Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency.

ABSTRACT: Today's best perovskite solar cells use a mixture of formamidinium and methylammonium as the monovalent cations. With the addition of inorganic cesium, the resulting triple cation perovskite compositions are thermally more stable, contain less phase impurities and are less sensitive to processing conditions. This enables more reproducible device performances to reach a stabilized power output of 21.1% and ?18% after 250 hours under operational conditions. These properties are key for the industrialization of perovskite photovoltaics.

SUBMITTER: Saliba M

PROVIDER: S-EPMC4936376 | biostudies-literature | 2016 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency.

Saliba Michael M Matsui Taisuke T Seo Ji-Youn JY Domanski Konrad K Correa-Baena Juan-Pablo JP Nazeeruddin Mohammad Khaja MK Zakeeruddin Shaik M SM Tress Wolfgang W Abate Antonio A Hagfeldt Anders A Grätzel Michael M

Energy & environmental science 20160329 6

Today's best perovskite solar cells use a mixture of formamidinium and methylammonium as the monovalent cations. With the addition of inorganic cesium, the resulting triple cation perovskite compositions are thermally more stable, contain less phase impurities and are less sensitive to processing conditions. This enables more reproducible device performances to reach a stabilized power output of 21.1% and ∼18% after 250 hours under operational conditions. These properties are key for the industr ...[more]

PMID: 27478500

Similar Datasets

Engineering fluorinated-cation containing inverted perovskite solar cells with an efficiency of >21% and improved stability towards humidity.

Project description:Efficient and stable perovskite solar cells with a simple active layer are desirable for manufacturing. Three-dimensional perovskite solar cells are most efficient but need to have improved environmental stability. Inclusion of larger ammonium salts has led to a trade-off between improved stability and efficiency, which is attributed to the perovskite films containing a two-dimensional component. Here, we show that addition of 0.3 mole percent of a fluorinated lead salt into the three-dimensional methylammonium lead iodide perovskite enables low temperature fabrication of simple inverted solar cells with a maximum power conversion efficiency of 21.1%. The perovskite layer has no detectable two-dimensional component at salt concentrations of up to 5 mole percent. The high concentration of fluorinated material found at the film-air interface provides greater hydrophobicity, increased size and orientation of the surface perovskite crystals, and unencapsulated devices with increased stability to high humidity.

| S-EPMC7782759 | biostudies-literature

Surface Passivation of Perovskite Solar Cells Toward Improved Efficiency and Stability.

Project description:The advancement of perovskite solar cells (PVSCs) technology toward commercialized promotion needs high efficiency and optimum stability. By introducing a small molecular material such as tetratetracontane (TTC, CH3(CH2)42CH3) at the fullerene (C60)/perovskite interface of planar p-i-n PVSCs, we significantly reduced the interfacial traps, thereby suppressing electron recombination and facilitating electron extraction. Consequently, an improved efficiency of 20.05% was achieved with a high fill factor of 79.4%, which is one of the best performances for small molecular-modified PVSCs. Moreover, the hydrophobic TTC successfully protects the perovskite film from water damage. As a result, we realized a better long-term stability that maintains 87% of the initial efficiency after continuous exposure for 200 h in air.

| S-EPMC7770653 | biostudies-literature

Fully Spray-Coated Triple-Cation Perovskite Solar Cells.

Project description:We use ultrasonic spray-coating to sequentially deposit thin films of tin oxide, a triple-cation perovskite and spiro-OMeTAD, allowing us fabricate perovskite solar cells (PSCs) with a champion reverse scan power conversion efficiency (PCE) of 19.4% on small-area substrates. We show that the use of spray-deposition permits us to rapidly (>80 mm s-1) coat 25 mm × 75 mm substrates that were divided into a series of devices each with an active area of 15.4 mm2, yielding an average PCE of 10.3% and a peak PCE of 16.3%. By connecting seven 15.4 mm2 devices in parallel on a single substrate, we create a device having an effective active area of 1.08 cm2 and a PCE of 12.7%. This work demonstrates the possibility for spray-coating to fabricate high efficiency and low-cost perovskite solar cells at speed.

| S-EPMC7171188 | biostudies-literature

All-inorganic cesium lead iodide perovskite solar cells with stabilized efficiency beyond 15.

Project description:As the black cesium lead iodide (CsPbI3) tends to transit into a yellow ?-phase at ambient, it is imperative to develop a stabilized black phase for photovoltaic applications. Herein, we report a distorted black CsPbI3 film by exploiting the synergistic effect of hydroiodic acid (HI) and phenylethylammonium iodide (PEAI) additives. It is found that the HI induces formation of hydrogen lead iodide (HPbI3+x), an intermediate to the distorted black phase with appropriate band gap of 1.69?eV; while PEAI provides nucleation for optimized crystallization. More importantly, it stabilizes the distorted black phase by hindering phase transition via its steric effects. Upon optimization, we have attained solar cell efficiency as high as 15.07%. Specifically, the bare cell without any encapsulation shows negligible efficiency loss after 300?h of light soaking. The device keeps 92% of its initial cell efficiency after being stored for 2 months under ambient conditions.

| S-EPMC6208436 | biostudies-literature

Enhanced Moisture Stability by Butyldimethylsulfonium Cation in Perovskite Solar Cells.

Project description:Many organic cations in halide perovskites have been studied for their application in perovskite solar cells (PSCs). Most organic cations in PSCs are based on the protic nitrogen cores, which are susceptible to deprotonation. Here, a new candidate of fully alkylated sulfonium cation (butyldimethylsulfonium; BDMS) is designed and successfully assembled into PSCs with the aim of increasing humidity stability. The BDMS-based perovskites retain the structural and optical features of pristine perovskite, which results in the comparable photovoltaic performance. However, the fully alkylated aprotic nature of BDMS shows a much more pronounced effect on the increase in humidity stability, which emphasizes a generic electronic difference between protic ammonium and aprotic sulfonium cation. The current results would pave a new way to explore cations for the development of promising PSCs.

| S-EPMC7001633 | biostudies-literature

NiO <i><sub>x</sub></i> Hole Transport Layer for Perovskite Solar Cells with Improved Stability and Reproducibility.

Project description:In this study, highly stable, low-temperature-processed planar lead halide perovskite (MAPbI3-x Cl x ) solar cells with NiO x interfaces have been developed. Our solar cells maintain over 85% of the initial efficiency for more than 670 h, at the maximum power point tracking (MPPT) under 1 sun illumination (no UV-light filtering) at 30 °C, and over 73% of the initial efficiency for more than 1000 h, at the accelerating aging test (85 °C) under the same MPPT condition. Storing the encapsulated devices at 85 °C in dark over 1000 h revealed no performance degradation. The key factor for the prolonged lifetime of the devices was the sputter-deposited polycrystalline NiO x hole transport layer (HTL). We observed that the properties of NiO x are dependent on its composition. At a higher Ni3+/Ni2+ ratio, the conductivity of NiO x is higher, but at the expense of optical transmittance. We obtained the highest power conversion efficiency of 15.2% at the optimized NiO x condition. The sputtered NiO x films were used to fabricate solar cells without annealing or any other treatments. The device stability enhanced significantly compared to that of the devices with PEDOT:PSS HTL. We clearly demonstrated that the illumination-induced degradation depends heavily on the nature of the HTL in the inverted perovskite solar cells (PVSCs). The sputtered NiO x HTL can be a good candidate to solve stability problems in the lead halide PVSCs.

| S-EPMC6641178 | biostudies-literature

Interfacial Contact Passivation for Efficient and Stable Cesium-Formamidinium Double-Cation Lead Halide Perovskite Solar Cells.

Project description:Perovskite solar cells (PSCs) have achieved extremely high power conversion efficiencies (PCEs) of over 25%, but practical application still requires further improvement in the long-term stability of the device. Herein, we present an in situ interfacial contact passivation strategy to reduce the interfacial defects and extraction losses between the hole transporting layer and perovskite. The existence of PbS promotes the crystallization of perovskite, passivates the interface and grain boundary defects, and reduces the nonradiation recombination, thereby leading to a champion PCE of 21.07% with reduced hysteresis, which is one of the best results for the methylammonium (MA)-free, cesium formamidinium double-cation lead-based PSCs. Moreover, the unencapsulated device retains more than 93% and 82% of its original efficiencies after 1 year's storage under ambient conditions and thermal aging at 85°C for 1,000 h in a nitrogen atmosphere, likely due to the usage of MA-free perovskite and the enhanced surface hydrophobicity.

| S-EPMC6992903 | biostudies-literature

Nanoscale Back Contact Perovskite Solar Cell Design for Improved Tandem Efficiency.

Project description:Tandem photovoltaics, combining absorber layers with two distinct band gap energies into a single device, provide a practical solution to reduce thermalization losses in solar energy conversion. Traditionally, tandem devices have been assembled using two-terminal (2-T) or four-terminal (4-T) configurations; the 2-T limits the tandem performance due to the series connection requiring current matching, while the standard 4-T configuration requires at least three transparent electrical contacts, which reduce the total collected power due to unavoidable parasitic absorption. Here, we introduce a novel architecture based on a nanoscale back-contact for a thin-film top cell in a three terminal (3-T) configuration. Using coupled optical-electrical modeling, we optimize this architecture for a planar perovskite-silicon tandem, highlighting the roles of nanoscale contacts to reduce the required perovskite electronic quality. For example, with an 18% planar silicon base cell, the 3-T back contact design can reach a 32.9% tandem efficiency with a 10 ?m diffusion length perovskite material. Using the same perovskite quality, the 4-T and 2-T configurations only reach 30.2% and 24.8%, respectively. We also confirm that the same 3-T efficiency advantage applies when using 25% efficient textured silicon base cells, where the tandems reach 35.2% and 32.8% efficiency for the 3-T, and 4-T configurations, respectively. Furthermore, because our design is based on the individual subcells being back-contacted, further improvements can be readily made by optimizing the front surface, which is left free for additional antireflective coating, light trapping, surface passivation, and photoluminescence outcoupling enhancements.

| S-EPMC5599876 | biostudies-literature

Organic Ligands Armored ZnO Enhances Efficiency and Stability of CsPbI2Br Perovskite Solar Cells.

Project description:Inorganic perovskite solar cells (PSCs) have witnessed great progress in recent years due to their superior thermal stability. As a representative, CsPbI2Br is attracting considerable attention as it can balance the high efficiency of CsPbI3 and the stability of CsPbBr3. However, most research employs doped charge transport materials or applies bilayer transport layers to obtain decent performance, which vastly complicates the fabrication process and scarcely satisfies the commercial production requirement. In this work, all-layer-doping-free inorganic CsPbI2Br PSCs using organic ligands armored ZnO as the electron transport materials achieve an encouraging performance of 16.84%, which is one of the highest efficiencies among published works. Meanwhile, both the ZnO-based CsPbI2Br film and device show superior photostability under continuous white light-emitting diode illumination and improved thermal stability under 85 °C. The remarkable enhanced performance arises from the favorable organic ligands (acetate ions) residue in the ZnO film, which not only can conduce to maintain high crystallinity of perovskite, but also passivate traps at the interface through cesium/acetate interactions, thus suppressing the photo- and thermal- induced perovskite degradation.

| S-EPMC7610334 | biostudies-literature

Triple-cation perovskite solar cells fabricated by a hybrid PVD/blade coating process using green solvents.

Project description:The scalability of highly efficient organic-inorganic perovskite solar cells (PSCs) is one of the major challenges of solar module manufacturing. Various scalable methods have been explored to strive for uniform perovskite films of high crystal quality on large-area substrates, but each of these methods has individual limitations on the potential of successful commercialization of perovskite photovoltaics. Here, we report a fully scalable hybrid process, which combines vapor- and solution-based techniques to deposit high quality uniform perovskite films on large-area substrates. This two-step process does not use toxic solvents, and it further allows easy implementation of passivation strategies and additives. We fabricate PSCs based on this process and use blade coating to deposit a SnO2 electron transporting layer and Spiro-OMeTAD hole transporting layer without halogenated solvents in ambient air. The fabricated PSCs have achieved open-circuit voltage up to 1.16 V and power conversion efficiency of 18.7% with good uniformity on 5 cm × 5 cm substrates.

| S-EPMC8651003 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data