Dataset Information

National Survey of Workplaces Handling and Manufacturing Nanomaterials, Exposure to and Health Effects of Nanomaterials, and Evaluation of Nanomaterial Safety Data Sheets.

ABSTRACT: A national survey on workplace environment nanomaterial handling and manufacturing was conducted in 2014. Workplaces relevant to nanomaterials were in the order of TiO2 (91), SiO2 (88), carbon black (84), Ag (35), Al2O3 (35), ZnO (34), Pb (33), and CeO2 (31). The survey results indicated that the number of workplaces handling or manufacturing nanomaterials was 340 (0.27% of total 126,846) workplaces. The number of nanomaterials used and products was 546 (1.60 per company) and 583 (1.71 per company), respectively. For most workplaces, the results on exposure to hazardous particulate materials, including nanomaterials, were below current OELs, yet a few workplaces were above the action level. As regards the health status of workers, 9 workers were diagnosed with a suspected respiratory occupational disease, where 7 were recommended for regular follow-up health monitoring. 125 safety data sheets (SDSs) were collected from the nanomaterial-relevant workplaces and evaluated for their completeness and reliability. Only 4 CNT SDSs (3.2%) included the term nanomaterial, while most nanomaterial SDSs were not regularly updated and lacked hazard information. When taken together, the current analysis provides valuable national-level information on the exposure and health status of workers that can guide the next policy steps for nanomaterial management in the workplace.

SUBMITTER: Kim J

PROVIDER: S-EPMC4983336 | biostudies-literature | 2016

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

National Survey of Workplaces Handling and Manufacturing Nanomaterials, Exposure to and Health Effects of Nanomaterials, and Evaluation of Nanomaterial Safety Data Sheets.

Kim Jeongho J Yu Il Je IJ

BioMed research international 20160731

A national survey on workplace environment nanomaterial handling and manufacturing was conducted in 2014. Workplaces relevant to nanomaterials were in the order of TiO2 (91), SiO2 (88), carbon black (84), Ag (35), Al2O3 (35), ZnO (34), Pb (33), and CeO2 (31). The survey results indicated that the number of workplaces handling or manufacturing nanomaterials was 340 (0.27% of total 126,846) workplaces. The number of nanomaterials used and products was 546 (1.60 per company) and 583 (1.71 per compa ...[more]

PMID: 27556041

Similar Datasets

Project description:In collaboration with RTI International, the U.S. National Institute for Occupational Safety and Health (NIOSH) administered a survey to North American companies working with nanomaterials to assess health and safety practices. The results would contribute to understanding the impact of the efforts made by the NIOSH Nanotechnology Research Center (NTRC) in communicating occupational health and safety (OHS) considerations for workers when handling these materials. The survey, developed by RAND Corporation, was conducted online from September 2019-December 2019. Forty-five companies or organizations in the U.S. and Canada that fabricate, manufacture, handle, dispose, or otherwise use nanomaterials completed the survey. The survey was designed to answer research questions regarding the nanomaterials in use, which resources the companies have consulted for OHS guidance, and the overall OHS culture at the companies. Other questions specifically addressed whether the companies interacted with NIOSH or NIOSH resources to inform OHS policies and practices. Among participating companies, 57.8% had a maximum of 50 employees. Gold nanoparticles and polymers were most common (n = 20; 45.5% each), followed by graphene (36.4%), carbon nanotubes and nanofibers (34.1%), and zinc oxide nanoparticles (31.8%). Environmental monitoring was performed by 31.8% of the companies. While 88.9% of the companies had laminar flow cabinets, only 67.5% required it to be used with ENMs. Information and training programs were indicated by 90% of the sample, and only 29.6% performed specific health surveillance for ENM workers. Personal protective equipment primarily included gloves (100%) and eye/face protection (97.7%). More than a third (37.8%) of the respondents reported using at least one NIOSH resource to acquire information about safe handling of ENMs. The small number of companies that responded to and completed the survey is a considerable limitation to this study. However, the survey data are valuable for gauging the reach and influence of the NIOSH NTRC on nano OHS and for informing future outreach, particularly to small businesses.

Project description:BackgroundThe NanoSafety Cluster, a cluster of projects funded by the European Commision, identified the need for a computational infrastructure for toxicological data management of engineered nanomaterials (ENMs). Ontologies, open standards, and interoperable designs were envisioned to empower a harmonized approach to European research in nanotechnology. This setting provides a number of opportunities and challenges in the representation of nanomaterials data and the integration of ENM information originating from diverse systems. Within this cluster, eNanoMapper works towards supporting the collaborative safety assessment for ENMs by creating a modular and extensible infrastructure for data sharing, data analysis, and building computational toxicology models for ENMs.ResultsThe eNanoMapper database solution builds on the previous experience of the consortium partners in supporting diverse data through flexible data storage, open source components and web services. We have recently described the design of the eNanoMapper prototype database along with a summary of challenges in the representation of ENM data and an extensive review of existing nano-related data models, databases, and nanomaterials-related entries in chemical and toxicogenomic databases. This paper continues with a focus on the database functionality exposed through its application programming interface (API), and its use in visualisation and modelling. Considering the preferred community practice of using spreadsheet templates, we developed a configurable spreadsheet parser facilitating user friendly data preparation and data upload. We further present a web application able to retrieve the experimental data via the API and analyze it with multiple data preprocessing and machine learning algorithms.ConclusionWe demonstrate how the eNanoMapper database is used to import and publish online ENM and assay data from several data sources, how the "representational state transfer" (REST) API enables building user friendly interfaces and graphical summaries of the data, and how these resources facilitate the modelling of reproducible quantitative structure-activity relationships for nanomaterials (NanoQSAR).

Dataset Information

National Survey of Workplaces Handling and Manufacturing Nanomaterials, Exposure to and Health Effects of Nanomaterials, and Evaluation of Nanomaterial Safety Data Sheets.

Publications

National Survey of Workplaces Handling and Manufacturing Nanomaterials, Exposure to and Health Effects of Nanomaterials, and Evaluation of Nanomaterial Safety Data Sheets.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets