Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

High power laser-driven ceramic phosphor plate for outstanding efficient white light conversion in application of automotive lighting.

ABSTRACT: We report on Y3Al5O12: Ce(3+) ceramic phosphor plate (CPP) using nano phosphor for high power laser diode (LD) application for white light in automotive lighting. The prepared CPP shows improved luminous properties as a function of Ce(3+) concentration. The luminous properties of the Y3Al5O12: Ce(3+) CPP nano phosphor are improved when compared to the Y3Al5O12: Ce(3+) CPP with bulk phosphor, and hence, the luminous emittance, luminous flux, and conversion efficiency are improved. The Y3Al5O12: Ce(3+) CPP with an optimal Ce(3+) content of 0.5?mol % shows 2733?lm/mm(2) value under high power blue radiant flux density of 19.1?W/mm(2). The results indicate that Y3Al5O12: Ce(3+) CPP using nano phosphor can serve as a potential material for solid-state laser lighting in automotive applications.

SUBMITTER: Song YH

PROVIDER: S-EPMC4977504 | biostudies-literature | 2016 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

High power laser-driven ceramic phosphor plate for outstanding efficient white light conversion in application of automotive lighting.

Song Young Hyun YH Ji Eun Kyung EK Jeong Byung Woo BW Jung Mong Kwon MK Kim Eun Young EY Yoon Dae Ho DH

Scientific reports 20160809

We report on Y3Al5O12: Ce(3+) ceramic phosphor plate (CPP) using nano phosphor for high power laser diode (LD) application for white light in automotive lighting. The prepared CPP shows improved luminous properties as a function of Ce(3+) concentration. The luminous properties of the Y3Al5O12: Ce(3+) CPP nano phosphor are improved when compared to the Y3Al5O12: Ce(3+) CPP with bulk phosphor, and hence, the luminous emittance, luminous flux, and conversion efficiency are improved. The Y3Al5O12: C ...[more]

PMID: 27502730

Similar Datasets

Glass crystallization making red phosphor for high-power warm white lighting.

Project description:Rapid development of solid-state lighting technology requires new materials with highly efficient and stable luminescence, and especially relies on blue light pumped red phosphors for improved light quality. Herein, we discovered an unprecedented red-emitting Mg2Al4Si5O18:Eu2+ composite phosphor (λex = 450 nm, λem = 620 nm) via the crystallization of MgO-Al2O3-SiO2 aluminosilicate glass. Combined experimental measurement and first-principles calculations verify that Eu2+ dopants insert at the vacant channel of Mg2Al4Si5O18 crystal with six-fold coordination responsible for the peculiar red emission. Importantly, the resulting phosphor exhibits high internal/external quantum efficiency of 94.5/70.6%, and stable emission against thermal quenching, which reaches industry production. The maximum luminous flux and luminous efficiency of the constructed laser driven red emitting device reaches as high as 274 lm and 54 lm W-1, respectively. The combinations of extraordinary optical properties coupled with economically favorable and innovative preparation method indicate, that the Mg2Al4Si5O18:Eu2+ composite phosphor will provide a significant step towards the development of high-power solid-state lighting.

| S-EPMC7955133 | biostudies-literature

Laser induced white lighting of graphene foam.

Project description:Laser induced white light emission was observed from porous graphene foam irradiated with a focused continuous wave beam of the infrared laser diode. It was found that the intensity of the emission increases exponentially with increasing laser power density, having a saturation level at ca. 1.5 W and being characterized by stable emission conditions. It was also observed that the white light emission is spatially confined to the focal point dimensions of the illuminating laser light. Several other features of the laser induced white light emission were also discussed. It was observed that the white light emission is highly dependent on the electric field intensity, allowing one to modulate the emission intensity. The electric field intensity ca. 0.5 V/μm was able to decrease the white light intensity by half. Origins of the laser-induced white light emission along with its characteristic features were discussed in terms of avalanche multiphoton ionization, inter-valence charge transfer and possible plasma build-up processes. It is shown that the laser-induced white light emission may be well utilized in new types of white light sources.

| S-EPMC5256029 | biostudies-literature

Project description:In this work we report the white light emission in transparent Cr:YAG ceramic pellet upon irradiation with focused beam of CW infrared laser diode. It was found that this phenomenon is specifically related to interaction of laser beam with a surface of the pellet. The white light was emitted outside an irradiated spot at the surface of the pellet and did not penetrate inside the pellet. Moreover, the red emission related to two-photon absorption along the laser beam penetrating the Cr3+:YAG pellet was observed. Interaction of the laser beam with the surface of the pellet leads to an efficient white light emission from an outer side of the pellet. The resulting white light emission did not entry back the pellet. Multiphoton ionization leading to intervalence charge transfer followed by light emission was proposed as the mechanism of experimentally observed white light emission.

| S-EPMC8263758 | biostudies-literature

Non-resonant power-efficient directional Nd:YAG ceramic laser using a scattering cavity.

Project description:Non-resonant lasers exhibit the potential for stable and consistent narrowband light sources. Furthermore, non-resonant lasers do not require well-defined optics, and thus has considerably diversified the available types of laser gain materials including powders, films, and turbid ceramics. Despite these intrinsic advantages, the practical applications of non-resonant lasers have been limited so far, mainly because of their low power efficiency and omnidirectional emission. To overcome these limitations, here we propose a light trap design for non-resonant lasers based on a spherical scattering cavity with a small entrance. Using a porous Nd3+:YAG ceramic, directional laser emission could be observed with significant enhancements in the slope efficiency and linewidth (down to 32 pm). A theoretical model is also developed to describe and predict the operation characteristics of proposed non-resonant laser.

| S-EPMC7782720 | biostudies-literature

Multifunctional Device based on phosphor-piezoelectric PZT: lighting, speaking, and mechanical energy harvesting.

Project description:We demonstrated the tri-functional device based on all powder-processing methods by using ZnS powder as phosphor layer and piezoelectric material as dielectric layer. The fabricated device generated the electroluminescent (EL) light from phosphor and the sound from piezoelectric sheet under a supply of external electric power, and additionally harvested the reverse-piezoelectric energy to be converted into EL light. Under sinusoidal applied voltage, EL luminances were exponentially increased with a maximum luminous efficiency of 1.3 lm/W at 40 V and 1,000 Hz, and sound pressure levels (SPLs) were linearly increased. The EL luminances were linearly dependent on applied frequency while the SPLs showed the parabolic increase behavior below 1,000 Hz and then the flat response. The temperature dependence on EL luminances and SPLs was demonstrated; the former was drastically increased and the latter was slightly decreased with the increase of temperature. Finally, as an energy harvesting application, the piezoelectric-induced electroluminescence effect was demonstrated by applying only mechanical pressure to the device without any external electric power.

| S-EPMC5762879 | biostudies-literature

Ceramic Laser Materials.

Project description:Ceramic laser materials have come a long way since the first demonstration of lasing in 1964. Improvements in powder synthesis and ceramic sintering as well as novel ideas have led to notable achievements. These include the first Nd:yttrium aluminum garnet (YAG) ceramic laser in 1995, breaking the 1 KW mark in 2002 and then the remarkable demonstration of more than 100 KW output power from a YAG ceramic laser system in 2009. Additional developments have included highly doped microchip lasers, ultrashort pulse lasers, novel materials such as sesquioxides, fluoride ceramic lasers, selenide ceramic lasers in the 2 to 3 μm region, composite ceramic lasers for better thermal management, and single crystal lasers derived from polycrystalline ceramics. This paper highlights some of these notable achievements.

| S-EPMC5448906 | biostudies-other

Pyrophosphate Phosphor Solid Solution with High Quantum Efficiency and Thermal Stability for Efficient LED Lighting.

Project description:Phosphors with high quantum efficiency and thermal stability are greatly desired for lighting industries. Based on the design strategy of solid solution, a series of deep-blue-emitting phosphors (Sr0.99-xBax)2P2O7:0.02Eu2+ (SBxPE x = 0-0.5) are developed. Upon excitation at 350 nm, the optimized SB0.3PE phosphor shows a relatively narrow full width at half maximum (FWHM = 32.7 nm) peaking at 420 nm, which matches well with the plant absorption in blue region. Moreover, this phosphor exhibits obvious enhancement of internal quantum efficiency (IQE) (from 74% to 100%) and thermal stability (from 88% to 108% of peak intensity and from 99% to 124% of integrated area intensity at 150°C) compared with the pristine one. The white LED devices using SB0.3PE as deep-blue-emitting component show good electronic properties, indicating that SB0.3PE is promising to be used in plant growth lighting, white LEDs, and other photoelectric applications.

| S-EPMC7049664 | biostudies-literature

Hexagonal GaN nanorod-based photonic crystal slab as simultaneous yellow broadband reflector and blue emitter for phosphor-conversion white light emitting devices.

Project description:We report a hexagonal GaN nanorod-based two-dimensional photonic crystal (PhC) slab for phosphor-conversion white light emitting devices analyzed by three-dimensional finite-difference time-domain simulation; this slab has a broad reflection band at yellow wavelength with low Fabry-Pérot background at normal incidence. For practical use as a wavelength-selective reflector, a buffer layer under the PhC slab is employed to sustain the nanorods in the PhC slab. However, we observed that the buffer layer placed below the slab destroys the broad reflection band due to evanescent coupling of electromagnetic field in the slab and the buffer layer. By introducing small-sized base pillars between the slab and the buffer layer, we could decouple the interaction between the slab and the buffer layer and maintain the broad reflection band without any unexpected dips. Since this GaN nanorod-based PhC slab is designed for practical light emitting devices by considering dielectric and transparent conducting layers, this structure is directly applicable for developing hybrid white light emitting devices having both an (active) blue-color-emitting nanorod emitters and a (passive) normal reflector of phosphor emission.

| S-EPMC6962447 | biostudies-literature

Laser phase plate for transmission electron microscopy.

Project description:Transmission electron microscopy (TEM) of rapidly frozen biological specimens, or cryo-EM, would benefit from the development of a phase plate for in-focus phase contrast imaging. Several types of phase plates have been investigated, but rapid electrostatic charging of all such devices has hindered these efforts. Here, we demonstrate electron phase manipulation with a high-intensity continuous-wave laser beam, and use it as a phase plate for TEM. We demonstrate the laser phase plate by imaging an amorphous carbon film. The laser phase plate provides a stable and tunable phase shift without electrostatic charging or unwanted electron scattering. These results suggest the possibility for dose-efficient imaging of unstained biological macromolecules and cells.

| S-EPMC6768090 | biostudies-literature

Low-Yellowing Phosphor-in-Glass for High-Power Chip-on-board White LEDs by Optimizing a Low-Melting Sn-P-F-O Glass Matrix.

Project description:We introduce a low-melting-point (MP) Sn-P-F-O glass ceramic material into the phosphor-in-glass (PIG) material to realize an 'on-chip' chip-on-board (COB) type of phosphor-converted (pc) white light-emitting diode (WLED) with green (BaSr)2SiO4:Eu2+ and red (SrCa)AlSiN3:Eu2+ (SCASN) phosphors. The optimum Sn-P-F-O-based ceramic components can be sintered into the glass phase with a facile one-step heating process at 285 °C for 1 min. Specifically, these soft-fabrication conditions can be optimized to minimize the degradation of the luminescent properties of the red SCASN phosphor as well as the green silicate phosphor in PIG-based white COB-type pc-LEDs owing to the low thermal loss of the phosphors at low fabrication temperatures below 300 °C. Moreover, the constituents of the COB package, in this case the wire bonding and plastic exterior, can be preserved simultaneously from thermal damage. That is, the low sintering temperature of the glass ceramic encapsulant is a very important factor to realize excellent optical qualities of white COB LEDs. The optical performances of low-MP Sn-P-F-O-based PIG on-chip COB-type pc-WLEDs exhibit low yellowing phenomena, good luminous efficacy of 70.9-86.0 lm/W, excellent color rendering index of 94-97 with correlated color temperatures from 2700 to 10000 K, and good long-term stability.

| S-EPMC5943285 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data