample refractive indices Furthermore, the power detection approach enables an integrated photodetector for a lab-on-chip sensor platform, revealing a high potential for a multifunctional, compact, and highly sensitive sensor-on-chip device.
| S-EPMC6435793 | biostudies-literature
Project description:In this letter, we find that gradient index metamaterials (GIMs) could be utilized to manipulate wave propagation in waveguides. Through manipulating the conversion between propagating wave and surface wave, we can design some interesting applications in waveguides, such as controlling transmission effect, realizing bending waveguide and achieving waveguide splitting effect. These devices not only work for both transverse electric and magnetic polarized waves, but also function for a broadband of spectra. Numerical simulations are performed to verify our findings.
| S-EPMC4677397 | biostudies-literature
Project description:High sensitivity and easy integration with microfabrication techniques has made silicon photonics one of the leading technologies used to build biosensors for diagnostic applications. Here we introduce a new silicon dioxide based optofluidic platform having a planar solid-core (SC) waveguide orthogonally intersecting a liquid-core (LC) waveguide with high refractive index ZnI2 salt solution as core. This enables both more uniform collection of particle fluorescence by the core mode and its propagation to an off-chip detector. This approach results in ultra-high sensitivity performance, demonstrated by achieving 8X enhancement in signal-to-noise ratio, a 45x increase in detection efficiency, and a 100x lower detection limit of 80 aM of fluorescent nanobeads. This represents a key step towards an ultrasensitive biosensor system for analyzing pathogens at clinical concentrations.
| S-EPMC8117828 | biostudies-literature
Project description:We report the synthesis of Ag nanocubes by using a sodium sulfide assisted solvothermal method. Small edge-length nanocubes (32 and 44 nm) were obtained at 145 and 155 °C reaction temperature in the synthesis process. The refractive index sensitivity of synthesized nanocubes was investigated with an aqueous solution of glucose. The refractive index sensitivity of 161 nm per RIU was found in the colloidal dispersion of nanocubes. On the LSPR chip made by immobilization of nanocubes on the (3-aminopropyl)trimethoxysilane modified glass coverslip, the obtained sensitivity was 116 nm per RIU. Detection of formaldehyde in water and milk samples was also performed with nanocubes of edge-length of 44 nm. Formaldehyde detection was performed by utilizing the interaction of the aryl amine of 4-aminothiophenol immobilized on the nanocubes and electrophilic carbon atom of the formaldehyde. In water and in diluted milk, the formaldehyde sensitivity of 0.62 and 0.29 nm μM-1 was obtained, respectively.
| S-EPMC8695105 | biostudies-literature
Project description:Optical fiber ball resonators based on single-mode fibers in the infrared range are an emerging technology for refractive index sensing and biosensing. These devices are easy and rapid to fabricate using a CO2 laser splicer and yield a very low finesse reflection spectrum with a quasi-random pattern. In addition, they can be functionalized for biosensing by using a thin-film sputtering method. A common problem of this type of device is that the spectral response is substantially unknown, and poorly correlated with the size and shape of the spherical device. In this work, we propose a detection method based on Karhunen-Loeve transform (KLT), applied to the undersampled spectrum measured by an optical backscatter reflectometer. We show that this method correctly detects the response of the ball resonator in any working condition, without prior knowledge of the sensor under interrogation. First, this method for refractive index sensing of a gold-coated resonator is applied, showing 1594 RIU-1 sensitivity; then, this concept is extended to a biofunctionalized ball resonator, detecting CD44 cancer biomarker concentration with a picomolar-level limit of detection (19.7 pM) and high specificity (30-41%).
| S-EPMC8537289 | biostudies-literature
Project description:We present a refractometric sensor based on quantum dot-embedded polystyrene microspheres. Optical resonances within a microsphere, known as whispering-gallery modes (WGMs), produce narrow spectral peaks. For sensing applications, spectral shifts of these peaks are sensitive to changes in the local refractive index. In this work, two-photon excited luminescence from the quantum dots couples into several WGMs within the microresonator. By optimizing the detection area, the spectral visibility of the WGMs is improved. The spectral shifts are measured as the surrounding index of the refraction changes. The experimental sensitivity is about five times greater than that predicted by the Mie theory.
| S-EPMC2682744 | biostudies-other
Project description:In this work, we present a highly-sensitive refractive index sensor based on metatronic nanocircuits operating at near-infrared spectral range. The structure is designed based on simple nanorod geometry and fabricated by nanopatterning of transparent conducting oxides. The functionality of these polarization dependent metatronic nanocircuits is enhanced by applying tunable response. This feature is investigated by depositing NH2 (Amine) groups via plasma polymerization technique on top of indium-tin-oxide nanorods. The dielectric constant of Amine groups is a function of their thickness, which can be controlled by the RF power and the time duration of the applied plasma polymerization process. The resonance wavelengths of nanocircuits shift to higher wavelength, as the dielectric constant of the deposited material increases. An excellent agreement between the design and experimental results are obtained. Our metatronic based nanosensor offers a high-sensitive performance of 1587?nm/RIU with a satisfactory figure of merit for this class of sensors.
| S-EPMC6065432 | biostudies-literature
Project description:We present an efficient refractive index sensor consisting of a heterostructure that contains an Au inverted honeycomb lattice as a main sensing element. Our design aims at maximizing the out-of-plane near-field distributions of the collective modes of the lattice mapping the sensor surroundings. These modes are further enhanced by a patterned SiO2 layer with the same inverted honeycomb lattice, an SiO2 spacer, and an Au mirror underneath the Au sensing layer that contribute to achieving a high performance. The optical response of the heterostructure was studied by numerical simulation. The results corresponding to one of the collective modes showed high sensitivity values ranging from 99 to 395 nm/RIU for relatively thin layers of test materials within 50 and 200 nm. In addition, the figure of merit of the sensor detecting slight changes of the refractive index of a water medium at a fixed wavelength was as high as 199 RIU-1. As an experimental proof of concept, the heterostructure was manufactured by a simple method based on electron beam lithography and the measured optical response reproduces the simulations. This work paves the way for improving both the sensitivity of plasmonic sensors and the signal of some enhanced surface spectroscopies.
| S-EPMC8147928 | biostudies-literature
Project description:As a noncentrosymmetric crystal with spin-polarized band structure, MoS2 nanomaterials have attracts increasing attention in many areas such as lithium ion batteries, flexible electronic devices, photoluminescence and valleytronics. The investigation of MoS2 is mainly focused on the electronics and spintronics instead of optics, which restrict its applications as key elements of photonics. In this work, we demonstrate the first observation of the polarization-dependent optical absorption of the MoS2 thin film, which is integrated onto an optical waveguide device. With this feature, a novel optical sensor combining MoS2 thin-film and a microfluidic structure has been constituted to achieve the sensitive monitoring of refractive index. Our work indicates the MoS2 thin film as a complementary material to graphene for the optical polarizer in the visible light range, and explores a new application direction of MoS2 nanomaterials for the construction of photonic circuits.
| S-EPMC4268638 | biostudies-other