Dataset Information

A biomechanical comparison study of a modern fibular nail and distal fibular locking plate in AO/OTA 44C2 ankle fractures.

ABSTRACT: A lateral approach with open reduction and internal fixation with a plate is a very effective technique for the majority of distal fibular fractures. However, this open approach for ankle fixation may be complicated by wound dehiscence and infection, especially in high-risk patients. An alternative to plating is an intramedullary implant, which allows maintenance of length, alignment, and rotation and which allows for decreased soft tissue dissection. While there has been clinical data suggesting favorable short-term outcomes with these implants, there is no current biomechanical literature investigating this technology in this particular fracture pattern. This study sought to biomechanically compare an emerging technology with an established method of fixation for distal fibular fractures that traditionally require an extensive exposure.Ten matched cadaveric pairs from the proximal tibia to the foot were prepared to simulate an Arbeitsgemeinschaft für Osteosynthesefragen/Orthopaedic Trauma Association (AO/OTA) 44C2 ankle fracture and randomized to fixation with a distal fibular locking plate or intramedullary fibular rod. A constant 700-N axial load was applied, and all specimens underwent testing for external rotation stiffness, external rotation cyclic loading, and torque to failure. The syndesmotic diastasis, stiffness, torque to failure, angle at failure, and mode of failure were obtained from each specimen.There was no significant difference in syndesmotic diastasis during cyclic loading or at maximal external rotation between the rod and plate groups. Post-cycle external rotation stiffness across the syndesmosis was significantly higher for the locking plate than the fibular rod. There was no significant difference between the rod and plate in torque at failure or external rotation angle. The majority of specimens had failure at the syndesmotic screw.In the present cadaveric study of an AO/OTA 44C2 ankle fracture, a modern fibular rod demonstrated less external rotation stiffness while maintaining the syndesmotic diastasis to within acceptable tolerances and having similar failure characteristics.

SUBMITTER: Switaj PJ

PROVIDER: S-EPMC5024498 | biostudies-literature | 2016 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

A biomechanical comparison study of a modern fibular nail and distal fibular locking plate in AO/OTA 44C2 ankle fractures.

Switaj Paul J PJ Fuchs Daniel D Alshouli Mohammed M Patwardhan Avinash G AG Voronov Leonard I LI Muriuki Muturi M Havey Robert M RM Kadakia Anish R AR

Journal of orthopaedic surgery and research 20160915 1

<h4>Background</h4>A lateral approach with open reduction and internal fixation with a plate is a very effective technique for the majority of distal fibular fractures. However, this open approach for ankle fixation may be complicated by wound dehiscence and infection, especially in high-risk patients. An alternative to plating is an intramedullary implant, which allows maintenance of length, alignment, and rotation and which allows for decreased soft tissue dissection. While there has been clin ...[more]

PMID: 27628500

Similar Datasets

Project description:BackgroundThe role of locking plate in lateral malleolar fracture fixation for the elderly remains unclear. The aim of our study is to compare radiological and functional outcomes in older patients (> 50 years) with AO/OTA 44B lateral malleolar fractures after locking plate (PLP) or one-third non-locking tubular plate (TP) lateral fixation.MethodsWe retrospectively reviewed the medical records of 72 patients (PLP group, 34 patients; TP group, 38 patients; mean age, 61.9 ± 7.6 years; range, 51-80 years; follow-up, 1 year). Patients with open fractures, syndesmosis injuries, and a previous ankle trauma or surgery were excluded. Demographic data, union rate, complications, radiographic outcomes, visual analog scale (VAS) scores, and foot and ankle outcome scores (FAOSs) between the groups were recorded and compared. We also investigated the association of clinical features with pain and function. Statistically, the Fisher's exact test was used for categorical variables and the Mann-Whitney U test for the continuous variables. The final model for the multiple regression analysis was used to predict factors related to functional outcomes.ResultsThere were no significant between-group differences in demographic data, complication rates, immediately postoperative distal fibula lengths, ankle osteoarthritis (OA) grades, talar tilt angles (TTAs) ≥ 2°, or reduction accuracy. All fractures achieved union. The PLP group had significantly lower rates of distal screw loosening, fibula shortening > 2 mm, OA grade progression, and TTAs ≥ 2°, and better FAOSs and VAS scores than was the case for the TP group after 1 year of follow-up (all p < 0.05). The severity of OA, TTA ≥ 2°, and distal screw loosening were positively associated with VAS scores, and negatively associated with FAOSs.ConclusionsWhen treating AO/OTA 44B fractures in patients over 50 years of age, PLPs provided better VAS scores, FAOSs, and radiological outcomes, including less fibula shortening > 2 mm, less osteoarthritic (OA) ankle progression, less implant removal rate, and fewer TTAs ≥ 2° than was the case for TPs after a 1-year follow-up.Level of evidenceTherapeutic level III.

Project description:The use of low-profile dorsal and volar locking plates for distal radial fracture surgery has improved results and lowered the complication rate compared with older plate designs. The purpose of the present randomized controlled trial was to compare patient-reported outcomes as well as radiographic and functional results between patients who underwent stabilization with a volar locking plate or a dorsal locking nail-plate for the treatment of dorsally displaced unstable extra-articular distal radial fractures. One hundred and twenty patients ≥55 years of age were randomized to surgery with either a volar locking plate or a dorsal locking nail-plate and were assessed at 2 weeks, 6 weeks, 3 months, 6 months, and 1 year. The primary outcome was the abbreviated version of the Disabilities of the Arm, Shoulder and Hand (QuickDASH) score. Secondary outcomes were the Patient-Rated Wrist Evaluation (PRWE), EuroQol 5 Dimensions (EQ-5D) index and visual analog scale (VAS), range of motion, grip strength, radiographic measurements, and complication rate. The median age was 66 years (range, 55 to 88 years). The rate of follow-up was 97%. There was no clinically important difference between the groups at any point during follow-up. Patients in the volar locking plate group had better mean QuickDASH scores at 6 weeks, 6 months, and 1 year. However, the differences were small (5.8 vs. 11.3 points at 1 year; mean difference, -5.5 points [95% confidence interval (CI), -9.9 to 1.2]; p = 0.014), which is lower than any proposed minimum clinically important difference (MCID). The difference in PRWE scores was also lower than the MCID (1.0 vs. 3.5 at 1 year; mean difference, -2.5 [95% CI, -4.4 to 0.6]; p = 0.012). The dorsal locking nail-plate group had slightly better restoration of volar tilt (p = 0.011). EQ-5D index, EQ-5D VAS, range of motion, grip strength, and complication rates were similar. We found no clinically relevant difference between the volar locking plate and dorsal locking nail-plate groups after 1 year or in the time period up to 1 year. A dorsal locking nail-plate can therefore be an alternative method for the treatment of these unstable fractures or in cases in which a dorsal approach is preferable over a volar approach. Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.

Project description:BackgroundMulti-fragmentary patella fractures (MFPFs) are common patella fracture type. Low-profile plate fixation seems to be promising advancement in the treatment of such difficult fractures. There is no systematic morphologic study specifically for MFPFs to provide objective reference for the improvement of future implants and biomechanical models. This study aimed to delineate and quantify the location and spatial frequency of fracture lines, comminution zones, and coronal plane fragments in MFPFs using three-dimensional (3D) CT mapping technique.MethodsA total of 187 MFPFs were retrospectively reviewed and analyzed. Fractures were digitally reconstructed from CT data, and fracture lines, comminution zones, and coronal fragments were graphically overlaid onto a 3D patella template. Fracture characteristics were summarized qualitatively based on the fracture maps and quantitatively on the counts and volume of each fragment. Furthermore, according to the classic fracture patterns concerning MFPFs, subgroup analysis was conducted.ResultsOn average, we observed 7 fragments in each fracture, 3 of which were <1 cm3. Most fractures (81.2%) had coronal fragments on the anterior and/or posterior patella surfaces. We identified three classic patella fracture patterns: transverse with comminution, stellate, and "displaced comminuted" in 104, 54, and 29 knees, respectively. 3D maps demonstrated distinct distribution fracture patterns of fracture lines, comminution zones, and coronal fragments.ConclusionsSupero-medial corner of the patella was seldomly involved, and might be used as the cornerstone for fixation. Coronal fragments were common on both anterior and posterior patella surfaces, justifying the application of anterior plate osteosynthesis characterized by multi-planar fixation. Comminution areas mainly concentrated in the lower half of the patella, potentially suitable for an implant in combination with sutures or circumferential cerclage wiring. The described 3D features of MFPFs could provide reference for the design of future implants and biomechanical models.

Project description:BACKGROUND:Treating proximal humerus fractures can be challenging because of large metaphyseal defects that conceal anatomical landmarks. In such cases, medial cortical support with, for example, calcar screws, is mandatory. Nevertheless, varus dislocations and implant failures in patients with impaired bone quality persist. Thus, the need for effective treatment of these patients exists. Hybrid double plate osteosynthesis was introduced as an alternative, yielding similar results as calcar screws. However, a biomechanical comparison of the stability of these two techniques is pending. METHODS:Cadaveric humeral specimens were treated with plate osteosynthesis and calcar screws (group 1, n = 9) or hybrid double plate osteosynthesis (group 2, n = 9) using a proximal humerus fracture model with a two-part fracture. Displacement, stiffness, failure mode, and ultimate load were examined biomechanically in a cyclic compressive-loading scenario. RESULTS:Although the hybrid double plate osteosynthesis (group 2) tended to confer higher stiffnesses than the medial support screws at higher cycles (group 1), this trend was below the level of significance. The displacement revealed non-significantly lower values for group 1 as compared with group 2 for cycles 50 and 2000, but at 5000 cycles, group 2 offered non-significantly lower displacement values than group 1. The ultimate load tended to be non-significantly higher in the hybrid double plate osteosynthesis group (group 2: 1342±369 N, group 1: 855±408 N). Both groups yielded similar failure rates, with the majority of failures in group 2 being gap closures (n = 8), whereas those in group 1 being plate dislocations (n = 4). CONCLUSIONS:The use of an additive plate osteosynthesis in the region of the bicipital groove may be a potential alternative to the previously-established method of using calcar screws. The biomechanical data obtained in this study suggests that hybrid double plate osteosynthesis is as rigid and robust as calcar screws.

Project description:BackgroundDistal femur fractures are complex injuries with a high rate of fracture healing problems. Since the widespread of computed tomographic imaging in the diagnosis of distal femur fractures, many fracture characteristics have been discovered. This study aimed to depict the location and frequency of distal femur fracture lines and further analyze the morphological characteristics using the 3-dimensional computed tomography (CT) mapping technique, thus providing more information to solve this challenging clinical problem.MethodsIn total, 217 distal femur fractures in 216 patients were retrospectively reviewed. Fracture fragments on CT were digitally reconstructed and virtually reduced to match a template model. The contour of every fracture fragment was then marked with smooth curves, and the overlap of all fracture lines allowed for the creation of 3-dimensional fracture maps and heat maps. Fracture characteristics were summarized based on these maps.ResultsThis study included 114 left knee injuries, 101 right knee injuries, and 1 case with bilateral injury. Distal femur fractures were most likely to occur among patients aged 61 to 70 years. On the heat map of all 217 fractures, fracture line hot zones were mainly concentrated around the metaphysis, the lateral part of the intercondylar notch, and the patellofemoral joint. Distal femur fractures with three Arbeitsgemeinschaft für Osteosynthesefragen Foundation/Orthopaedic Trauma Association (AO/OTA) types demonstrated distinct fracture characteristics. In total, there were 58 coronal plane fractures (41.1%) in 141 intercondylar fractures.ConclusionsThe intercondylar fracture patterns in AO/OTA type B and type C fractures were similar, while the supracondylar characteristics in AO/OTA type A and type C were different. The findings in this study can help orthopaedic surgeons better understand the fracture morphology on the basis of AO/OTA classification. Further studies are needed to establish a standard biomechanical fracture model and new fixation strategy for better clinical outcomes.

Dataset Information

A biomechanical comparison study of a modern fibular nail and distal fibular locking plate in AO/OTA 44C2 ankle fractures.

Publications

A biomechanical comparison study of a modern fibular nail and distal fibular locking plate in AO/OTA 44C2 ankle fractures.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets