Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Evaluation of RFID Tags to Permanently Mark Trees in Natural Populations.

ABSTRACT: Long-term ecological and genetic studies in natural populations of tree species require marking techniques so that individuals can be re-visited over time, even in difficult terrain. Both GPS coordinates and physical labels have disadvantages that can make re-finding trees difficult. We tested passive and semi-active radio frequency identification (RFID) tags and readers as a means to relocate individual trees. Passive RFID tags do not provide a good solution because of low transmission power of hand-held readers and strong directionality. Semi-active RFID tags provide detection over longer distances, but also suffer from strong directionality. Active RFID tags promise an improvement over semi-passive tags, and could be evaluated in a future study. We conclude that RFID technology has the potential to improve the ability of researchers to locate individual trees repeatedly under natural conditions, and can be used in conjunction with other marking techniques such as physical tags and GPS coordinates.

SUBMITTER: Marczewski T

PROVIDER: S-EPMC5006006 | biostudies-literature | 2016

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Evaluation of RFID Tags to Permanently Mark Trees in Natural Populations.

Marczewski Tobias T Ma Yongpeng Y Sun Weibang W

Frontiers in plant science 20160831

Long-term ecological and genetic studies in natural populations of tree species require marking techniques so that individuals can be re-visited over time, even in difficult terrain. Both GPS coordinates and physical labels have disadvantages that can make re-finding trees difficult. We tested passive and semi-active radio frequency identification (RFID) tags and readers as a means to relocate individual trees. Passive RFID tags do not provide a good solution because of low transmission power of ...[more]

PMID: 27630662

Similar Datasets

Printed, flexible, compact UHF-RFID sensor tags enabled by hybrid electronics.

Project description:Sensor data can be wirelessly transmitted from simple, battery-less tags using Radio Frequency Identification (RFID). RFID sensor tags consist of an antenna, a radio frequency integrated circuit chip (RFIC), and at least one sensor. An ideal tag can communicate over a long distance and be seamlessly integrated onto everyday objects. However, miniaturized antenna designs often have lower performance. Here we demonstrate compact, flexible sensor tags with read range comparable to that of conventional rigid tags. We compare fabrication techniques for flexible antennas and demonstrate that screen and stencil printing are both suitable for fabricating antennas; these different techniques are most useful at different points in the design cycle. We characterize two versions of flexible, screen printed folded dipoles and a meandered monopole operating in the 915 MHz band. Finally, we use these antennas to create passive sensor tags and demonstrate over the air communication of sensor data. These tags could be used to form a network of printed, flexible, passive, interactive sensor tags.

| S-EPMC7538943 | biostudies-literature

Marking through molts: An evaluation of visible implant elastomer to permanently mark individuals in a lower termite species.

Project description:Advances in individual marking methods have facilitated detailed studies of animal populations and behavior as they allow tracking of individuals through time and space. Hemimetabolous insects, representing a wide range of commonly used model organisms, present a unique challenge to individual marking as they are not only generally small-bodied, but also molt throughout development, meaning that traditional surface marks are not persistent.Visible implant elastomer (VIE) offers a potential solution as small amounts of the inert polymer can be implanted under the skin or cuticle of an animal. VIE has proved useful for individually marking fish, crustaceans, and amphibians in both field and laboratory studies and has recently been successfully trialed in laboratory populations of worms and fly larvae. We trialed VIE in the single-piece nesting termite Zootermopsis angusticollis, a small hemimetabolous insect.We found that there was no effect of VIE on survival and that marks persisted following molting. However, we found some evidence that marked termites performed less allogrooming and trophallaxis than controls, although effect sizes were very small.Our study suggests that VIE is an effective technique for marking small hemimetabolous insects like termites but we advocate that caution is applied, particularly when behavioral observation is important.

| S-EPMC8462160 | biostudies-literature

Printable Stretchable Silver Ink and Application to Printed RFID Tags for Wearable Electronics.

Project description:A printable elastic silver ink has been developed, which was made of silver flakes, dispersant, and a fluorine rubber and could be sintered at a low temperature. The printed elastic conductors showed low resistivity at 21 ??·cm, which is about 13.2 times of bulk silver (1.59 ??·cm). Their mechanical properties were investigated by bending, stretching, and cyclic endurance tests. It was found that upon stretching the resistance of printed conductors increased due to deformation and small cracks appeared in the conductor, but was almost reversible when the strain was removed, and the recovery of conductivity was found to be time dependent. Radio-frequency identification (RFID) tags were fabricated by screen printing the stretchable silver ink on a stretchable fabric (lycra). High performance of tag was maintained even with 1000 cycles of stretching. As a practical example of wearable electronics, an RFID tag was printed directly onto a T-shirt, which demonstrated its normal working order in a wearing state.

| S-EPMC6766277 | biostudies-literature

The e-RFIDuino: An Arduino-based RFID environmental station to monitor mobile tags.

Project description:We present a datalogger based on Arduino cards and commercially available tools for radio frequency identification, which we term the e-RFIDuino. Designed to be robut, easy to build and install, it detects and records the mobility of objects tagged with active transponders emitting in the ultra-high frequency domain (433.5 MHz). It functions without connection to the power supply network and is adapted to harsh outdoor environments. Once installed in the field and its on-site sensing field is determined, the data collected (timestamp of detection, transponder identification number, and received signal strength indication) allow estimation of the virtual velocity of tracer passage and investigation of displacement patterns at the scale of the area of detection. Experimental tests showed the device to have very high effectiveness when used to monitor the passage of sediment tracers in a torrential river system during various flood events over several months. The total cost to construct this open source device is below 850 Euros, and it is easily customizable. In the future, it could be equipped with a system for data transmission over the mobile telephone network to reduce the field effort and time required to obtain data, and to provide real-time triggering of field acquisitions at the most appropriate times.

| S-EPMC9123422 | biostudies-literature

Will natural resistance result in populations of ash trees remaining in British woodlands after a century of ash dieback disease?

Project description:Novel pests and diseases are becoming increasingly common, and often cause additional mortality to host species in the newly contacted communities. This can alter the structure of the community up to, and including, the extinction of host species. In the last 20 years, ash dieback (ADB) disease has spread into Europe from East Asia. It has caused substantial mortality in ash tree (Fraxinus excelsior L.) populations. However, a proportion of the individuals in most populations appear to be less susceptible to ADB and resistance seems to have high heritability. These observations have led to suggestions that ash populations may be sustainable after the disease. In order to test this hypothesis, I modified an existing model of UK woodland (parametrized for Wytham Woods, Oxfordshire) to take into account the impact of ADB and allowed offspring to inherit resistance traits from their parent. The results suggest that ash populations would still exist in 100 years, but at lower levels than they are currently. For example, when the initial proportion of resistant individuals is about 10% and heritability of resistance is 0.5, then the population of ash falls to about one-third of present levels. The proportion of individuals initially resistant to ADB had a larger effect on population size after 100 years than the heritability of resistance. The fact that the initial size of the resistant population is important to achieve a high population size in the presence of ADB suggests that a selective breeding programme with the intention of augmenting the natural ash populations would be beneficial.

| S-EPMC6731731 | biostudies-literature

Tracking Baltic hypoxia and cod migration over millennia with natural tags.

Project description:Growing hypoxic and anoxic areas in coastal environments reduce fish habitat, but the interactions and impact on fish in these areas are poorly understood. Using "natural tag" properties of otoliths, we found significant correlations between the extent of Baltic Sea hypoxia and Mn/Ca ratios in regions of cod (Gadus morhua) otoliths corresponding to year 1 of life; this is associated with elevated bottom water dissolved manganese that increases with hypoxia. Elevated Mn/Ca ratios were also found in other years of life but with less frequency. We propose that cod exhibiting enhanced Mn/Ca ratios were exposed to dissolved manganese from hypoxia-induced redox dynamics in nursery areas. Neolithic (4500 B.P.) cod otoliths (n = 12) had low levels of Mn/Ca ratios, consistent with low hypoxia, but a single otolith dated to the younger Iron Age had a distinct growth band with an elevated Mn/Ca ratio. Sr/Ca patterns reflecting changes in environmental salinity and temperature were similar in both modern and Stone Age otoliths, indicating consistent migration habits across time, and Ba/Sr ratios in modern cod otoliths indicate increasing use of a more saline habitat with age. Using elemental ratios, numerous existing archival collections of otoliths could provide the means to reconstruct hypoxia exposure histories and major patterns of fish movement near "dead zones" globally.

| S-EPMC3107296 | biostudies-other

Eomesodermin and T-bet mark developmentally distinct human natural killer cells.

Project description:Immaturity of the immune system of human fetuses and neonates is often invoked to explain their increased susceptibility to infection; however, the development of the fetal innate immune system in early life remains incompletely explored. We now show that the most mature NK cells found in adult (or postnatal) human circulation (CD94-CD16+) are absent during ontogeny. Human fetal NK cells were found to express the 2 signature T-box transcription factors essential for the development of all murine NK and NK-like cells, eomesodermin (Eomes) and T-bet. The single-cell pattern of Eomes and T-bet expression during ontogeny, however, revealed a stereotyped pattern of reciprocal dominance, with immature NK cells expressing higher amounts of Eomes and more mature NK cells marked by greater abundance of T-bet. We also observed a stereotyped pattern of tissue-specific NK cell maturation during human ontogeny, with fetal liver being more restrictive to NK cell maturity than fetal bone barrow, spleen, or lung. These results support the hypothesis that maturation of human NK cells has a discrete restriction until postnatal life, and provide a framework to better understand the increased susceptibility of fetuses and newborns to infection.

| S-EPMC5333970 | biostudies-literature

Large trees are surrounded by more heterospecific neighboring trees in Korean pine broad-leaved natural forests.

Project description:Negative conspecific density dependence is one of the principal mechanisms affecting plant performance and community spatial patterns. Although many studies identified the prevalence of density dependent effects in various vegetation types by analyzing conspecific spatial dispersal patterns (spatial patterning) of forest trees, interactions between individuals and heterospecific neighboring trees caused by density-dependent effects are often neglected. The effects of negative density dependence lead us to expect that neighbourhood species segregation would increase with increasing tree size and that larger trees would be surrounded by more heterospecific neighbours than would smaller trees. We studied four mapped 1-Ha plots on Changbaishan Mountain in North-eastern China and used marked point pattern analysis to explore whether trees of different sizes exhibited differences in neighbourhood species segregation; we also determined whether larger trees were more likely to have heterospecific neighbours than smaller trees were. Our results show that bigger trees generally have higher species mingling levels. Neighborhood species segregation ranged from lower than expected levels to random or nearly random patterns at small scales as tree size classes increased under heterogeneous Poisson null model tests. This study provides some evidence in support of negative density dependent effects in temperate forests.

| S-EPMC6002480 | biostudies-literature

An architectural understanding of natural sway frequencies in trees.

Project description:The relationship between form and function in trees is the subject of a longstanding debate in forest ecology and provides the basis for theories concerning forest ecosystem structure and metabolism. Trees interact with the wind in a dynamic manner and exhibit natural sway frequencies and damping processes that are important in understanding wind damage. Tree-wind dynamics are related to tree architecture, but this relationship is not well understood. We present a comprehensive view of natural sway frequencies in trees by compiling a dataset of field measurement spanning conifers and broadleaves, tropical and temperate forests. The field data show that a cantilever beam approximation adequately predicts the fundamental frequency of conifers, but not that of broadleaf trees. We also use structurally detailed tree dynamics simulations to test fundamental assumptions underpinning models of natural frequencies in trees. We model the dynamic properties of greater than 1000 trees using a finite-element approach based on accurate three-dimensional model trees derived from terrestrial laser scanning data. We show that (1) residual variation, the variation not explained by the cantilever beam approximation, in fundamental frequencies of broadleaf trees is driven by their architecture; (2) slender trees behave like a simple pendulum, with a single natural frequency dominating their motion, which makes them vulnerable to wind damage and (3) the presence of leaves decreases both the fundamental frequency and the damping ratio. These findings demonstrate the value of new three-dimensional measurements for understanding wind impacts on trees and suggest new directions for improving our understanding of tree dynamics from conifer plantations to natural forests.

| S-EPMC6597771 | biostudies-literature

Using spatial mark-recapture for conservation monitoring of grizzly bear populations in Alberta.

Project description:One of the challenges in conservation is determining patterns and responses in population density and distribution as it relates to habitat and changes in anthropogenic activities. We applied spatially explicit capture recapture (SECR) methods, combined with density surface modelling from five grizzly bear (Ursus arctos) management areas (BMAs) in Alberta, Canada, to assess SECR methods and to explore factors influencing bear distribution. Here we used models of grizzly bear habitat and mortality risk to test local density associations using density surface modelling. Results demonstrated BMA-specific factors influenced density, as well as the effects of habitat and topography on detections and movements of bears. Estimates from SECR were similar to those from closed population models and telemetry data, but with similar or higher levels of precision. Habitat was most associated with areas of higher bear density in the north, whereas mortality risk was most associated (negatively) with density of bears in the south. Comparisons of the distribution of mortality risk and habitat revealed differences by BMA that in turn influenced local abundance of bears. Combining SECR methods with density surface modelling increases the resolution of mark-recapture methods by directly inferring the effect of spatial factors on regulating local densities of animals.

| S-EPMC5980105 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data