Dataset Information

Visualization and analysis of biomaterial-centered thrombus formation within a defined crevice under flow.

ABSTRACT: The blood flow pathway within a device, together with the biomaterial surfaces and status of the patient's blood, are well-recognized factors in the development of thrombotic deposition and subsequent embolization. Blood flow patterns are of particular concern for devices such as blood pumps (i.e. ventricular assist devices, VADs) where shearing forces can be high, volumes are relatively large, and the flow fields can be complex. However, few studies have examined the effect of geometric irregularities on thrombus formation on clinically relevant opaque materials under flow. The objective of this study was to quantify human platelet deposition onto Ti6Al4V alloys, as well as positive and negative control surfaces, in the region of defined crevices (?50-150 ?m in width) that might be encountered in many VADs or other cardiovascular devices. To achieve this, reconstituted fresh human blood with hemoglobin-depleted red blood cells (to achieve optical clarity while maintaining relevant rheology), long working optics, and a custom designed parallel plate flow chamber were employed. The results showed that the least amount of platelet deposition occurred in the largest crevice size examined, which was counterintuitive. The greatest levels of deposition occurred in the 90 ?m and 53 ?m crevices at the lower wall shear rate. The results suggest that while crevices may be unavoidable in device manufacturing, the crevice size might be tailored, depending on the flow conditions, to reduce the risk of thromboembolic events. Further, these data might be used to improve the accuracy of predictive models of thrombotic deposition in cardiovascular devices to help optimize the blood flow path and reduce device thrombogenicity.

SUBMITTER: Jamiolkowski MA

PROVIDER: S-EPMC4982661 | biostudies-literature | 2016 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Visualization and analysis of biomaterial-centered thrombus formation within a defined crevice under flow.

Jamiolkowski Megan A MA Pedersen Drake D DD Wu Wei-Tao WT Antaki James F JF Wagner William R WR

Biomaterials 20160426

The blood flow pathway within a device, together with the biomaterial surfaces and status of the patient's blood, are well-recognized factors in the development of thrombotic deposition and subsequent embolization. Blood flow patterns are of particular concern for devices such as blood pumps (i.e. ventricular assist devices, VADs) where shearing forces can be high, volumes are relatively large, and the flow fields can be complex. However, few studies have examined the effect of geometric irregul ...[more]

PMID: 27156141

Similar Datasets

Project description:A comprehensive understanding of thrombus formation as a physicochemical process that has evolved to protect the integrity of the human vasculature is critical to our ability to predict and control pathological states caused by a malfunctioning blood coagulation system. Despite numerous investigations, the spatial and temporal details of thrombus growth as a multicomponent process are not fully understood. Here, we used computational modeling to investigate the temporal changes in the spatial distributions of the key enzymatic (i.e., thrombin) and structural (i.e., platelets and fibrin) components within a growing thrombus. Moreover, we investigated the interplay between clot structure and its mechanical properties, such as hydraulic resistance to flow. Our model relied on the coupling of computational fluid dynamics and biochemical kinetics, and was validated using flow-chamber data from a previous experimental study. The model allowed us to identify the distinct patterns characterizing the spatial distributions of thrombin, platelets, and fibrin accumulating within a thrombus. Our modeling results suggested that under the simulated conditions, thrombin kinetics was determined predominantly by prothrombinase. Furthermore, our simulations showed that thrombus resistance imparted by fibrin was ∼30-fold higher than that imparted by platelets. Yet, thrombus-mediated bloodflow occlusion was driven primarily by the platelet deposition process, because the height of the platelet accumulation domain was approximately twice that of the fibrin accumulation domain. Fibrinogen supplementation in normal blood resulted in a nonlinear increase in thrombus resistance, and for a supplemented fibrinogen level of 48%, the thrombus resistance increased by ∼2.7-fold. Finally, our model predicted that restoring the normal levels of clotting factors II, IX, and X while simultaneously restoring fibrinogen (to 88% of its normal level) in diluted blood can restore fibrin generation to ∼78% of its normal level and hence improve clot formation under dilution.

Project description:Essentials Biological activity of human neutrophil peptide (HNP)-1 in hemostasis under physiological conditions is not fully understood. HNP-1 inhibits the adhesion/aggregation of murine platelets on a fibrillar collagen surface or an activated endothelial cell surface under flow. The anti-adhesion activity appears to depend on the terminal free thiols of HNP-1, which may inhibit VWF-VWF lateral associations. Our results suggest a protective role and potential novel therapeutic use of HNP-1 for arterial thrombosis. SUMMARY: Background Human neutrophil peptides (HNPs), also known as α-defensins, are released from degranulated neutrophils and play an important role in innate immunity. However, their biological roles in hemostasis under flow are not fully explored. Objective This study aims to determine the role of HNP-1 on platelet adhesion and aggregation on a collagen surface or ultra large von Willebrand factor (ULVWF) on endothelium under flow and elucidate the structural elements required for its activity. Methods Anticoagulated whole blood from wild-type or Adamts13-/- mice was incubated with a fluorescein-conjugated anti-human CD41 in the presence of increasing concentrations of a synthetic HNP-1 and perfused over a collagen surface or a tumor necrosis factor (TNF)-α activated murine endothelial cell surface under arterial flow. The rate of accumulation and the final surface coverage of fluoresceinated murine platelets or the rate of forming platelet-decorated ULVWF strings were determined using the BioFlux microfluidic system. Results HNP-1 inhibited the rate and final coverage of fluorescein-labeled murine platelets on a fibrillar collagen surface under flow (100 dyne/cm2 ) in a concentration-dependent manner and the anti-adhesive activity of HNP-1 depended on its terminal free cysteine thiols. HNP-1 (20 μM) also dramatically inhibited the formation of platelets-decorated ULVWF strings on TNF-α activated murine endothelial surface under arterial flow. Conclusions Our results demonstrate for the first time an antiplatelet adhesion or antithrombotic activity of HNP-1; this activity depends on its terminal free thiols, likely affecting VWF-VWF lateral associations. These findings may suggest a potential novel therapeutic strategy for arterial thrombosis.

Project description:The reaction dynamics of a complex mixture of cells and proteins, such as blood, in branched circulatory networks within the human microvasculature or extravascular therapeutic devices such as extracorporeal oxygenation machine (ECMO) remains ill-defined. In this report we utilize a multi-bypass microfluidics ladder network design with dimensions mimicking venules to study patterns of blood platelet aggregation and fibrin formation under complex shear. Complex blood fluid dynamics within multi-bypass networks under flow were modeled using COMSOL. Red blood cells and platelets were assumed to be non-interacting spherical particles transported by the bulk fluid flow, and convection of the activated coagulation factor II, thrombin, was assumed to be governed by mass transfer. This model served as the basis for predicting formation of local shear rate gradients, stagnation points and recirculation zones as dictated by the bypass geometry. Based on the insights from these models, we were able to predict the patterns of blood clot formation at specific locations in the device. Our experimental data was then used to adjust the model to account for the dynamical presence of thrombus formation in the biorheology of blood flow. The model predictions were then compared to results from experiments using recalcified whole human blood. Microfluidic devices were coated with the extracellular matrix protein, fibrillar collagen, and the initiator of the extrinsic pathway of coagulation, tissue factor. Blood was perfused through the devices at a flow rate of 2 µL/min, translating to physiologically relevant initial shear rates of 300 and 700 s-1 for main channels and bypasses, respectively. Using fluorescent and light microscopy, we observed distinct flow and thrombus formation patterns near channel intersections at bypass points, within recirculation zones and at stagnation points. Findings from this proof-of-principle ladder network model suggest a specific correlation between microvascular geometry and thrombus formation dynamics under shear. This model holds potential for use as an integrative approach to identify regions susceptible to intravascular thrombus formation within the microvasculature as well as extravascular devices such as ECMO.

Dataset Information

Visualization and analysis of biomaterial-centered thrombus formation within a defined crevice under flow.

Publications

Visualization and analysis of biomaterial-centered thrombus formation within a defined crevice under flow.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure