Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Data on the mixing of non-Newtonian fluids by a Rushton turbine in a cylindrical tank.

ABSTRACT: The paper focuses on the data collected from the mixing of shear thinning non-Newtonian fluids in a cylindrical tank by a Rushton turbine. The data presented are obtained by using Computational Fluid Dynamics (CFD) simulation of fluid flow field in the entire tank volume. The CFD validation data for this study is reported in the research article 'Numerical investigation of hydrodynamic behavior of shear thinning fluids in stirred tank' (Khapre and Munshi, 2015) [1]. The tracer injection method is used for the prediction of mixing time and mixing efficiency of a Rushton turbine impeller.

SUBMITTER: Khapre A

PROVIDER: S-EPMC5036514 | biostudies-literature | 2016 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Data on the mixing of non-Newtonian fluids by a Rushton turbine in a cylindrical tank.

Khapre Akhilesh A Munshi Basudeb B

Data in brief 20160816

The paper focuses on the data collected from the mixing of shear thinning non-Newtonian fluids in a cylindrical tank by a Rushton turbine. The data presented are obtained by using Computational Fluid Dynamics (CFD) simulation of fluid flow field in the entire tank volume. The CFD validation data for this study is reported in the research article 'Numerical investigation of hydrodynamic behavior of shear thinning fluids in stirred tank' (Khapre and Munshi, 2015) [1]. The tracer injection method i ...[more]

PMID: 27699186

Similar Datasets

Data on the agitation of a viscous Newtonian fluid by radial impellers in a cylindrical tank.

Project description:In this paper, the data assembled concerning the agitation of a Newtonian fluid in a cylindrical vessel is disclosed. The stirred vessel is not provided with baffles and has a flat-bottom. The data presents some information on the characteristics of two impellers: a six-blade Rushton turbine and a six-blade paddle impeller. The flow patterns generated by both impellers are depicted and compared. Also, the power required when changing the impeller rotational speed is given. The data summarized here via three-dimensional calculations of velocities and viscous dissipation in the whole volume of the tank provides additional knowledge for the best choice of impellers for each industrial process.

| S-EPMC5671471 | biostudies-literature

Electro-osmotic mobility of non-Newtonian fluids.

Project description:Electrokinetically driven microfluidic devices are usually used to analyze and process biofluids which can be classified as non-Newtonian fluids. Conventional electrokinetic theories resulting from Newtonian hydrodynamics then fail to describe the behaviors of these fluids. In this study, a theoretical analysis of electro-osmotic mobility of non-Newtonian fluids is reported. The general Cauchy momentum equation is simplified by incorporation of the Gouy-Chapman solution to the Poisson-Boltzmann equation and the Carreau fluid constitutive model. Then a nonlinear ordinary differential equation governing the electro-osmotic velocity of Carreau fluids is obtained and solved numerically. The effects of the Weissenberg number (Wi), the surface zeta potential (ψ¯s), the power-law exponent(n), and the transitional parameter (β) on electro-osmotic mobility are examined. It is shown that the results presented in this study for the electro-osmotic mobility of Carreau fluids are quite general so that the electro-osmotic mobility for the Newtonian fluids and the power-law fluids can be obtained as two limiting cases.

| S-EPMC3078153 | biostudies-other

3D-Printed Capillary Circuits for Calibration-Free Viscosity Measurement of Newtonian and Non-Newtonian Fluids.

Project description:Measuring viscosity is important for the quality assurance of liquid products, as well as for monitoring the viscosity of clinical fluids as a potential hemodynamic biomarker. However, conventional viscometers and their microfluidic counterparts typically rely on bulky and expensive equipment, and lack the ability for rapid and field-deployable viscosity analysis. To address these challenges, we describe 3D-printed capillary circuits (3D-CCs) for equipment- and calibration-free viscosity measurement of Newtonian and non-Newtonian fluids. A syringe, modified with an air chamber serving as a pressure buffer, generates and maintains a set pressure to drive the pressure-driven flows of test fluids through the 3D-CCs. The graduated fluidic chambers of the 3D-CCs serve as a flow meter, enabling simple measurement of the flow rates of the test fluids flowing through the 3D-CCs, which is readable with the naked eye. The viscosities of the test fluids can be simply calculated from the measured flow rates under a set pressure condition without the need for peripheral equipment and calibration. We demonstrate the multiplexing capability of the 3D-CC platform by simultaneously measuring different Newtonian-fluid samples. Further, we demonstrate that the shear-rate dependence of the viscosity of a non-Newtonian fluid can be analyzed simultaneously under various shear-rate conditions with the 3D-CC platform.

| S-EPMC6082256 | biostudies-literature

High-velocity impact of solid objects on Non-Newtonian Fluids.

Project description:We investigate which property of non-Newtonian fluids determines the deceleration of a high-speed impacting object. Using high-speed camera footage, we measure the velocity decrease of a high-speed spherical object impacting a typical Newtonian fluid (water) as a reference and compare it with a shear thickening fluid (cornstarch) and a shear thinning viscoelastic fluid (a weakly cross-linked polymer gel). Three models describing the kinetic energy loss of the object are considered: fluid inertia, shear thickening and viscoelasticity. By fitting the three models to the experimental data, we conclude that the viscoelastic model works best for both the cornstarch and the polymer gel. Since the cornstarch is also viscoelastic, we conclude that the ability to stop objects of these complex fluids is given by their viscoelasticity rather than shear thickening or shear thinning.

| S-EPMC6362045 | biostudies-literature

Tuning Alginate Microparticle Size via Atomization of Non-Newtonian Fluids.

Project description:A new approach based on the atomization of non-Newtonian fluids has been proposed to produce microparticles for a potential inhalation route. In particular, different solutions of alginate were atomized on baths of different crosslinkers, piperazine and barium chloride, obtaining microparticles around 5 and 40 microns, respectively. These results were explained as a consequence of the different viscoelastic properties, since oscillatory analysis indicated that the formed hydrogel beads with barium chloride had a higher storage modulus (1000 Pa) than the piperazine ones (20 Pa). Pressure ratio (polymer solution-air) was identified as a key factor, and it should be from 0.85 to 1.00 to ensure a successful atomization, obtaining the smallest particle size at intermediate pressures. Finally, a numerical study based on dimensionless numbers was performed to predict particle size depending on the conditions. These results highlight that it is possible to control the microparticles size by modifying either the viscoelasticity of the hydrogel or the experimental conditions of atomization. Some experimental conditions (using piperazine) reduce the particle size up to 5 microns and therefore allow their use by aerosol inhalation.

| S-EPMC8709414 | biostudies-literature

Rheology of particulate suspensions with non-Newtonian fluids in capillaries.

Project description:Particulate suspensions occur in situations from blood flow to slurries in drilling applications. Existing investigations of these suspensions generally concentrate on the impact of particle volume fraction for suspensions in Newtonian fluids under free-flow conditions. Recently, particulate-polymer composites have been used in additive manufacturing (AM). Here, the polymer becomes a shear-thinning non-Newtonian fluid during extrusion, creating a particulate suspension. Motivated by the challenges in AM of particulate composites, this study investigates the rheology of suspensions of micrometre-sized particles in shear-thinning silicone while extruded through AM-scaled nozzles (millimetre-scale diameters). The suspensions were observed to follow a power-law behaviour and their rheology was investigated through the measured flow consistency ( K ) and behaviour ( n ) indices. The impact of the particle volume fraction ( ϕ ) and the ratio ( ω ) of the capillary inside diameter to the particle diameter on both indices were measured. n was found to be only impacted by the suspension fluid type and ϕ . K was found to be constant at large ω , but decreased and then increased to infinity with ω decreasing. Based on its behaviour, K was categorized into two conditions and analysed separately with semi-empirical models. The impact of particle size distribution was also investigated.

| S-EPMC9199073 | biostudies-literature

Multiscale modeling of composite cylindrical tank.

Project description:This article provides the useful data information on multiscale modeling of liquid storage laminated composite cylindrical tank under seismic load. The investigation process is divided into three levels. Within the numerical homogenization, the hexagonal microstructure one-eighth and full RVE model is assumed on micro-scale level. Homogenization of unidirectional lamina is done in four steps. For effective material properties of the whole laminate, the laminated representative volume element is assumed on meso-scale level. The numerical homogenization is done by using the Finite Element Method in the program ANSYS. Effective modulus of elasticity is taken into the calculation of internal forces of the laminated composite cylindrical tank on macro-scale level. The base shears bottom of tank wall and tank base, the bending moment above the base plate, and overturning moment bellow the base plate as function of the tank fluid filling are presented. Data inform about seismic response of liquid laminated composite tank during seismic even in Slovak Republic, respecting of Eurocode 8 recommendations.

| S-EPMC5998220 | biostudies-literature

Mathematical modelling with experimental validation of viscoelastic properties in non-Newtonian fluids.

Project description:The paper proposes a mathematical framework for the use of fractional-order impedance models to capture fluid mechanics properties in frequency-domain experimental datasets. An overview of non-Newtonian (NN) fluid classification is given as to motivate the use of fractional-order models as natural solutions to capture fluid dynamics. Four classes of fluids are tested: oil, sugar, detergent and liquid soap. Three nonlinear identification methods are used to fit the model: nonlinear least squares, genetic algorithms and particle swarm optimization. The model identification results obtained from experimental datasets suggest the proposed model is useful to characterize various degree of viscoelasticity in NN fluids. The advantage of the proposed model is that it is compact, while capturing the fluid properties and can be identified in real-time for further use in prediction or control applications. This article is part of the theme issue 'Advanced materials modelling via fractional calculus: challenges and perspectives'.

| S-EPMC7287316 | biostudies-literature

Flat Wall Proximity Effect on Micro-Particle Sedimentation in Non-Newtonian Fluids.

Project description:We investigate the sedimentation of colloidal micro-spheres and red blood cells (RBCs) in non-Newtonian fluid - silicone oil with different viscosities. We use digital holographic microscopy (DHM) to obtain volumetric information of the sedimenting micro-objects. Especially, the numerical refocusing feature of DHM is used to extract the depth information of multiple particles moving inside the fluid. The effects of proximity to a flat wall and the non-Newtonian behavior on the sedimenting micro-spheres and RBCs are studied by trajectory analyzing and velocimetry. We observe that for lower viscosity values the proximity effect is more pronounced. The variation rate of the particle falling velocities versus their distance to the flat wall decreases by increasing the viscosity of the fluid. For RBCs, however, the decreasing of the velocity variations have a smoother trend. The experimental results verify the theoretical prediction that, similar to Newtonian case, a correction factor in Stokes' law suffices for describing the wall effect.

| S-EPMC7026440 | biostudies-literature

A passive Stokes flow rectifier for Newtonian fluids.

Project description:Non-linear effects of the Navier-Stokes equations disappear under the Stokes regime of Newtonian fluid flows disallowing a flow rectification behavior. Here we show that passive flow rectification of Newtonian fluids is obtainable under the Stokes regime of both compressible and incompressible flows by introducing nonlinearity into the otherwise linear Stokes equations. Asymmetric flow resistances arise in shallow nozzle/diffuser microchannels with deformable ceiling, in which the fluid flow is governed by a non-linear coupled fluid-solid mechanics equation. The proposed model captures the unequal deflection profile of the deformable ceiling depending on the flow direction under the identical applied pressure, permitting a larger flow rate in the nozzle configuration. Ultra-low aspect ratio microchannels sealed by a flexible membrane have been fabricated to demonstrate passive flow rectification for low-Reynolds-number flows (0.001 < Re < 10) of common Newtonian fluids such as water, methanol, and isopropyl alcohol. The proposed rectification mechanism is also extended to compressible flows, leading to the first demonstration of rectifying equilibrium gas flows under the Stokes flow regime. While the maximum rectification ratio experimentally obtained in this work is limited to 1.41, a higher value up to 1.76 can be achieved by optimizing the width profile of the asymmetric microchannels.

| S-EPMC8119468 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data