Browse
Submit Data
Databases
API
Help

Dataset Information

35 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Metal organic frameworks as sorption media for volatile and semi-volatile organic compounds at ambient conditions.

ABSTRACT: In this research, we investigated the sorptive behavior of a mixture of 14 volatile and semi-volatile organic compounds (four aromatic hydrocarbons (benzene, toluene, p-xylene, and styrene), six C2-C5 volatile fatty acids (VFAs), two phenols, and two indoles) against three metal-organic frameworks (MOFs), i.e., MOF-5, Eu-MOF, and MOF-199 at 5 to 10 mPa VOC partial pressures (25 °C). The selected MOFs exhibited the strongest affinity for semi-volatile (polar) VOC molecules (skatole), whereas the weakest affinity toward was volatile (non-polar) VOC molecules (i.e., benzene). Our experimental results were also supported through simulation analysis in which polar molecules were bound most strongly to MOF-199, reflecting the presence of strong interactions of Cu(2+) with polar VOCs. In addition, the performance of selected MOFs was compared to three well-known commercial sorbents (Tenax TA, Carbopack X, and Carboxen 1000) under the same conditions. The estimated equilibrium adsorption capacity (mg.g(-1)) for the all target VOCs was in the order of; MOF-199 (71.7) >Carboxen-1000 (68.4) >Eu-MOF (27.9) >Carbopack X (24.3) >MOF-5 (12.7) >Tenax TA (10.6). Hopefully, outcome of this study are expected to open a new corridor to expand the practical application of MOFs for the treatment diverse VOC mixtures.

SUBMITTER: Vellingiri K

PROVIDER: S-EPMC4914961 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Detection of volatile organic compounds by weight-detectable sensors coated with metal-organic frameworks.

Project description:Detection of volatile organic compounds (VOCs) using weight-detectable quartz microbalance and silicon-based microcantilever sensors coated with crystalline metal-organic framework (MOF) thin films is described in this paper. The thin films of two MOFs were grown from COOH-terminated self-assembled monolayers onto the gold electrodes of sensor platforms. The MOF layers worked as the effective concentrators of VOC gases, and the adsorption/desorption processes of the VOCs could be monitored by the frequency changes of weight-detectable sensors. Moreover, the MOF layers provided VOC sensing selectivity to the weight-detectable sensors through the size-selective adsorption of the VOCs within the regulated nanospace of the MOFs.

| S-EPMC4150105 | biostudies-literature

Estimating Acute Cardiorespiratory Effects of Ambient Volatile Organic Compounds.

Project description:The health effects of ambient volatile organic compounds (VOCs) have received less attention in epidemiologic studies than other commonly measured ambient pollutants. In this study, we estimated acute cardiorespiratory effects of ambient VOCs in an urban population.Daily concentrations of 89 VOCs were measured at a centrally-located ambient monitoring site in Atlanta and daily counts of emergency department visits for cardiovascular diseases and asthma in the five-county Atlanta area were obtained for the 1998-2008 period. To understand the health effects of the large number of species, we grouped these VOCs a priori by chemical structure and estimated the associations between VOC groups and daily counts of emergency department visits in a time-series framework using Poisson regression. We applied three analytic approaches to estimate the VOC group effects: an indicator pollutant approach, a joint effect analysis, and a random effect meta-analysis, each with different assumptions. We performed sensitivity analyses to evaluate copollutant confounding.Hydrocarbon groups, particularly alkenes and alkynes, were associated with emergency department visits for cardiovascular diseases, while the ketone group was associated with emergency department visits for asthma.The associations observed between emergency department visits for cardiovascular diseases and alkenes and alkynes may reflect the role of traffic exhaust, while the association between asthma visits and ketones may reflect the role of secondary organic compounds. The different patterns of associations we observed for cardiovascular diseases and asthma suggest different modes of action of these pollutants or the mixtures they represent.

| S-EPMC5285400 | biostudies-literature

Metal-Organic Frameworks to Metal/Metal Oxide Embedded Carbon Matrix: Synthesis, Characterization and Gas Sorption Properties.

Project description:Three isostructural metal-organic frameworks, (MOFs), [Fe(OH)(1,4-NDC)] (1), [Al(OH)(1,4-NDC)] (2), and [In(OH)(1,4-NDC)] (3) have been synthesized hydrothermally by using 1,4-naphthalene dicarboxylate (1,4-NDC) as a linker. The MOFs were characterized using various techniques and further used as precursor materials for the synthesis of metal/metal oxide nanoparticles inserted in a carbon matrix through a simple thermal conversion method. The newly synthesized carbon materials were characterized by scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy analysis, powder X-ray diffraction and BET analysis. The results showed that the MOF-derived carbon composite materials maintained the morphology of the original MOF upon carbonization, and confirmed the insertion of metal/metal oxide particles in the carbon matrix.

| S-EPMC5455493 | biostudies-literature

Three-dimensional metal-intercalated covalent organic frameworks for near-ambient energy storage.

Project description:A new form of nanoporous material, metal intercalated covalent organic framework (MCOF) is proposed and its energy storage property revealed. Employing density functional and thermodynamical analysis, we find that stable, chemically active, porous materials could form by stacking covalent organic framework (COF) layers with metals as a gluing agent. Metal acts as active sites, while its aggregation is suppressed by a binding energy significantly larger than the corresponding cohesive energy of bulk metals. Two important parameters, metal binding and metal-metal separation, are tuned by selecting suitable building blocks and linkers when constructing COF layers. Systematic searches among a variety of elements and organic molecules identify Ca-intercalated COF with diphenylethyne units as optimal material for H2 storage, reaching a striking gravimetric density ~ 5 wt% at near-ambient conditions (300 K, 20 bar), in comparison to < 0.1 wt% for bare COF-1 under the same condition.

| S-EPMC3662009 | biostudies-other

Evaluation of Coriolis Micro Air Sampling to Detect Volatile and Semi-Volatile Organic Compounds.

Project description:There are several analytical procedures available for the monitoring of volatile organic compounds (VOCs) in the air, which differ mainly on sampling procedures. The Coriolis micro air sampler is a tool normally designed for biological air sampling. In this paper, the Coriolis micro bio collector is used to evaluate its ability to sample organic contaminants sampling and detecting them when combined GC-MS. We also compare the use of the Coriolis micro with a standardized sampling method, which is the use of a lung box with a Nalophan® bag. The results show that the Coriolis micro sampling method is suitable for the sampling of organic contaminants. Indeed, the Coriolis micro allows to sample and detect mainly semi-volatile molecules, while the lung box/Nalophan® bags allow to sample more volatile molecules (highly volatile and volatile). These results were confirmed in the controlled air lab with a slight difference with the field. The simultaneous use of the both techniques allow to sample and detect a larger number of molecules with specific physicochemical properties to each sampling technique. In conclusion, the Coriolis micro can sample and detect volatile organic compounds present in air. We have shown that the development of alternative sampling methods and the use of non-target analysis are essential for a more comprehensive risk assessment. Moreover, the use of the Coriolis micro allows the detection of emergent molecules around the Thau lagoon.

| S-EPMC9572053 | biostudies-literature

Investigating the effect of alumina shaping on the sorption properties of promising metal-organic frameworks.

Project description:Three promising MOF candidates, UiO-66(Zr), MIL-100(Fe) and MIL-127(Fe) are shaped through granulation with a ρ-alumina binder. Subsequently, changes in the surface characteristics and adsorption performance are evaluated through adsorption microcalorimetry at 303 K with several common probes (N2, CO2, CO, CH4, C2H6, C3H8, C3H6 and C4H10), generating a detailed picture of adsorbate-adsorbent interactions. Vapour adsorption experiments with water and methanol were further used to gauge changes in hydrophobicity caused by the addition of the alumina binder. Upon shaping, a decrease in gravimetric capacity and specific surface area is observed, accompanied by an increased capacity on a volumetric basis, attributed to densification induced by the shaping process, as well as a surprising lack of pore environment changes. However, the magnitude of these effects depends on the MOF, suggesting a high dependence on material structure. Out of the three materials, MIL-127(Fe) shows the least changes in adsorption performance and is highlighted as a promising candidate for further study.

| S-EPMC9061125 | biostudies-literature

Silicone wristbands integrate dermal and inhalation exposures to semi-volatile organic compounds (SVOCs).

Project description:Silicone wristbands are being increasingly used to assess human exposure to semi-volatile organic compounds (SVOCs). However, it is unclear what exposure pathways wristbands integrate. To test the hypothesis that wristbands integrate inhalation and dermal exposures, we measured 38 chemicals from four compound groups (PAHs, PBDEs, nBFRs, and OPEs) in silicone wristbands and brooches, active air samples (Occupational Safety and Health Administration Versatile Sampler or OVS cartridge), and hand wipes from 10 adults during a 72-hour period. Phenanthrene, BDE-47, 2?ethylhexyl 2,3,4,5?tetrabromobenzoate (EHTBB), tris[(2R)?1?chloro?2?propyl] phosphate (TCIPP), and tris(1,3?dichloro?2?propyl) phosphate (TDCIPP) were the predominant compounds in all four matrices. In a linear regression analysis, the compound levels in OVS were positively associated with those in wristbands and brooches for nBFRs and OPEs, but not for PAHs and PBDEs. The compound levels in wristbands were positively associated with those in hand wipes and brooches for all chemicals. The regressions between the levels in wristbands and OVS or brooches combined with the levels in hand wipes showed stronger, supporting the hypothesis that wristbands captured inhalation and dermal exposure pathways.

| S-EPMC6774250 | biostudies-literature

Semi-Volatile Organic Compounds in Car Dust: A Pilot Study in Jeddah, Saudi Arabia.

Project description:People may spend a significant amount of their daily time in cars and thus be exposed to chemicals present in car dust. Various chemicals are emitted from during car use, contaminating the car dust. In this study, we compiled published and unpublished data on the occurrence of phthalates, flame retardants (FRs), polycyclic aromatic hydrocarbons (PAHs), and polychlorinated biphenyls (PCBs) in Saudi car dust. Phthalates, a class of chemical commonly used as plasticizers in different car parts, were the major pollutants found in car dust, with a median value of ∑phthalates 1,279,000 ng/g. Among other chemicals, organophosphate flame retardants (OPFRs) were found to be between 1500-90,500 ng/g, which indicates their use as alternative FRs in the car industry. The daily exposure to Saudi drivers (regular and taxi drivers) was below the respective reference dose (RfD) values of the individual chemicals. However, the estimated incremental lifetime cancer risk (ILCR) values due to chronic exposure to these chemicals was >1 × 10-5 for taxi drivers for phthalates and PAHs, indicating that the long-term exposure to these chemicals is a cause of concern for drivers who spend considerable time in cars. The study has some limitations, due to the small number of samples, lack of updated RfD values, and missing cancer slope factors for many studied chemicals. Despite these limitations, this study indicates the possible range of exposure to drivers from chemicals in car dust and warrants further extensive studies to confirm these patterns.

| S-EPMC8124401 | biostudies-literature

Retrofitting metal-organic frameworks.

Project description:The post-synthetic installation of linker molecules between open-metal sites (OMSs) and undercoordinated metal-nodes in a metal-organic framework (MOF) - retrofitting - has recently been discovered as a powerful tool to manipulate macroscopic properties such as the mechanical robustness and the thermal expansion behavior. So far, the choice of cross linkers (CLs) that are used in retrofitting experiments is based on qualitative considerations. Here, we present a low-cost computational framework that provides experimentalists with a tool for evaluating various CLs for retrofitting a given MOF system with OMSs. After applying our approach to the prototypical system CL@Cu3BTC2 (BTC?=?1,3,5-benzentricarboxylate) the methodology was expanded to NOTT-100 and NOTT-101 MOFs, identifying several promising CLs for future CL@NOTT-100 and CL@NOTT-101 retrofitting experiments. The developed model is easily adaptable to other MOFs with OMSs and is set-up to be used by experimentalists, providing a guideline for the synthesis of new retrofitted MOFs with modified physicochemical properties.

| S-EPMC6820732 | biostudies-literature

Distinguishing Metal-Organic Frameworks.

Project description:We consider two metal-organic frameworks as identical if they share the same bond network respecting the atom types. An algorithm is presented that decides whether two metal-organic frameworks are the same. It is based on distinguishing structures by comparing a set of descriptors that is obtained from the bond network. We demonstrate our algorithm by analyzing the CoRe MOF database of DFT optimized structures with DDEC partial atomic charges using the program package ToposPro.

| S-EPMC5843951 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data