Dataset Information

Rate Constants and Activation Energies for Gas-Phase Reactions of Three Cyclic Volatile Methyl Siloxanes with the Hydroxyl Radical.

ABSTRACT: Reaction with hydroxyl radicals (OH) is the major pathway for removal of cyclic volatile methyl siloxanes (cVMS) from air. We present new measurements of second-order rate constants for reactions of the cVMS octamethylcyclotetrasiloxane (D₄), decamethylcyclopentasiloxane (D₅), and dodecamethylcyclohexasiloxane (D₆) with OH determined at temperatures between 313 and 353 K. Our measurements were made using the method of relative rates with cyclohexane as a reference substance and were conducted in a 140-mL gas-phase reaction chamber with online mass spectrometry analysis. When extrapolated to 298 K, our measured reaction rate constants of D₄ and D₅ with the OH radical are 1.9 × 10^-12 (95% confidence interval (CI): (1.7-2.2) × 10^-12) and 2.6 × 10^-12 (CI: (2.3-2.9) × 10^-12) cm³ molecule^-1 s^-1, respectively, which are 1.9× and 1.7× faster than previous measurements. Our measured rate constant for D₆ is 2.8 × 10^-12 (CI: (2.5-3.2) × 10^-12) cm³ molecule^-1 s^-1 and to our knowledge there are no comparable laboratory measurements in the literature. Reaction rates for D₅ were 33% higher than for D₄ (CI: 30-37%), whereas the rates for D₆ were only 8% higher than for D₅ (CI: 5-10%). The activation energies of the reactions of D₄, D₅, and D₆ with OH were not statistically different and had a value of 4300 ± 2800 J/mol.

SUBMITTER: Safron A

PROVIDER: S-EPMC5029797 | biostudies-literature | 2015 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Rate Constants and Activation Energies for Gas-Phase Reactions of Three Cyclic Volatile Methyl Siloxanes with the Hydroxyl Radical.

Safron Andreas A Strandell Michael M Kierkegaard Amelie A Macleod Matthew M

International journal of chemical kinetics 20150423 7

Reaction with hydroxyl radicals (OH) is the major pathway for removal of cyclic volatile methyl siloxanes (cVMS) from air. We present new measurements of second-order rate constants for reactions of the cVMS octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), and dodecamethylcyclohexasiloxane (D6) with OH determined at temperatures between 313 and 353 K. Our measurements were made using the method of relative rates with cyclohexane as a referenc ...[more]

PMID: 27708500

Similar Datasets

Project description:Many of the radical-molecule reactions are nonelementary reactions with negative activation energies, which usually proceed through two steps. They exist extensively in the atmospheric chemistry and hydrocarbon fuel combustion, so they are extensively studied both theoretically and experimentally. At the same time, various models, such as a two transition state model, a steady-state model, an equilibrium-state model, and a direct elementary dynamics model are proposed to get the kinetic parameters for the overall reaction. In this paper, a conversion temperature T C1 is defined as the temperature at which the standard molar Gibbs free energy change of the formation of the reaction complex is equal to zero, and it is found that when T ? T C1, the direct elementary dynamics model with an inclusion of the tunneling correction of the second step reaction is applicable to calculate the overall reaction rate constants for this kind of reaction system. The reaction class of hydroxyl radical addition to alkenes is chosen as the objects of this study, five reactions are chosen as the representative for the reaction class, and their single-point energies are calculated using the method of CCSD(T)/CBS, and it is shown that the highest conversion temperature for the five reactions is 139.89 K, far below the usual initial low-temperature (550 K) oxidation chemistry of hydrocarbon fuels; therefore, the steady-state approximation method is applicable. All geometry optimizations are performed at the BH&HLYP/6-311+G(d,p) level, and the result shows that the geometric parameters in the reaction centers are conserved; hence, the isodesmic reaction method is applicable to this reaction class. To validate the accuracy of this scheme, a comparison of electronic energy difference at the BH&HLYP/6-311+G(d,p) level and the corrected electronic energy difference with the electronic energy difference at the CCSD(T)/CBS level is performed for the five representative reactions, and it is shown that the maximum absolute deviation of electronic energy difference can be reduced from 2.54 kcal·mol-1 before correction to 0.58 kcal·mol-1 after correction, indicating that the isodesmic reaction method is applicable for the accurate calculation of the kinetic parameters for large-size molecular systems with a negative activation energy reaction. The overall rate constants for 44 reactions of the reaction class of hydroxyl radical addition to alkenes are calculated using the transition-state theory in combination with the isodesmic correction scheme, and high-pressure limit rate rules for the reaction class are developed. In addition, the thermodynamic parameter is calculated and the results indicate that our dynamics model is applicable for our studied reaction class. A chemical kinetic modeling and sensitivity analysis using the calculated kinetic data is performed for the combustion of ethene, and the results indicate the studied reaction is important for the low-to-medium temperature combustion modeling of ethene.

Project description:Advanced oxidation treatment processes used in various applications to treat contaminated soil, water, and groundwater involve powerful radical intermediates, including hydroxyl radicals (•OH). Inefficiency in •OH-driven treatment systems involves scavenging reactions where •OH react with non-target species in the aqueous and solid phases. Here, •OH were generated in iron (Fe)- and UV-activated hydrogen peroxide (Fe-AHP, UV-AHP) systems where the loss of rhodamine B served as a quantitative metric for •OH activity. Kinetic analysis methods were developed to estimate the specific •OH surface scavenging rate constant (k≡S). In the Fe-AHP system, k≡S for silica (2.85 × 106 1/m2 × s) and alumina (3.92 × 106 1/m2 × s) were similar. In the UV-AHP system, estimates of k≡S for silica (4.50 × 106 1/m2 × s) and alumina (7.45 × 106 1/m2 × s) were higher. k≡S for montmorillonite (MMT) in the UV-AHP system was ≤4.22 × 105 1/m2 × s. Overall, k≡S,silica ∼ k≡S, alumina > k≡S,MMT indicating k≡S is mineral specific. Radical scavenging was dominated by surface scavenging at 10-50 g/L silica, alumina, or MMT, in both Fe-AHP and UV-AHP systems. The experimentally-derived surface •OH scavenging rate constants were extended to in-situ chemical oxidation (ISCO) treatment conditions to contrast •OH reaction rates with contaminant and aqueous phase reactants found in aquifer systems. •OH reaction was dominated by solid surfaces comprised of silica, alumina, and montmorillonite minerals relative to •OH reaction with trichloroethylene, the target compound, and H2O2, a well-documented radical scavenger. These results indicate that solid mineral surfaces play a key role in limiting the degradation rate of contaminants found in soil and groundwater, and the overall treatment efficiency in ISCO systems. The aggressive •OH scavenging measured was partially attributed to the relative abundance of scavenging sites on mineral surfaces.

Dataset Information

Rate Constants and Activation Energies for Gas-Phase Reactions of Three Cyclic Volatile Methyl Siloxanes with the Hydroxyl Radical.

Publications

Rate Constants and Activation Energies for Gas-Phase Reactions of Three Cyclic Volatile Methyl Siloxanes with the Hydroxyl Radical.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets